Merge tag 'imx-cleanup-4.8' of...

Merge tag 'imx-cleanup-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/cleanup

The i.MX cleanup for 4.8:
 - A series from Arnd to clean up cpu_is_mx*() from i.MX platform
 - A series from Andrey to clean up i.MX L2-cache code by using
   core support as much as possible
 - Remove the orphan header eukrea-baseboards.h from i.MX platform
 - Remove boilerplate code from TZIC driver by using IRQCHIP_DECLARE

* tag 'imx-cleanup-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: remove cpu_is_mx*()
  ARM: imx: remove last call to cpu_is_mx5*
  ARM: imx: rework mx27_pm_init() call
  ARM: imx: deconstruct mx3_idle
  ARM: imx: deconstruct mxc_rnga initialization
  ARM: imx: remove cpu_is_mx1 check
  ARM: i.MX: Do not explicitly call l2x0_of_init()
  ARM: i.MX: system.c: Tweak prefetch settings for performance
  ARM: i.MX: system.c: Replace magic numbers
  ARM: i.MX: system.c: Remove redundant errata 752271 code
  ARM: i.MX: system.c: Convert goto to if statement
  ARM: imx: Use IRQCHIP_DECLARE for TZIC
  ARM: imx: Remove orphan header
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-imx/Kconfig

@@ -44,9 +44,6 @@ config MXC_USE_EPIT
 	  uses the same clocks as the GPT. Anyway, on some systems the GPT
 	  may be in use for other purposes.
 
-config ARCH_HAS_RNGA
-	bool
-
 config HAVE_IMX_ANATOP
 	bool
 
@@ -90,7 +87,6 @@ config SOC_IMX27
 config SOC_IMX31
 	bool
 	select CPU_V6
-	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 

arch/arm/mach-imx/Makefile

@@ -8,8 +8,8 @@ obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)

arch/arm/mach-imx/common.h

@@ -32,7 +32,6 @@ void imx27_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
 void mxc_init_irq(void __iomem *);
-void tzic_init_irq(void);
 void mx1_init_irq(void);
 void mx21_init_irq(void);
 void mx27_init_irq(void);
@@ -55,6 +54,7 @@ struct platform_device *mxc_register_gpio(char *name, int id,
 void mxc_set_cpu_type(unsigned int type);
 void mxc_restart(enum reboot_mode, const char *);
 void mxc_arch_reset_init(void __iomem *);
+void imx1_reset_init(void __iomem *);
 void imx_set_aips(void __iomem *);
 void imx_aips_allow_unprivileged_access(const char *compat);
 int mxc_device_init(void);
@@ -67,6 +67,7 @@ void imx_gpc_set_arm_power_in_lpm(bool power_off);
 void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw);
 void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw);
 void imx25_pm_init(void);
+void imx27_pm_init(void);
 
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */

arch/arm/mach-imx/cpu-imx5.c

@@ -60,13 +60,9 @@ static int get_mx51_srev(void)
 /*
  * Returns:
  *	the silicon revision of the cpu
- *	-EINVAL - not a mx51
  */
 int mx51_revision(void)
 {
-	if (!cpu_is_mx51())
-		return -EINVAL;
-
 	if (mx5_cpu_rev == -1)
 		mx5_cpu_rev = get_mx51_srev();
 
@@ -112,13 +108,9 @@ static int get_mx53_srev(void)
 /*
  * Returns:
  *	the silicon revision of the cpu
- *	-EINVAL - not a mx53
  */
 int mx53_revision(void)
 {
-	if (!cpu_is_mx53())
-		return -EINVAL;
-
 	if (mx5_cpu_rev == -1)
 		mx5_cpu_rev = get_mx53_srev();
 

arch/arm/mach-imx/cpu.c

@@ -10,8 +10,6 @@
 #include "common.h"
 
 unsigned int __mxc_cpu_type;
-EXPORT_SYMBOL(__mxc_cpu_type);
-
 static unsigned int imx_soc_revision;
 
 void mxc_set_cpu_type(unsigned int type)

arch/arm/mach-imx/devices/Kconfig

@@ -57,10 +57,6 @@ config IMX_HAVE_PLATFORM_MXC_MMC
 config IMX_HAVE_PLATFORM_MXC_NAND
 	bool
 
-config IMX_HAVE_PLATFORM_MXC_RNGA
-	bool
-	select ARCH_HAS_RNGA
-
 config IMX_HAVE_PLATFORM_MXC_RTC
 	bool
 

arch/arm/mach-imx/devices/platform-mxc_rnga.c

-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-struct imx_mxc_rnga_data {
-	resource_size_t iobase;
-};
-
-#define imx_mxc_rnga_data_entry_single(soc)				\
-	{								\
-		.iobase = soc ## _RNGA_BASE_ADDR,			\
-	}
-
-#ifdef CONFIG_SOC_IMX31
-static const struct imx_mxc_rnga_data imx31_mxc_rnga_data __initconst =
-	imx_mxc_rnga_data_entry_single(MX31);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-static struct platform_device *__init imx_add_mxc_rnga(
-		const struct imx_mxc_rnga_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-	return imx_add_platform_device("mxc_rnga", -1,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
-
-static int __init imxXX_add_mxc_rnga(void)
-{
-	struct platform_device *ret;
-
-#if defined(CONFIG_SOC_IMX31)
-	if (cpu_is_mx31())
-		ret = imx_add_mxc_rnga(&imx31_mxc_rnga_data);
-	else
-#endif /* if defined(CONFIG_SOC_IMX31) */
-		ret = ERR_PTR(-ENODEV);
-
-	return PTR_ERR_OR_ZERO(ret);
-}
-arch_initcall(imxXX_add_mxc_rnga);

arch/arm/mach-imx/eukrea-baseboards.h

-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on board-pcm038.h which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_EUKREA_BASEBOARDS_H__
-#define __MACH_EUKREA_BASEBOARDS_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init()
- *
- * This example here is for the development board. Refer
- * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
- * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
- */
-
-extern void eukrea_mbimxsd25_baseboard_init(void);
-extern void eukrea_mbimxsd35_baseboard_init(void);
-
-#endif
-
-#endif /* __MACH_EUKREA_BASEBOARDS_H__ */

arch/arm/mach-imx/imx27-dt.c

@@ -27,5 +27,6 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.map_io		= mx27_map_io,
 	.init_early	= imx27_init_early,
 	.init_irq	= mx27_init_irq,
+	.init_late	= imx27_pm_init,
 	.dt_compat	= imx27_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/imx31-dt.c

@@ -28,10 +28,22 @@ static void __init imx31_dt_timer_init(void)
 	mx31_clocks_init_dt();
 }
 
+/* FIXME: replace with DT binding */
+static const struct resource imx31_rnga_res[] __initconst = {
+	DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K),
+};
+
+static void __init imx31_dt_mach_init(void)
+{
+	platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res,
+					ARRAY_SIZE(imx31_rnga_res));
+}
+
 DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
 	.map_io		= mx31_map_io,
 	.init_early	= imx31_init_early,
 	.init_irq	= mx31_init_irq,
 	.init_time	= imx31_dt_timer_init,
+	.init_machine	= imx31_dt_mach_init,
 	.dt_compat	= imx31_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/imx35-dt.c

@@ -20,20 +20,16 @@
 #include "common.h"
 #include "mx35.h"
 
-static void __init imx35_irq_init(void)
-{
-	imx_init_l2cache();
-	mx35_init_irq();
-}
-
 static const char * const imx35_dt_board_compat[] __initconst = {
 	"fsl,imx35",
 	NULL
 };
 
 DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.map_io		= mx35_map_io,
 	.init_early	= imx35_init_early,
-	.init_irq	= imx35_irq_init,
+	.init_irq	= mx35_init_irq,
 	.dt_compat	= imx35_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/mach-imx50.c

@@ -22,6 +22,5 @@ static const char * const imx50_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
-	.init_irq	= tzic_init_irq,
 	.dt_compat	= imx50_dt_board_compat,
 MACHINE_END

arch/arm/mach-imx/mach-imx51.c

@@ -69,7 +69,6 @@ static const char * const imx51_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
 	.init_early	= imx51_init_early,
-	.init_irq	= tzic_init_irq,
 	.init_machine	= imx51_dt_init,
 	.init_late	= imx51_init_late,
 	.dt_compat	= imx51_dt_board_compat,

arch/arm/mach-imx/mach-imx53.c

@@ -49,7 +49,6 @@ static const char * const imx53_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.init_early	= imx53_init_early,
-	.init_irq	= tzic_init_irq,
 	.init_machine	= imx53_dt_init,
 	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,

arch/arm/mach-imx/mach-imx6q.c

@@ -407,6 +407,8 @@ static const char * const imx6q_dt_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,

arch/arm/mach-imx/mach-imx6sl.c

@@ -75,6 +75,8 @@ static const char * const imx6sl_dt_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.init_irq	= imx6sl_init_irq,
 	.init_machine	= imx6sl_init_machine,
 	.init_late      = imx6sl_init_late,

arch/arm/mach-imx/mach-imx6sx.c

@@ -103,6 +103,8 @@ static const char * const imx6sx_dt_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
 	.init_irq	= imx6sx_init_irq,
 	.init_machine	= imx6sx_init_machine,
 	.dt_compat	= imx6sx_dt_compat,

arch/arm/mach-imx/mm-imx1.c

@@ -50,7 +50,7 @@ void __init mx1_init_irq(void)
 
 void __init imx1_soc_init(void)
 {
-	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
+	imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
 	mxc_device_init();
 
 	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,

arch/arm/mach-imx/mm-imx27.c

@@ -98,4 +98,6 @@ void __init imx27_soc_init(void)
 	/* imx27 has the imx21 type audmux */
 	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
 					ARRAY_SIZE(imx27_audmux_res));
+
+	imx27_pm_init();
 }

arch/arm/mach-imx/mm-imx3.c

@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/io.h>
 #include <linux/pinctrl/machine.h>
 
 #include <asm/pgtable.h>
@@ -38,8 +39,6 @@ static void imx3_idle(void)
 {
 	unsigned long reg = 0;
 
-	mx3_cpu_lp_set(MX3_WAIT);
-
 	__asm__ __volatile__(
 		/* disable I and D cache */
 		"mrc p15, 0, %0, c1, c0, 0\n"
@@ -135,11 +134,20 @@ void __init mx31_map_io(void)
 	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
+static void imx31_idle(void)
+{
+	int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_LPM_MASK;
+	imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
+
+	imx3_idle();
+}
+
 void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	arch_ioremap_caller = imx3_ioremap_caller;
-	arm_pm_idle = imx3_idle;
+	arm_pm_idle = imx31_idle;
 	mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
 }
 
@@ -167,6 +175,10 @@ static const struct resource imx31_audmux_res[] __initconst = {
 	DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
 };
 
+static const struct resource imx31_rnga_res[] __initconst = {
+	DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K),
+};
+
 void __init imx31_soc_init(void)
 {
 	int to_version = mx31_revision() >> 4;
@@ -195,6 +207,8 @@ void __init imx31_soc_init(void)
 
 	platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
 					ARRAY_SIZE(imx31_audmux_res));
+	platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res,
+					ARRAY_SIZE(imx31_rnga_res));
 }
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
@@ -212,11 +226,21 @@ void __init mx35_map_io(void)
 	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
 }
 
+static void imx35_idle(void)
+{
+	int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR);
+	reg &= ~MXC_CCM_CCMR_LPM_MASK;
+	reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
+	imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
+
+	imx3_idle();
+}
+
 void __init imx35_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	arm_pm_idle = imx3_idle;
+	arm_pm_idle = imx35_idle;
 	arch_ioremap_caller = imx3_ioremap_caller;
 	mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
 }

arch/arm/mach-imx/mxc.h

@@ -45,105 +45,7 @@
 
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
-#endif
-
-#ifdef CONFIG_SOC_IMX1
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX1
-# endif
-# define cpu_is_mx1()		(mxc_cpu_type == MXC_CPU_MX1)
-#else
-# define cpu_is_mx1()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX21
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX21
-# endif
-# define cpu_is_mx21()		(mxc_cpu_type == MXC_CPU_MX21)
-#else
-# define cpu_is_mx21()		(0)
-#endif
 
-#ifdef CONFIG_SOC_IMX25
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX25
-# endif
-# define cpu_is_mx25()		(mxc_cpu_type == MXC_CPU_MX25)
-#else
-# define cpu_is_mx25()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX27
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX27
-# endif
-# define cpu_is_mx27()		(mxc_cpu_type == MXC_CPU_MX27)
-#else
-# define cpu_is_mx27()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX31
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX31
-# endif
-# define cpu_is_mx31()		(mxc_cpu_type == MXC_CPU_MX31)
-#else
-# define cpu_is_mx31()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX35
-# endif
-# define cpu_is_mx35()		(mxc_cpu_type == MXC_CPU_MX35)
-#else
-# define cpu_is_mx35()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX51
-# endif
-# define cpu_is_mx51()		(mxc_cpu_type == MXC_CPU_MX51)
-#else
-# define cpu_is_mx51()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX53
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX53
-# endif
-# define cpu_is_mx53()		(mxc_cpu_type == MXC_CPU_MX53)
-#else
-# define cpu_is_mx53()		(0)
-#endif
-
-#ifndef __ASSEMBLY__
 #ifdef CONFIG_SOC_IMX6SL
 static inline bool cpu_is_imx6sl(void)
 {
@@ -190,9 +92,6 @@ int tzic_enable_wake(void);
 extern struct cpu_op *(*get_cpu_op)(int *op);
 #endif
 
-#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
-#define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
-
 #define imx_readl	readl_relaxed
 #define imx_readw	readw_relaxed
 #define imx_writel	writel_relaxed

arch/arm/mach-imx/pm-imx27.c

@@ -37,13 +37,7 @@ static const struct platform_suspend_ops mx27_suspend_ops = {
 	.valid = suspend_valid_only_mem,
 };
 
-static int __init mx27_pm_init(void)
+void __init imx27_pm_init(void)
 {
-	if (!cpu_is_mx27())
-		return 0;
-
 	suspend_set_ops(&mx27_suspend_ops);
-	return 0;
 }
-
-device_initcall(mx27_pm_init);

arch/arm/mach-imx/pm-imx3.c

-/*
- *  Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/io.h>
-
-#include "common.h"
-#include "crmregs-imx3.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-
-/*
- * Set cpu low power mode before WFI instruction. This function is called
- * mx3 because it can be used for mx31 and mx35.
- * Currently only WAIT_MODE is supported.
- */
-void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
-{
-	int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_LPM_MASK;
-
-	switch (mode) {
-	case MX3_WAIT:
-		if (cpu_is_mx35())
-			reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
-		imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
-		break;
-	default:
-		pr_err("Unknown cpu power mode: %d\n", mode);
-		return;
-	}
-}

arch/arm/mach-imx/system.c

@@ -34,25 +34,19 @@
 
 static void __iomem *wdog_base;
 static struct clk *wdog_clk;
+static int wcr_enable = (1 << 2);
 
 /*
  * Reset the system. It is called by machine_restart().
  */
 void mxc_restart(enum reboot_mode mode, const char *cmd)
 {
-	unsigned int wcr_enable;
-
 	if (!wdog_base)
 		goto reset_fallback;
 
 	if (!IS_ERR(wdog_clk))
 		clk_enable(wdog_clk);
 
-	if (cpu_is_mx1())
-		wcr_enable = (1 << 0);
-	else
-		wcr_enable = (1 << 2);
-
 	/* Assert SRS signal */
 	imx_writew(wcr_enable, wdog_base);
 	/*
@@ -89,6 +83,14 @@ void __init mxc_arch_reset_init(void __iomem *base)
 		clk_prepare(wdog_clk);
 }
 
+#ifdef CONFIG_SOC_IMX1
+void __init imx1_reset_init(void __iomem *base)
+{
+	wcr_enable = (1 << 0);
+	mxc_arch_reset_init(base);
+}
+#endif
+
 #ifdef CONFIG_CACHE_L2X0
 void __init imx_init_l2cache(void)
 {
@@ -98,38 +100,28 @@ void __init imx_init_l2cache(void)
 
 	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
 	if (!np)
-		goto out;
+		return;
 
 	l2x0_base = of_iomap(np, 0);
-	if (!l2x0_base) {
-		of_node_put(np);
-		goto out;
-	}
-
-	if (readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)
-		goto skip_if_enabled;
+	if (!l2x0_base)
+		goto put_node;
 
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
 		/* Configure the L2 PREFETCH and POWER registers */
 		val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
-	val |= 0x70800000;
-	/*
-	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
-	 * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
-	 * But according to ARM PL310 errata: 752271
-	 * ID: 752271: Double linefill feature can cause data corruption
-	 * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
-	 * Workaround: The only workaround to this erratum is to disable the
-	 * double linefill feature. This is the default behavior.
-	 */
-	if (cpu_is_imx6q())
-		val &= ~(1 << 30 | 1 << 23);
+		val |= L310_PREFETCH_CTRL_DBL_LINEFILL |
+			L310_PREFETCH_CTRL_INSTR_PREFETCH |
+			L310_PREFETCH_CTRL_DATA_PREFETCH;
+
+		/* Set perfetch offset to improve performance */
+		val &= ~L310_PREFETCH_CTRL_OFFSET_MASK;
+		val |= 15;
+
 		writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
+	}
 
-skip_if_enabled:
 	iounmap(l2x0_base);
+put_node:
 	of_node_put(np);
-
-out:
-	l2x0_of_init(0, ~0);
 }
 #endif

arch/arm/mach-imx/tzic.c

@@ -9,12 +9,11 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include <linux/module.h>
-#include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/io.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -153,13 +152,11 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init tzic_init_irq(void)
+static int __init tzic_init_dt(struct device_node *np, struct device_node *p)
 {
-	struct device_node *np;
 	int irq_base;
 	int i;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
 	tzic_base = of_iomap(np, 0);
 	WARN_ON(!tzic_base);
 
@@ -199,7 +196,10 @@ void __init tzic_init_irq(void)
 #endif
 
 	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
+
+	return 0;
 }
+IRQCHIP_DECLARE(tzic, "fsl,tzic", tzic_init_dt);
 
 /**
  * tzic_enable_wake() - enable wakeup interrupt