Commit 8f4c8bd9 authored by Stefan Agner's avatar Stefan Agner Committed by Shawn Guo

ARM: dts: imx7-colibri: allow to disable Ethernet rail

The regulator-always-on property on the Ethernet rail prevents Linux
from disabling the rail when Ethernet is shut down (suspend or simply
link down). With this change the regulator framework will disable the
rail when the Ethernet PHY is not used, saving power especially on
carrier board not using Ethernet.
Signed-off-by: default avatarStefan Agner <stefan@agner.ch>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 55dfc902
...@@ -181,7 +181,7 @@ reg_DCDC4: DCDC4 { /* V1.35_DRAM */ ...@@ -181,7 +181,7 @@ reg_DCDC4: DCDC4 { /* V1.35_DRAM */
reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */ reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
regulator-always-on; regulator-boot-on;
}; };
reg_LDO2: LDO2 { /* +V1.8_SD */ reg_LDO2: LDO2 { /* +V1.8_SD */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment