ARM: OMAP2+: nand: Fix NAND on OMAP2 and OMAP3 boards

commit 5005e0b7 upstream.

Commit c66d0391 broke NAND for non-DT boot on all OMAP2 and OMAP3
boards using board_nand_init(). Following error is seen at boot

[    0.154998]  (null): Unsupported NAND ECC scheme selected

For OMAP2 and OMAP3 platforms, the ecc_opt parameter in platform data
must be set to OMAP_ECC_HAM1_CODE_HW to work properly.

Tested on omap3-beagle c4.

Fixes: c66d0391 (mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes)
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

arch/arm/mach-omap2/board-flash.c

@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
 
-	board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
+	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */