Merge series "ASoC: sdm845: fix soundwire stream handling" from Srinivas...

Merge series "ASoC: sdm845: fix soundwire stream handling" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

Recent addition of SoundWire stream state-machine checks in linux-next
have shown an existing issue with handling soundwire streams in codec drivers.

In general soundwire stream prepare/enable/disable can be called from either
codec/machine/controller driver. However calling it in codec driver means
that if multiple instances(Left/Right speakers) of the same codec is
connected to the same stream then it will endup calling stream
prepare/enable/disable more than once. This will mess up the stream
state-machine checks in the soundwire core.

Moving this stream handling to machine driver would fix this issue
and also allow board/platform specfic power sequencing.

Changes since v1:
	- removed false error check while setting sruntime.

Srinivas Kandagatla (2):
  ASoC: qcom: sdm845: handle soundwire stream
  ASoC: codecs: wsa881x: remove soundwire stream handling

 sound/soc/codecs/wsa881x.c | 44 +------------------------
 sound/soc/qcom/Kconfig     |  2 +-
 sound/soc/qcom/sdm845.c    | 67 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 69 insertions(+), 44 deletions(-)

--
2.21.0

sound/soc/codecs/wsa881x.c

@@ -676,7 +676,6 @@ struct wsa881x_priv {
 	int active_ports;
 	bool port_prepared[WSA881X_MAX_SWR_PORTS];
 	bool port_enable[WSA881X_MAX_SWR_PORTS];
-	bool stream_prepared;
 };
 
 static void wsa881x_init(struct wsa881x_priv *wsa881x)
@@ -954,41 +953,6 @@ static const struct snd_soc_dapm_widget wsa881x_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("SPKR"),
 };
 
-static int wsa881x_prepare(struct snd_pcm_substream *substream,
-			   struct snd_soc_dai *dai)
-{
-	struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev);
-	int ret;
-
-	if (wsa881x->stream_prepared) {
-		sdw_disable_stream(wsa881x->sruntime);
-		sdw_deprepare_stream(wsa881x->sruntime);
-		wsa881x->stream_prepared = false;
-	}
-
-
-	ret = sdw_prepare_stream(wsa881x->sruntime);
-	if (ret)
-		return ret;
-
-	/**
-	 * NOTE: there is a strict hw requirement about the ordering of port
-	 * enables and actual PA enable. PA enable should only happen after
-	 * soundwire ports are enabled if not DC on the line is accumulated
-	 * resulting in Click/Pop Noise
-	 * PA enable/mute are handled as part of DAPM and digital mute.
-	 */
-
-	ret = sdw_enable_stream(wsa881x->sruntime);
-	if (ret) {
-		sdw_deprepare_stream(wsa881x->sruntime);
-		return ret;
-	}
-	wsa881x->stream_prepared = true;
-
-	return ret;
-}
-
 static int wsa881x_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_pcm_hw_params *params,
 			     struct snd_soc_dai *dai)
@@ -1016,12 +980,7 @@ static int wsa881x_hw_free(struct snd_pcm_substream *substream,
 {
 	struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev);
 
-	if (wsa881x->stream_prepared) {
-		sdw_disable_stream(wsa881x->sruntime);
-		sdw_deprepare_stream(wsa881x->sruntime);
 	sdw_stream_remove_slave(wsa881x->slave, wsa881x->sruntime);
-		wsa881x->stream_prepared = false;
-	}
 
 	return 0;
 }
@@ -1052,7 +1011,6 @@ static int wsa881x_digital_mute(struct snd_soc_dai *dai, int mute, int stream)
 
 static struct snd_soc_dai_ops wsa881x_dai_ops = {
 	.hw_params = wsa881x_hw_params,
-	.prepare = wsa881x_prepare,
 	.hw_free = wsa881x_hw_free,
 	.mute_stream = wsa881x_digital_mute,
 	.set_sdw_stream = wsa881x_set_sdw_stream,

sound/soc/qcom/Kconfig

@@ -99,7 +99,7 @@ config SND_SOC_MSM8996
 
 config SND_SOC_SDM845
 	tristate "SoC Machine driver for SDM845 boards"
-	depends on QCOM_APR && CROS_EC && I2C
+	depends on QCOM_APR && CROS_EC && I2C && SOUNDWIRE
 	select SND_SOC_QDSP6
 	select SND_SOC_QCOM_COMMON
 	select SND_SOC_RT5663

sound/soc/qcom/sdm845.c

@@ -11,6 +11,7 @@
 #include <sound/pcm_params.h>
 #include <sound/jack.h>
 #include <sound/soc.h>
+#include <linux/soundwire/sdw.h>
 #include <uapi/linux/input-event-codes.h>
 #include "common.h"
 #include "qdsp6/q6afe.h"
@@ -31,10 +32,12 @@
 struct sdm845_snd_data {
 	struct snd_soc_jack jack;
 	bool jack_setup;
+	bool stream_prepared[SLIM_MAX_RX_PORTS];
 	struct snd_soc_card *card;
 	uint32_t pri_mi2s_clk_count;
 	uint32_t sec_mi2s_clk_count;
 	uint32_t quat_tdm_clk_count;
+	struct sdw_stream_runtime *sruntime[SLIM_MAX_RX_PORTS];
 };
 
 static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28};
@@ -45,11 +48,18 @@ static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	struct snd_soc_dai *codec_dai;
+	struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
 	u32 rx_ch[SLIM_MAX_RX_PORTS], tx_ch[SLIM_MAX_TX_PORTS];
+	struct sdw_stream_runtime *sruntime;
 	u32 rx_ch_cnt = 0, tx_ch_cnt = 0;
 	int ret = 0, i;
 
 	for_each_rtd_codec_dais(rtd, i, codec_dai) {
+		sruntime = snd_soc_dai_get_sdw_stream(codec_dai,
+						      substream->stream);
+		if (sruntime != ERR_PTR(-ENOTSUPP))
+			pdata->sruntime[cpu_dai->id] = sruntime;
+
 		ret = snd_soc_dai_get_channel_map(codec_dai,
 				&tx_ch_cnt, tx_ch, &rx_ch_cnt, rx_ch);
 
@@ -425,8 +435,65 @@ static void  sdm845_snd_shutdown(struct snd_pcm_substream *substream)
 	}
 }
 
+static int sdm845_snd_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+	int ret;
+
+	if (!sruntime)
+		return 0;
+
+	if (data->stream_prepared[cpu_dai->id]) {
+		sdw_disable_stream(sruntime);
+		sdw_deprepare_stream(sruntime);
+		data->stream_prepared[cpu_dai->id] = false;
+	}
+
+	ret = sdw_prepare_stream(sruntime);
+	if (ret)
+		return ret;
+
+	/**
+	 * NOTE: there is a strict hw requirement about the ordering of port
+	 * enables and actual WSA881x PA enable. PA enable should only happen
+	 * after soundwire ports are enabled if not DC on the line is
+	 * accumulated resulting in Click/Pop Noise
+	 * PA enable/mute are handled as part of codec DAPM and digital mute.
+	 */
+
+	ret = sdw_enable_stream(sruntime);
+	if (ret) {
+		sdw_deprepare_stream(sruntime);
+		return ret;
+	}
+	data->stream_prepared[cpu_dai->id] = true;
+
+	return ret;
+}
+
+static int sdm845_snd_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+
+	if (sruntime && data->stream_prepared[cpu_dai->id]) {
+		sdw_disable_stream(sruntime);
+		sdw_deprepare_stream(sruntime);
+		data->stream_prepared[cpu_dai->id] = false;
+	}
+
+	return 0;
+}
+
 static const struct snd_soc_ops sdm845_be_ops = {
 	.hw_params = sdm845_snd_hw_params,
+	.hw_free = sdm845_snd_hw_free,
+	.prepare = sdm845_snd_prepare,
 	.startup = sdm845_snd_startup,
 	.shutdown = sdm845_snd_shutdown,
 };