Skip to content

L
linux
Commit 8f574b35 authored by Jie Yang's avatar Jie Yang Committed by David S. Miller
Browse files
Options

atl1c: Add AR8151 v2 support and change L0s/L1 routine 

Add AR8151 v2.0 Gigabit 1000 support
Change jumbo frame size to 6K
Update L0s/L1 rountine
        when link speed is 100M or 1G, set L1 link timer to 4 for l1d_2 and l2c_b2
        set L1 link timer to 7 for l2c_b, set L1 link timer to 0xF for others.
Update atl1c_suspend routine
	just refactory the function, add atl1c_phy_power_saving routine,
	when Wake On Lan enable, this func will be called to save power,
	it will reautoneg PHY to 10/100M speed depend on the link
	partners link capability.
Update atl1c_configure_des_ring
        do not use l2c_b default SRAM configuration.
Signed-off-by: default avatarJie Yang <Jie.Yang@atheros.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent aac4dddc
Expand all Show whitespace changes
Inline Side-by-side
Showing with 345 additions and 168 deletions
drivers/net/atl1c/atl1c.h
View file @ 8f574b35
......@@ -73,7 +73,8 @@
#define FULL_DUPLEX 2
#define AT_RX_BUF_SIZE (ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)
#define MAX_JUMBO_FRAME_SIZE (9*1024)
#define MAX_JUMBO_FRAME_SIZE (6*1024)
#define MAX_TSO_FRAME_SIZE (7*1024)
#define MAX_TX_OFFLOAD_THRESH (9*1024)
#define AT_MAX_RECEIVE_QUEUE 4
......@@ -87,10 +88,11 @@
#define AT_MAX_INT_WORK 5
#define AT_TWSI_EEPROM_TIMEOUT 100
#define AT_HW_MAX_IDLE_DELAY 10
#define AT_SUSPEND_LINK_TIMEOUT 28
#define AT_SUSPEND_LINK_TIMEOUT 100
#define AT_ASPM_L0S_TIMER 6
#define AT_ASPM_L1_TIMER 12
#define AT_LCKDET_TIMER 12
#define ATL1C_PCIE_L0S_L1_DISABLE 0x01
#define ATL1C_PCIE_PHY_RESET 0x02
......@@ -316,6 +318,7 @@ enum atl1c_nic_type {
athr_l2c_b,
athr_l2c_b2,
athr_l1d,
athr_l1d_2,
};
enum atl1c_trans_queue {
......@@ -392,6 +395,8 @@ struct atl1c_hw {
u16 subsystem_id;
u16 subsystem_vendor_id;
u8 revision_id;
u16 phy_id1;
u16 phy_id2;
u32 intr_mask;
u8 dmaw_dly_cnt;
......
drivers/net/atl1c/atl1c_hw.c
View file @ 8f574b35
......@@ -37,6 +37,9 @@ int atl1c_check_eeprom_exist(struct atl1c_hw *hw)
if (data & TWSI_DEBUG_DEV_EXIST)
return 1;
AT_READ_REG(hw, REG_MASTER_CTRL, &data);
if (data & MASTER_CTRL_OTP_SEL)
return 1;
return 0;
}
......@@ -69,6 +72,8 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw)
u32 i;
u32 otp_ctrl_data;
u32 twsi_ctrl_data;
u32 ltssm_ctrl_data;
u32 wol_data;
u8 eth_addr[ETH_ALEN];
u16 phy_data;
bool raise_vol = false;
......@@ -104,6 +109,15 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw)
udelay(20);
raise_vol = true;
}
/* close open bit of ReadOnly*/
AT_READ_REG(hw, REG_LTSSM_ID_CTRL, &ltssm_ctrl_data);
ltssm_ctrl_data &= ~LTSSM_ID_EN_WRO;
AT_WRITE_REG(hw, REG_LTSSM_ID_CTRL, ltssm_ctrl_data);
/* clear any WOL settings */
AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
AT_READ_REG(hw, REG_WOL_CTRL, &wol_data);
AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data);
twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART;
......@@ -119,17 +133,15 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw)
}
/* Disable OTP_CLK */
if ((hw->nic_type == athr_l1c || hw->nic_type == athr_l2c)) {
if (otp_ctrl_data & OTP_CTRL_CLK_EN) {
otp_ctrl_data &= ~OTP_CTRL_CLK_EN;
AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
AT_WRITE_FLUSH(hw);
msleep(1);
}
}
if (raise_vol) {
if (hw->nic_type == athr_l2c_b ||
hw->nic_type == athr_l2c_b2 ||
hw->nic_type == athr_l1d) {
hw->nic_type == athr_l1d ||
hw->nic_type == athr_l1d_2) {
atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x00);
if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data))
goto out;
......@@ -456,14 +468,22 @@ int atl1c_phy_reset(struct atl1c_hw *hw)
if (hw->nic_type == athr_l2c_b ||
hw->nic_type == athr_l2c_b2 ||
hw->nic_type == athr_l1d) {
hw->nic_type == athr_l1d ||
hw->nic_type == athr_l1d_2) {
atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B);
atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data);
atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xFFF7);
msleep(20);
}
/*Enable PHY LinkChange Interrupt */
if (hw->nic_type == athr_l1d) {
atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);
atl1c_write_phy_reg(hw, MII_DBG_DATA, 0x929D);
}
if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b2
|| hw->nic_type == athr_l2c || hw->nic_type == athr_l2c) {
atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29);
atl1c_write_phy_reg(hw, MII_DBG_DATA, 0xB6DD);
}
err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data);
if (err) {
if (netif_msg_hw(adapter))
......@@ -482,11 +502,9 @@ int atl1c_phy_init(struct atl1c_hw *hw)
struct pci_dev *pdev = adapter->pdev;
int ret_val;
u16 mii_bmcr_data = BMCR_RESET;
u16 phy_id1, phy_id2;
if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &phy_id1) != 0) ||
(atl1c_read_phy_reg(hw, MII_PHYSID2, &phy_id2) != 0)) {
if (netif_msg_link(adapter))
if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &hw->phy_id1) != 0) ||
(atl1c_read_phy_reg(hw, MII_PHYSID2, &hw->phy_id2) != 0)) {
dev_err(&pdev->dev, "Error get phy ID\n");
return -1;
}
......@@ -572,6 +590,65 @@ int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex)
return 0;
}
int atl1c_phy_power_saving(struct atl1c_hw *hw)
{
struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
struct pci_dev *pdev = adapter->pdev;
int ret = 0;
u16 autoneg_advertised = ADVERTISED_10baseT_Half;
u16 save_autoneg_advertised;
u16 phy_data;
u16 mii_lpa_data;
u16 speed = SPEED_0;
u16 duplex = FULL_DUPLEX;
int i;
atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
if (phy_data & BMSR_LSTATUS) {
atl1c_read_phy_reg(hw, MII_LPA, &mii_lpa_data);
if (mii_lpa_data & LPA_10FULL)
autoneg_advertised = ADVERTISED_10baseT_Full;
else if (mii_lpa_data & LPA_10HALF)
autoneg_advertised = ADVERTISED_10baseT_Half;
else if (mii_lpa_data & LPA_100HALF)
autoneg_advertised = ADVERTISED_100baseT_Half;
else if (mii_lpa_data & LPA_100FULL)
autoneg_advertised = ADVERTISED_100baseT_Full;
save_autoneg_advertised = hw->autoneg_advertised;
hw->phy_configured = false;
hw->autoneg_advertised = autoneg_advertised;
if (atl1c_restart_autoneg(hw) != 0) {
dev_dbg(&pdev->dev, "phy autoneg failed\n");
ret = -1;
}
hw->autoneg_advertised = save_autoneg_advertised;
if (mii_lpa_data) {
for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) {
mdelay(100);
atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
if (phy_data & BMSR_LSTATUS) {
if (atl1c_get_speed_and_duplex(hw, &speed,
&duplex) != 0)
dev_dbg(&pdev->dev,
"get speed and duplex failed\n");
break;
}
}
}
} else {
speed = SPEED_10;
duplex = HALF_DUPLEX;
}
adapter->link_speed = speed;
adapter->link_duplex = duplex;
return ret;
}
int atl1c_restart_autoneg(struct atl1c_hw *hw)
{
int err = 0;
......
drivers/net/atl1c/atl1c_hw.h
View file @ 8f574b35
......@@ -42,7 +42,7 @@ bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value);
int atl1c_phy_init(struct atl1c_hw *hw);
int atl1c_check_eeprom_exist(struct atl1c_hw *hw);
int atl1c_restart_autoneg(struct atl1c_hw *hw);
int atl1c_phy_power_saving(struct atl1c_hw *hw);
/* register definition */
#define REG_DEVICE_CAP 0x5C
#define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7
......@@ -120,6 +120,12 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw);
#define REG_PCIE_PHYMISC 0x1000
#define PCIE_PHYMISC_FORCE_RCV_DET 0x4
#define REG_PCIE_PHYMISC2 0x1004
#define PCIE_PHYMISC2_SERDES_CDR_MASK 0x3
#define PCIE_PHYMISC2_SERDES_CDR_SHIFT 16
#define PCIE_PHYMISC2_SERDES_TH_MASK 0x3
#define PCIE_PHYMISC2_SERDES_TH_SHIFT 18
#define REG_TWSI_DEBUG 0x1108
#define TWSI_DEBUG_DEV_EXIST 0x20000000
......@@ -150,24 +156,28 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw);
#define PM_CTRL_ASPM_L0S_EN 0x00001000
#define PM_CTRL_CLK_SWH_L1 0x00002000
#define PM_CTRL_CLK_PWM_VER1_1 0x00004000
#define PM_CTRL_PCIE_RECV 0x00008000
#define PM_CTRL_RCVR_WT_TIMER 0x00008000
#define PM_CTRL_L1_ENTRY_TIMER_MASK 0xF
#define PM_CTRL_L1_ENTRY_TIMER_SHIFT 16
#define PM_CTRL_PM_REQ_TIMER_MASK 0xF
#define PM_CTRL_PM_REQ_TIMER_SHIFT 20
#define PM_CTRL_LCKDET_TIMER_MASK 0x3F
#define PM_CTRL_LCKDET_TIMER_MASK 0xF
#define PM_CTRL_LCKDET_TIMER_SHIFT 24
#define PM_CTRL_EN_BUFS_RX_L0S 0x10000000
#define PM_CTRL_SA_DLY_EN 0x20000000
#define PM_CTRL_MAC_ASPM_CHK 0x40000000
#define PM_CTRL_HOTRST 0x80000000
#define REG_LTSSM_ID_CTRL 0x12FC
#define LTSSM_ID_EN_WRO 0x1000
/* Selene Master Control Register */
#define REG_MASTER_CTRL 0x1400
#define MASTER_CTRL_SOFT_RST 0x1
#define MASTER_CTRL_TEST_MODE_MASK 0x3
#define MASTER_CTRL_TEST_MODE_SHIFT 2
#define MASTER_CTRL_BERT_START 0x10
#define MASTER_CTRL_OOB_DIS_OFF 0x40
#define MASTER_CTRL_SA_TIMER_EN 0x80
#define MASTER_CTRL_MTIMER_EN 0x100
#define MASTER_CTRL_MANUAL_INT 0x200
#define MASTER_CTRL_TX_ITIMER_EN 0x400
......@@ -220,6 +230,12 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw);
GPHY_CTRL_PWDOWN_HW |\
GPHY_CTRL_PHY_IDDQ)
#define GPHY_CTRL_POWER_SAVING ( \
GPHY_CTRL_SEL_ANA_RST |\
GPHY_CTRL_HIB_EN |\
GPHY_CTRL_HIB_PULSE |\
GPHY_CTRL_PWDOWN_HW |\
GPHY_CTRL_PHY_IDDQ)
/* Block IDLE Status Register */
#define REG_IDLE_STATUS 0x1410
#define IDLE_STATUS_MASK 0x00FF
......@@ -287,6 +303,14 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw);
#define SERDES_LOCK_DETECT 0x1 /* SerDes lock detected. This signal
* comes from Analog SerDes */
#define SERDES_LOCK_DETECT_EN 0x2 /* 1: Enable SerDes Lock detect function */
#define SERDES_LOCK_STS_SELFB_PLL_SHIFT 0xE
#define SERDES_LOCK_STS_SELFB_PLL_MASK 0x3
#define SERDES_OVCLK_18_25 0x0
#define SERDES_OVCLK_12_18 0x1
#define SERDES_OVCLK_0_4 0x2
#define SERDES_OVCLK_4_12 0x3
#define SERDES_MAC_CLK_SLOWDOWN 0x20000
#define SERDES_PYH_CLK_SLOWDOWN 0x40000
/* MAC Control Register */
#define REG_MAC_CTRL 0x1480
......@@ -693,6 +717,21 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw);
#define REG_MAC_TX_STATUS_BIN 0x1760
#define REG_MAC_TX_STATUS_END 0x17c0
#define REG_CLK_GATING_CTRL 0x1814
#define CLK_GATING_DMAW_EN 0x0001
#define CLK_GATING_DMAR_EN 0x0002
#define CLK_GATING_TXQ_EN 0x0004
#define CLK_GATING_RXQ_EN 0x0008
#define CLK_GATING_TXMAC_EN 0x0010
#define CLK_GATING_RXMAC_EN 0x0020
#define CLK_GATING_EN_ALL (CLK_GATING_DMAW_EN |\
CLK_GATING_DMAR_EN |\
CLK_GATING_TXQ_EN |\
CLK_GATING_RXQ_EN |\
CLK_GATING_TXMAC_EN|\
CLK_GATING_RXMAC_EN)
/* DEBUG ADDR */
#define REG_DEBUG_DATA0 0x1900
#define REG_DEBUG_DATA1 0x1904
......@@ -734,6 +773,10 @@ int atl1c_restart_autoneg(struct atl1c_hw *hw);
#define MII_PHYSID1 0x02
#define MII_PHYSID2 0x03
#define L1D_MPW_PHYID1 0xD01C /* V7 */
#define L1D_MPW_PHYID2 0xD01D /* V1-V6 */
#define L1D_MPW_PHYID3 0xD01E /* V8 */
/* Autoneg Advertisement Register */
#define MII_ADVERTISE 0x04
......
drivers/net/atl1c/atl1c_main.c
View file @ 8f574b35
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7