Commit 8c5823ef authored by Takashi Iwai's avatar Takashi Iwai

ALSA: azt3328: Allocate resources with device-managed APIs

This patch converts the resource management in PCI azt3328 driver with
devres as a clean up.  Each manual resource management is converted
with the corresponding devres helper, and the card object release is
managed now via card->private_free instead of a lowlevel snd_device.

This should give no user-visible functional changes.

Link: https://lore.kernel.org/r/20210715075941.23332-12-tiwai@suse.deSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 0e175f66
......@@ -2244,32 +2244,15 @@ snd_azf3328_timer(struct snd_azf3328 *chip, int device)
/******************************************************************/
static int
snd_azf3328_free(struct snd_azf3328 *chip)
static void
snd_azf3328_free(struct snd_card *card)
{
if (chip->irq < 0)
goto __end_hw;
struct snd_azf3328 *chip = card->private_data;
snd_azf3328_mixer_reset(chip);
snd_azf3328_timer_stop(chip->timer);
snd_azf3328_gameport_free(chip);
__end_hw:
if (chip->irq >= 0)
free_irq(chip->irq, chip);
pci_release_regions(chip->pci);
pci_disable_device(chip->pci);
kfree(chip);
return 0;
}
static int
snd_azf3328_dev_free(struct snd_device *device)
{
struct snd_azf3328 *chip = device->device_data;
return snd_azf3328_free(chip);
}
#if 0
......@@ -2350,29 +2333,18 @@ snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip)
static int
snd_azf3328_create(struct snd_card *card,
struct pci_dev *pci,
unsigned long device_type,
struct snd_azf3328 **rchip)
unsigned long device_type)
{
struct snd_azf3328 *chip;
struct snd_azf3328 *chip = card->private_data;
int err;
static const struct snd_device_ops ops = {
.dev_free = snd_azf3328_dev_free,
};
u8 dma_init;
enum snd_azf3328_codec_type codec_type;
struct snd_azf3328_codec_data *codec_setup;
*rchip = NULL;
err = pci_enable_device(pci);
err = pcim_enable_device(pci);
if (err < 0)
return err;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (chip == NULL) {
err = -ENOMEM;
goto out_err;
}
spin_lock_init(&chip->reg_lock);
chip->card = card;
chip->pci = pci;
......@@ -2383,13 +2355,12 @@ snd_azf3328_create(struct snd_card *card,
dev_err(card->dev,
"architecture does not support 24bit PCI busmaster DMA\n"
);
err = -ENXIO;
goto out_err;
return -ENXIO;
}
err = pci_request_regions(pci, "Aztech AZF3328");
if (err < 0)
goto out_err;
return err;
chip->ctrl_io = pci_resource_start(pci, 0);
chip->game_io = pci_resource_start(pci, 1);
......@@ -2415,26 +2386,22 @@ snd_azf3328_create(struct snd_card *card,
codec_setup->type = AZF_CODEC_I2S_OUT;
codec_setup->name = "I2S_OUT";
if (request_irq(pci->irq, snd_azf3328_interrupt,
IRQF_SHARED, KBUILD_MODNAME, chip)) {
if (devm_request_irq(&pci->dev, pci->irq, snd_azf3328_interrupt,
IRQF_SHARED, KBUILD_MODNAME, chip)) {
dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
err = -EBUSY;
goto out_err;
return -EBUSY;
}
chip->irq = pci->irq;
card->sync_irq = chip->irq;
card->private_free = snd_azf3328_free;
pci_set_master(pci);
snd_azf3328_debug_show_ports(chip);
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
if (err < 0)
goto out_err;
/* create mixer interface & switches */
err = snd_azf3328_mixer_new(chip);
if (err < 0)
goto out_err;
return err;
/* standard codec init stuff */
/* default DMA init value */
......@@ -2456,18 +2423,7 @@ snd_azf3328_create(struct snd_card *card,
spin_unlock_irq(codec->lock);
}
*rchip = chip;
err = 0;
goto out;
out_err:
if (chip)
snd_azf3328_free(chip);
pci_disable_device(pci);
out:
return err;
return 0;
}
static int
......@@ -2479,29 +2435,25 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
struct snd_opl3 *opl3;
int err;
if (dev >= SNDRV_CARDS) {
err = -ENODEV;
goto out;
}
if (dev >= SNDRV_CARDS)
return -ENODEV;
if (!enable[dev]) {
dev++;
err = -ENOENT;
goto out;
return -ENOENT;
}
err = snd_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE,
0, &card);
err = snd_devm_card_new(&pci->dev, index[dev], id[dev], THIS_MODULE,
sizeof(*chip), &card);
if (err < 0)
goto out;
return err;
chip = card->private_data;
strcpy(card->driver, "AZF3328");
strcpy(card->shortname, "Aztech AZF3328 (PCI168)");
err = snd_azf3328_create(card, pci, pci_id->driver_data, &chip);
err = snd_azf3328_create(card, pci, pci_id->driver_data);
if (err < 0)
goto out_err;
card->private_data = chip;
return err;
/* chose to use MPU401_HW_AZT2320 ID instead of MPU401_HW_MPU401,
since our hardware ought to be similar, thus use same ID. */
......@@ -2515,16 +2467,16 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
dev_err(card->dev, "no MPU-401 device at 0x%lx?\n",
chip->mpu_io
);
goto out_err;
return err;
}
err = snd_azf3328_timer(chip, 0);
if (err < 0)
goto out_err;
return err;
err = snd_azf3328_pcm(chip);
if (err < 0)
goto out_err;
return err;
if (snd_opl3_create(card, chip->opl3_io, chip->opl3_io+2,
OPL3_HW_AUTO, 1, &opl3) < 0) {
......@@ -2535,10 +2487,10 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
/* need to use IDs 1, 2 since ID 0 is snd_azf3328_timer above */
err = snd_opl3_timer_new(opl3, 1, 2);
if (err < 0)
goto out_err;
return err;
err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
if (err < 0)
goto out_err;
return err;
opl3->private_data = chip;
}
......@@ -2547,7 +2499,7 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
err = snd_card_register(card);
if (err < 0)
goto out_err;
return err;
#ifdef MODULE
dev_info(card->dev,
......@@ -2565,22 +2517,7 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
pci_set_drvdata(pci, card);
dev++;
err = 0;
goto out;
out_err:
dev_err(card->dev, "something failed, exiting\n");
snd_card_free(card);
out:
return err;
}
static void
snd_azf3328_remove(struct pci_dev *pci)
{
snd_card_free(pci_get_drvdata(pci));
return 0;
}
#ifdef CONFIG_PM_SLEEP
......@@ -2709,7 +2646,6 @@ static struct pci_driver azf3328_driver = {
.name = KBUILD_MODNAME,
.id_table = snd_azf3328_ids,
.probe = snd_azf3328_probe,
.remove = snd_azf3328_remove,
.driver = {
.pm = SND_AZF3328_PM_OPS,
},
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment