ALSA: usb-audio: Add support for Creative BT-D1 via usb sound quirks

Support the Creative BT-D1 Bluetooth USB audio device. Before this
patch, Linux had trouble finding the correct USB descriptors and bailed
out with these messages:

 no or invalid class specific endpoint descriptor

Now it still prints these messages on hotplug:

 snd-usb-audio: probe of ...:1.0 failed with error -5
 snd-usb-audio: probe of ...:1.2 failed with error -5
 snd-usb-audio: probe of ...:1.3 failed with error -5

But the device works correctly, including the HID support.

The patch is diff'ed against 3.8-rc1 but should apply to older kernels
as well.
Signed-off-by: Alexander Schremmer <alex@alexanderweb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/usb/quirks-table.h

@@ -50,6 +50,28 @@
 	}
 },
 
+{
+	/* Creative BT-D1 */
+	USB_DEVICE(0x041e, 0x0005),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = 1,
+		.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+		.data = &(const struct audioformat) {
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.channels = 2,
+			.iface = 1,
+			.altsetting = 1,
+			.altset_idx = 1,
+			.endpoint = 0x03,
+			.ep_attr = USB_ENDPOINT_XFER_ISOC,
+			.attributes = 0,
+			.rates = SNDRV_PCM_RATE_CONTINUOUS,
+			.rate_min = 48000,
+			.rate_max = 48000,
+		}
+	}
+},
+
 /* Creative/Toshiba Multimedia Center SB-0500 */
 {
 	USB_DEVICE(0x041e, 0x3048),