Skip to content

L
linux
Commit 900007f2 authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: msm8998-yoshino: Use SONY GPIO names 

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the Yoshino devices DTs to better document the hardware.

Lilac and Poplar have identical pin assignments.
Diff between these two and maple:

TLMM:
-  "NC",
+  "TS_VDDIO_EN",

PMI8998:
-  "NC"
+  "USB_SWITCH_SEL"

-  "NC"
+  "4K_DISP_DCDC_EN"

PM8005:
-  "NC"
+  "EAR_EN"

Which is probably due to Maple being designed and released quite a bit
earlier than the other two and it having a super high tech true-4K
display.
Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314-topic-yoshino_gpio-v2-1-4cb80e187e38@linaro.org
parent d20ad168
Hide whitespace changes
Inline Side-by-side
Showing with 374 additions and 0 deletions
arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
View file @ 900007f2
...@@ -37,7 +37,29 @@ &lab { ...@@ -37,7 +37,29 @@ &lab {
qcom,soft-start-us = <200>; qcom,soft-start-us = <200>;
}; };
&pm8005_gpios {
gpio-line-names = "EAR_EN", /* GPIO_1 */
"NC",
"SLB",
"OPTION_1_PM8005";
};
&pmi8998_gpios { &pmi8998_gpios {
gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
"NC",
"NC",
"TYPEC_UUSB_SEL",
"VIB_LDO_EN",
"NC",
"DISPLAY_TYPE_SEL",
"USB_SWITCH_SEL",
"NC",
"4K_DISP_DCDC_EN", /* GPIO_10 */
"NC",
"DIV_CLK3",
"SPMI_I2C_SEL",
"NC";
disp_dvdd_en: disp-dvdd-en-active-state { disp_dvdd_en: disp-dvdd-en-active-state {
pins = "gpio10"; pins = "gpio10";
function = "normal"; function = "normal";
...@@ -49,6 +71,159 @@ disp_dvdd_en: disp-dvdd-en-active-state { ...@@ -49,6 +71,159 @@ disp_dvdd_en: disp-dvdd-en-active-state {
}; };
}; };
&tlmm {
gpio-line-names = "", /* GPIO_0 */
"",
"",
"",
"DEBUG_UART_TX",
"DEBUG_UART_RX",
"CAMSENSOR_I2C_SDA",
"CAMSENSOR_I2C_SCL",
"NC",
"NC",
"MDP_VSYNC_P", /* GPIO_10 */
"RGBC_IR_INT",
"NFC_VEN",
"CAM_MCLK0",
"CAM_MCLK1",
"NC",
"NC",
"CCI_I2C_SDA0",
"CCI_I2C_SCL0",
"CCI_I2C_SDA1",
"CCI_I2C_SCL1", /* GPIO_20 */
"MAIN_CAM_PWR_EN",
"TOF_INT_N",
"NC",
"NC",
"CHAT_CAM_PWR_EN",
"NC",
"TOF_RESET_N",
"CAM2_RSTN",
"NC",
"CAM1_RSTN", /* GPIO_30 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"CC_DIR",
"UIM2_DETECT_EN",
"FP_RESET_N", /* GPIO_40 */
"NC",
"NC",
"NC",
"NC",
"BT_HCI_UART_TXD",
"BT_HCI_UART_RXD",
"BT_HCI_UART_CTS_N",
"BT_HCI_UART_RFR_N",
"NC",
"NC", /* GPIO_50 */
"NC",
"NC",
"CODEC_INT2_N",
"CODEC_INT1_N",
"APPS_I2C_SDA",
"APPS_I2C_SCL",
"FORCED_USB_BOOT",
"NC",
"NC",
"NC", /* GPIO_60 */
"NC",
"NC",
"TRAY2_DET_DS",
"CODEC_RST_N",
"WSA_L_EN",
"WSA_R_EN",
"NC",
"NC",
"NC",
"LPASS_SLIMBUS_CLK", /* GPIO_70 */
"LPASS_SLIMBUS_DATA0",
"LPASS_SLIMBUS_DATA1",
"BT_FM_SLIMBUS_DATA",
"BT_FM_SLIMBUS_CLK",
"NC",
"RF_LCD_ID_EN",
"NC",
"NC",
"NC",
"NC", /* GPIO_80 */
"SW_SERVICE",
"TX_GTR_THRES_IN",
"HW_ID0",
"HW_ID1",
"NC",
"NC",
"TS_I2C_SDA",
"TS_I2C_SCL",
"TS_RESET_N",
"NC", /* GPIO_90 */
"NC",
"NFC_IRQ",
"NFC_DWLD_EN",
"DISP_RESET_N",
"TRAY2_DET",
"CAM_SOF",
"RFFE6_CLK",
"RFFE6_DATA",
"DEBUG_GPIO0",
"DEBUG_GPIO1", /* GPIO_100 */
"GRFC4",
"NC",
"NC",
"RSVD",
"UIM2_DATA",
"UIM2_CLK",
"UIM2_RESET",
"UIM2_PRESENT",
"UIM1_DATA",
"UIM1_CLK", /* GPIO_110 */
"UIM1_RST",
"UIM1_PRESENT",
"UIM_BATT_ALARM",
"RSVD",
"NC",
"NC",
"ACCEL_INT",
"GYRO_INT",
"COMPASS_INT",
"ALS_PROX_INT_N", /* GPIO_120 */
"FP_INT_N",
"NC",
"BAROMETER_INT",
"ACC_COVER_OPEN",
"TS_INT_N",
"NC",
"NC",
"USB_DETECT_EN",
"NC",
"QLINK_REQUEST", /* GPIO_130 */
"QLINK_ENABLE",
"NC",
"TS_VDDIO_EN",
"WMSS_RESET_N",
"PA_INDICATOR_OR",
"NC",
"RFFE3_DATA",
"RFFE3_CLK",
"RFFE4_DATA",
"RFFE4_CLK", /* GPIO_140 */
"RFFE5_DATA",
"RFFE5_CLK",
"GNSS_EN",
"MSS_LTE_COXM_TXD",
"MSS_LTE_COXM_RXD",
"RFFE2_DATA",
"RFFE2_CLK",
"RFFE1_DATA",
"RFFE1_CLK";
};
&vreg_l22a_2p85 { &vreg_l22a_2p85 {
regulator-min-microvolt = <2704000>; regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2704000>; regulator-max-microvolt = <2704000>;
......
arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
View file @ 900007f2
...@@ -292,6 +292,13 @@ &lab { ...@@ -292,6 +292,13 @@ &lab {
regulator-soft-start; regulator-soft-start;
}; };
&pm8005_gpios {
gpio-line-names = "NC", /* GPIO_1 */
"NC",
"SLB",
"OPTION_1_PM8005";
};
&pm8005_regulators { &pm8005_regulators {
/* VDD_GFX supply */ /* VDD_GFX supply */
pm8005_s1: s1 { pm8005_s1: s1 {
...@@ -304,6 +311,33 @@ pm8005_s1: s1 { ...@@ -304,6 +311,33 @@ pm8005_s1: s1 {
}; };
&pm8998_gpios { &pm8998_gpios {
gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */
"NC",
"WLAN_SW_CTRL (DISALLOWED)",
"SSC_PWR_EN",
"VOL_DOWN_N",
"VOL_UP_N",
"SNAPSHOT_N",
"FOCUS_N",
"FLASH_THERM",
"", /* GPIO_10 */
"",
"",
"DIV_CLK1",
"NC",
"NC (DISALLOWED)",
"DIV_CLK3",
"NC",
"NC",
"NC",
"NC (DISALLOWED)", /* GPIO_20 */
"NFC_CLK_REQ",
"NC (DISALLOWED)",
"WCSS_PWR_REQ",
"OPTION_1 (DISALLOWED)",
"OPTION_2 (DISALLOWED)",
"PM_SLB (DISALLOWED)";
vol_down_pin_a: vol-down-active-state { vol_down_pin_a: vol-down-active-state {
pins = "gpio5"; pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL; function = PMIC_GPIO_FUNC_NORMAL;
...@@ -336,6 +370,21 @@ audio_mclk_pin: audio-mclk-pin-active-state { ...@@ -336,6 +370,21 @@ audio_mclk_pin: audio-mclk-pin-active-state {
}; };
&pmi8998_gpios { &pmi8998_gpios {
gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
"NC",
"NC",
"TYPEC_UUSB_SEL",
"VIB_LDO_EN",
"NC",
"DISPLAY_TYPE_SEL",
"NC",
"NC",
"NC", /* GPIO_10 */
"NC",
"DIV_CLK3",
"SPMI_I2C_SEL",
"NC";
cam_vio_default: cam-vio-active-state { cam_vio_default: cam-vio-active-state {
pins = "gpio1"; pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL; function = PMIC_GPIO_FUNC_NORMAL;
...@@ -590,6 +639,156 @@ &sdhc2 { ...@@ -590,6 +639,156 @@ &sdhc2 {
&tlmm { &tlmm {
gpio-reserved-ranges = <0 4>, <81 4>; gpio-reserved-ranges = <0 4>, <81 4>;
gpio-line-names = "", /* GPIO_0 */
"",
"",
"",
"DEBUG_UART_TX",
"DEBUG_UART_RX",
"CAMSENSOR_I2C_SDA",
"CAMSENSOR_I2C_SCL",
"NC",
"NC",
"MDP_VSYNC_P", /* GPIO_10 */
"RGBC_IR_INT",
"NFC_VEN",
"CAM_MCLK0",
"CAM_MCLK1",
"NC",
"NC",
"CCI_I2C_SDA0",
"CCI_I2C_SCL0",
"CCI_I2C_SDA1",
"CCI_I2C_SCL1", /* GPIO_20 */
"MAIN_CAM_PWR_EN",
"TOF_INT_N",
"NC",
"NC",
"CHAT_CAM_PWR_EN",
"NC",
"TOF_RESET_N",
"CAM2_RSTN",
"NC",
"CAM1_RSTN", /* GPIO_30 */
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"NC",
"CC_DIR",
"UIM2_DETECT_EN",
"FP_RESET_N", /* GPIO_40 */
"NC",
"NC",
"NC",
"NC",
"BT_HCI_UART_TXD",
"BT_HCI_UART_RXD",
"BT_HCI_UART_CTS_N",
"BT_HCI_UART_RFR_N",
"NC",
"NC", /* GPIO_50 */
"NC",
"NC",
"CODEC_INT2_N",
"CODEC_INT1_N",
"APPS_I2C_SDA",
"APPS_I2C_SCL",
"FORCED_USB_BOOT",
"NC",
"NC",
"NC", /* GPIO_60 */
"NC",
"NC",
"TRAY2_DET_DS",
"CODEC_RST_N",
"WSA_L_EN",
"WSA_R_EN",
"NC",
"NC",
"NC",
"LPASS_SLIMBUS_CLK", /* GPIO_70 */
"LPASS_SLIMBUS_DATA0",
"LPASS_SLIMBUS_DATA1",
"BT_FM_SLIMBUS_DATA",
"BT_FM_SLIMBUS_CLK",
"NC",
"RF_LCD_ID_EN",
"NC",
"NC",
"NC",
"NC", /* GPIO_80 */
"SW_SERVICE",
"TX_GTR_THRES_IN",
"HW_ID0",
"HW_ID1",
"NC",
"NC",
"TS_I2C_SDA",
"TS_I2C_SCL",
"TS_RESET_N",
"NC", /* GPIO_90 */
"NC",
"NFC_IRQ",
"NFC_DWLD_EN",
"DISP_RESET_N",
"TRAY2_DET",
"CAM_SOF",
"RFFE6_CLK",
"RFFE6_DATA",
"DEBUG_GPIO0",
"DEBUG_GPIO1", /* GPIO_100 */
"GRFC4",
"NC",
"NC",
"RSVD",
"UIM2_DATA",
"UIM2_CLK",
"UIM2_RESET",
"UIM2_PRESENT",
"UIM1_DATA",
"UIM1_CLK", /* GPIO_110 */
"UIM1_RST",
"UIM1_PRESENT",
"UIM_BATT_ALARM",
"RSVD",
"NC",
"NC",
"ACCEL_INT",
"GYRO_INT",
"COMPASS_INT",
"ALS_PROX_INT_N", /* GPIO_120 */
"FP_INT_N",
"NC",
"BAROMETER_INT",
"ACC_COVER_OPEN",
"TS_INT_N",
"NC",
"NC",
"USB_DETECT_EN",
"NC",
"QLINK_REQUEST", /* GPIO_130 */
"QLINK_ENABLE",
"NC",
"NC",
"WMSS_RESET_N",
"PA_INDICATOR_OR",
"NC",
"RFFE3_DATA",
"RFFE3_CLK",
"RFFE4_DATA",
"RFFE4_CLK", /* GPIO_140 */
"RFFE5_DATA",
"RFFE5_CLK",
"GNSS_EN",
"MSS_LTE_COXM_TXD",
"MSS_LTE_COXM_RXD",
"RFFE2_DATA",
"RFFE2_CLK",
"RFFE1_DATA",
"RFFE1_CLK";
mdp_vsync_n: mdp-vsync-n-state { mdp_vsync_n: mdp-vsync-n-state {
pins = "gpio10"; pins = "gpio10";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7