IB/qib: Fix over-scheduling of QSFP work

Don't over-schedule QSFP work on driver initialization.  It could end
up being run simultaneously on two different CPUs resulting in bad
EEPROM reads.  In combination with setting the physical IB link state
prior to the IBC being brought out of reset, this can cause the link
state machine to start training early with wrong settings.
Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

drivers/infiniband/hw/qib/qib_iba7322.c

@@ -2307,19 +2307,11 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd)
 		SYM_LSB(IBCCtrlA_0, MaxPktLen);
 	ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */
 
-	/* initially come up waiting for TS1, without sending anything. */
-	val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
-		QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
-
-	ppd->cpspec->ibcctrl_a = val;
 	/*
 	 * Reset the PCS interface to the serdes (and also ibc, which is still
 	 * in reset from above).  Writes new value of ibcctrl_a as last step.
 	 */
 	qib_7322_mini_pcs_reset(ppd);
-	qib_write_kreg(dd, kr_scratch, 0ULL);
-	/* clear the linkinit cmds */
-	ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, LinkInitCmd);
 
 	if (!ppd->cpspec->ibcctrl_b) {
 		unsigned lse = ppd->link_speed_enabled;
@@ -2385,6 +2377,14 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd)
 	ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn);
 	set_vls(ppd);
 
+	/* initially come up DISABLED, without sending anything. */
+	val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
+					QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
+	qib_write_kreg_port(ppd, krp_ibcctrl_a, val);
+	qib_write_kreg(dd, kr_scratch, 0ULL);
+	/* clear the linkinit cmds */
+	ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd);
+
 	/* be paranoid against later code motion, etc. */
 	spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
 	ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable);

drivers/infiniband/hw/qib/qib_qsfp.c

@@ -480,18 +480,6 @@ void qib_qsfp_init(struct qib_qsfp_data *qd,
 	udelay(20); /* Generous RST dwell */
 
 	dd->f_gpio_mod(dd, mask, mask, mask);
-	/* Spec says module can take up to two seconds! */
-	mask = QSFP_GPIO_MOD_PRS_N;
-	if (qd->ppd->hw_pidx)
-		mask <<= QSFP_GPIO_PORT2_SHIFT;
-
-	/* Do not try to wait here. Better to let event handle it */
-	if (!qib_qsfp_mod_present(qd->ppd))
-		goto bail;
-	/* We see a module, but it may be unwise to look yet. Just schedule */
-	qd->t_insert = get_jiffies_64();
-	queue_work(ib_wq, &qd->work);
-bail:
 	return;
 }