Commit 8f0991cc authored by Jani Nikula's avatar Jani Nikula

drm/i915/dsi: disassociate VBT video transfer mode from register values

The VBT DSI video transfer mode field values have been defined in terms
of the VLV MIPI_VIDEO_MODE_FORMAT register. The ICL DSI code maps that
to ICL DSI_TRANS_FUNC_CONF() register. The values are the same, though
the shift is different.

Make a clean break and disassociate the values from each other. Assume
the values can be different, and translate the VBT value to VLV and ICL
register values as needed. Use the existing macros from intel_bios.h.

This will be useful in splitting the DSI register macros to files by DSI
implementation.

Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217224023.3994777-1-jani.nikula@intel.com
parent e62f25e8
......@@ -788,14 +788,14 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
/* program DSI operation mode */
if (is_vid_mode(intel_dsi)) {
tmp &= ~OP_MODE_MASK;
switch (intel_dsi->video_mode_format) {
switch (intel_dsi->video_mode) {
default:
MISSING_CASE(intel_dsi->video_mode_format);
MISSING_CASE(intel_dsi->video_mode);
fallthrough;
case VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS:
case NON_BURST_SYNC_EVENTS:
tmp |= VIDEO_MODE_SYNC_EVENT;
break;
case VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE:
case NON_BURST_SYNC_PULSE:
tmp |= VIDEO_MODE_SYNC_PULSE;
break;
}
......@@ -960,8 +960,7 @@ gen11_dsi_set_transcoder_timings(struct intel_encoder *encoder,
/* TRANS_HSYNC register to be programmed only for video mode */
if (is_vid_mode(intel_dsi)) {
if (intel_dsi->video_mode_format ==
VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE) {
if (intel_dsi->video_mode == NON_BURST_SYNC_PULSE) {
/* BSPEC: hsync size should be atleast 16 pixels */
if (hsync_size < 16)
drm_err(&dev_priv->drm,
......
......@@ -79,8 +79,8 @@ struct intel_dsi {
*/
enum mipi_dsi_pixel_format pixel_format;
/* video mode format for MIPI_VIDEO_MODE_FORMAT register */
u32 video_mode_format;
/* NON_BURST_SYNC_PULSE, NON_BURST_SYNC_EVENTS, or BURST_MODE */
int video_mode;
/* eot for MIPI_EOT_DISABLE register */
u8 eotp_pkt;
......
......@@ -675,11 +675,11 @@ void intel_dsi_log_params(struct intel_dsi *intel_dsi)
drm_dbg_kms(&i915->drm, "Lane count %d\n", intel_dsi->lane_count);
drm_dbg_kms(&i915->drm, "DPHY param reg 0x%x\n", intel_dsi->dphy_reg);
drm_dbg_kms(&i915->drm, "Video mode format %s\n",
intel_dsi->video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE ?
intel_dsi->video_mode == NON_BURST_SYNC_PULSE ?
"non-burst with sync pulse" :
intel_dsi->video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS ?
intel_dsi->video_mode == NON_BURST_SYNC_EVENTS ?
"non-burst with sync events" :
intel_dsi->video_mode_format == VIDEO_MODE_BURST ?
intel_dsi->video_mode == BURST_MODE ?
"burst" : "<unknown>");
drm_dbg_kms(&i915->drm, "Burst mode ratio %d\n",
intel_dsi->burst_mode_ratio);
......@@ -739,7 +739,7 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
intel_dsi->dual_link = mipi_config->dual_link;
intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
intel_dsi->operation_mode = mipi_config->is_cmd_mode;
intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
intel_dsi->video_mode = mipi_config->video_transfer_mode;
intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
intel_dsi->hs_tx_timeout = mipi_config->hs_tx_timeout;
......@@ -770,7 +770,7 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
* Target ddr frequency from VBT / non burst ddr freq
* multiply by 100 to preserve remainder
*/
if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
if (intel_dsi->video_mode == BURST_MODE) {
if (mipi_config->target_burst_mode_freq) {
u32 bitrate = intel_dsi_bitrate(intel_dsi);
......
......@@ -1492,7 +1492,7 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
*/
if (is_vid_mode(intel_dsi) &&
intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
intel_dsi->video_mode == BURST_MODE) {
intel_de_write(dev_priv, MIPI_HS_TX_TIMEOUT(port),
txbyteclkhs(adjusted_mode->crtc_htotal, bpp, intel_dsi->lane_count, intel_dsi->burst_mode_ratio) + 1);
} else {
......@@ -1568,12 +1568,33 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
intel_de_write(dev_priv, MIPI_CLK_LANE_SWITCH_TIME_CNT(port),
intel_dsi->clk_lp_to_hs_count << LP_HS_SSW_CNT_SHIFT | intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT);
if (is_vid_mode(intel_dsi))
/* Some panels might have resolution which is not a
if (is_vid_mode(intel_dsi)) {
u32 fmt = intel_dsi->video_frmt_cfg_bits | IP_TG_CONFIG;
/*
* Some panels might have resolution which is not a
* multiple of 64 like 1366 x 768. Enable RANDOM
* resolution support for such panels by default */
intel_de_write(dev_priv, MIPI_VIDEO_MODE_FORMAT(port),
intel_dsi->video_frmt_cfg_bits | intel_dsi->video_mode_format | IP_TG_CONFIG | RANDOM_DPI_DISPLAY_RESOLUTION);
* resolution support for such panels by default.
*/
fmt |= RANDOM_DPI_DISPLAY_RESOLUTION;
switch (intel_dsi->video_mode) {
default:
MISSING_CASE(intel_dsi->video_mode);
fallthrough;
case NON_BURST_SYNC_EVENTS:
fmt |= VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS;
break;
case NON_BURST_SYNC_PULSE:
fmt |= VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE;
break;
case BURST_MODE:
fmt |= VIDEO_MODE_BURST;
break;
}
intel_de_write(dev_priv, MIPI_VIDEO_MODE_FORMAT(port), fmt);
}
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment