net: dsa: tag_sja1105: stop asking the sja1105 driver in sja1105_xmit_tpid

Introduced in commit 38b5beea ("net: dsa: sja1105: prepare tagger
for handling DSA tags and VLAN simultaneously"), the sja1105_xmit_tpid
function solved quite a different problem than our needs are now.

Then, we used best-effort VLAN filtering and we were using the xmit_tpid
to tunnel packets coming from an 8021q upper through the TX VLAN allocated
by tag_8021q to that egress port. The need for a different VLAN protocol
depending on switch revision came from the fact that this in itself was
more of a hack to trick the hardware into accepting tunneled VLANs in
the first place.

Right now, we deny 8021q uppers (see sja1105_prechangeupper). Even if we
supported them again, we would not do that using the same method of
{tunneling the VLAN on egress, retagging the VLAN on ingress} that we
had in the best-effort VLAN filtering mode. It seems rather simpler that
we just allocate a VLAN in the VLAN table that is simply not used by the
bridge at all, or by any other port.

Anyway, I have 2 gripes with the current sja1105_xmit_tpid:

1. When sending packets on behalf of a VLAN-aware bridge (with the new
   TX forwarding offload framework) plus untagged (with the tag_8021q
   VLAN added by the tagger) packets, we can see that on SJA1105P/Q/R/S
   and later (which have a qinq_tpid of ETH_P_8021AD), some packets sent
   through the DSA master have a VLAN protocol of 0x8100 and others of
   0x88a8. This is strange and there is no reason for it now. If we have
   a bridge and are therefore forced to send using that bridge's TPID,
   we can as well blend with that bridge's VLAN protocol for all packets.

2. The sja1105_xmit_tpid introduces a dependency on the sja1105 driver,
   because it looks inside dp->priv. It is desirable to keep as much
   separation between taggers and switch drivers as possible. Now it
   doesn't do that anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/sja1105/sja1105.h

@@ -115,12 +115,6 @@ struct sja1105_info {
 	const struct sja1105_dynamic_table_ops *dyn_ops;
 	const struct sja1105_table_ops *static_ops;
 	const struct sja1105_regs *regs;
-	/* Both E/T and P/Q/R/S have quirks when it comes to popping the S-Tag
-	 * from double-tagged frames. E/T will pop it only when it's equal to
-	 * TPID from the General Parameters Table, while P/Q/R/S will only
-	 * pop it when it's equal to TPID2.
-	 */
-	u16 qinq_tpid;
 	bool can_limit_mcast_flood;
 	int (*reset_cmd)(struct dsa_switch *ds);
 	int (*setup_rgmii_delay)(const void *ctx, int port);

drivers/net/dsa/sja1105/sja1105_main.c

@@ -2295,15 +2295,6 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled,
 		tpid2 = ETH_P_SJA1105;
 	}
 
-	for (port = 0; port < ds->num_ports; port++) {
-		struct sja1105_port *sp = &priv->ports[port];
-
-		if (enabled)
-			sp->xmit_tpid = priv->info->qinq_tpid;
-		else
-			sp->xmit_tpid = ETH_P_SJA1105;
-	}
-
 	if (priv->vlan_aware == enabled)
 		return 0;
 
@@ -2988,7 +2979,6 @@ static int sja1105_setup_ports(struct sja1105_private *priv)
 		}
 		sp->xmit_worker = worker;
 		skb_queue_head_init(&sp->xmit_queue);
-		sp->xmit_tpid = ETH_P_SJA1105;
 	}
 
 	return 0;

drivers/net/dsa/sja1105/sja1105_spi.c

@@ -575,7 +575,6 @@ const struct sja1105_info sja1105e_info = {
 	.part_no		= SJA1105ET_PART_NO,
 	.static_ops		= sja1105e_table_ops,
 	.dyn_ops		= sja1105et_dyn_ops,
-	.qinq_tpid		= ETH_P_8021Q,
 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
 	.can_limit_mcast_flood	= false,
 	.ptp_ts_bits		= 24,
@@ -608,7 +607,6 @@ const struct sja1105_info sja1105t_info = {
 	.part_no		= SJA1105ET_PART_NO,
 	.static_ops		= sja1105t_table_ops,
 	.dyn_ops		= sja1105et_dyn_ops,
-	.qinq_tpid		= ETH_P_8021Q,
 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
 	.can_limit_mcast_flood	= false,
 	.ptp_ts_bits		= 24,
@@ -641,7 +639,6 @@ const struct sja1105_info sja1105p_info = {
 	.part_no		= SJA1105P_PART_NO,
 	.static_ops		= sja1105p_table_ops,
 	.dyn_ops		= sja1105pqrs_dyn_ops,
-	.qinq_tpid		= ETH_P_8021AD,
 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
 	.can_limit_mcast_flood	= true,
 	.ptp_ts_bits		= 32,
@@ -675,7 +672,6 @@ const struct sja1105_info sja1105q_info = {
 	.part_no		= SJA1105Q_PART_NO,
 	.static_ops		= sja1105q_table_ops,
 	.dyn_ops		= sja1105pqrs_dyn_ops,
-	.qinq_tpid		= ETH_P_8021AD,
 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
 	.can_limit_mcast_flood	= true,
 	.ptp_ts_bits		= 32,
@@ -709,7 +705,6 @@ const struct sja1105_info sja1105r_info = {
 	.part_no		= SJA1105R_PART_NO,
 	.static_ops		= sja1105r_table_ops,
 	.dyn_ops		= sja1105pqrs_dyn_ops,
-	.qinq_tpid		= ETH_P_8021AD,
 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
 	.can_limit_mcast_flood	= true,
 	.ptp_ts_bits		= 32,
@@ -747,7 +742,6 @@ const struct sja1105_info sja1105s_info = {
 	.static_ops		= sja1105s_table_ops,
 	.dyn_ops		= sja1105pqrs_dyn_ops,
 	.regs			= &sja1105pqrs_regs,
-	.qinq_tpid		= ETH_P_8021AD,
 	.tag_proto		= DSA_TAG_PROTO_SJA1105,
 	.can_limit_mcast_flood	= true,
 	.ptp_ts_bits		= 32,
@@ -784,7 +778,6 @@ const struct sja1105_info sja1110a_info = {
 	.static_ops		= sja1110_table_ops,
 	.dyn_ops		= sja1110_dyn_ops,
 	.regs			= &sja1110_regs,
-	.qinq_tpid		= ETH_P_8021AD,
 	.tag_proto		= DSA_TAG_PROTO_SJA1110,
 	.can_limit_mcast_flood	= true,
 	.multiple_cascade_ports	= true,
@@ -835,7 +828,6 @@ const struct sja1105_info sja1110b_info = {
 	.static_ops		= sja1110_table_ops,
 	.dyn_ops		= sja1110_dyn_ops,
 	.regs			= &sja1110_regs,
-	.qinq_tpid		= ETH_P_8021AD,
 	.tag_proto		= DSA_TAG_PROTO_SJA1110,
 	.can_limit_mcast_flood	= true,
 	.multiple_cascade_ports	= true,
@@ -886,7 +878,6 @@ const struct sja1105_info sja1110c_info = {
 	.static_ops		= sja1110_table_ops,
 	.dyn_ops		= sja1110_dyn_ops,
 	.regs			= &sja1110_regs,
-	.qinq_tpid		= ETH_P_8021AD,
 	.tag_proto		= DSA_TAG_PROTO_SJA1110,
 	.can_limit_mcast_flood	= true,
 	.multiple_cascade_ports	= true,
@@ -937,7 +928,6 @@ const struct sja1105_info sja1110d_info = {
 	.static_ops		= sja1110_table_ops,
 	.dyn_ops		= sja1110_dyn_ops,
 	.regs			= &sja1110_regs,
-	.qinq_tpid		= ETH_P_8021AD,
 	.tag_proto		= DSA_TAG_PROTO_SJA1110,
 	.can_limit_mcast_flood	= true,
 	.multiple_cascade_ports	= true,

include/linux/dsa/sja1105.h

@@ -67,7 +67,6 @@ struct sja1105_port {
 	struct sja1105_tagger_data *data;
 	struct dsa_port *dp;
 	bool hwts_tx_en;
-	u16 xmit_tpid;
 };
 
 enum sja1110_meta_tstamp {

net/dsa/tag_sja1105.c

@@ -133,14 +133,44 @@ static struct sk_buff *sja1105_defer_xmit(struct dsa_port *dp,
 	return NULL;
 }
 
+/* Send VLAN tags with a TPID that blends in with whatever VLAN protocol a
+ * bridge spanning ports of this switch might have.
+ */
 static u16 sja1105_xmit_tpid(struct dsa_port *dp)
 {
-	struct sja1105_port *sp = dp->priv;
+	struct dsa_switch *ds = dp->ds;
+	struct dsa_port *other_dp;
+	u16 proto;
 
-	if (unlikely(!dsa_port_is_sja1105(dp)))
-		return ETH_P_8021Q;
+	/* Since VLAN awareness is global, then if this port is VLAN-unaware,
+	 * all ports are. Use the VLAN-unaware TPID used for tag_8021q.
+	 */
+	if (!dsa_port_is_vlan_filtering(dp))
+		return ETH_P_SJA1105;
+
+	/* Port is VLAN-aware, so there is a bridge somewhere (a single one,
+	 * we're sure about that). It may not be on this port though, so we
+	 * need to find it.
+	 */
+	list_for_each_entry(other_dp, &ds->dst->ports, list) {
+		if (other_dp->ds != ds)
+			continue;
+
+		if (!other_dp->bridge_dev)
+			continue;
+
+		/* Error is returned only if CONFIG_BRIDGE_VLAN_FILTERING,
+		 * which seems pointless to handle, as our port cannot become
+		 * VLAN-aware in that case.
+		 */
+		br_vlan_get_proto(other_dp->bridge_dev, &proto);
+
+		return proto;
+	}
+
+	WARN_ONCE(1, "Port is VLAN-aware but cannot find associated bridge!\n");
 
-	return sp->xmit_tpid;
+	return ETH_P_SJA1105;
 }
 
 static struct sk_buff *sja1105_imprecise_xmit(struct sk_buff *skb,