USB: cxacru: Use a bulk/int URB to access the command endpoint

The command endpoint is either a bulk or interrupt endpoint, but using
the wrong type of transfer causes an error if CONFIG_USB_DEBUG is
enabled after commit f661c6f8, which
checks for this mismatch.

Detect which type of endpoint it is and use a bulk/int URB as
appropriate. There are other function calls specifying a bulk pipe,
but usb_clear_halt doesn't use the pipe type (only the endpoint) and
usb_bulk_msg auto-detects interrupt transfers.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: stable <stable@kernel.org> [.34 and newer]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/atm/cxacru.c

@@ -1127,6 +1127,7 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 {
 	struct cxacru_data *instance;
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD];
 	int ret;
 
 	/* instance init */
@@ -1171,6 +1172,14 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 		goto fail;
 	}
 
+	if (!cmd_ep) {
+		dbg("cxacru_bind: no command endpoint");
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	if ((cmd_ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+			== USB_ENDPOINT_XFER_INT) {
 		usb_fill_int_urb(instance->rcv_urb,
 			usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
 			instance->rcv_buf, PAGE_SIZE,
@@ -1180,6 +1189,17 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 			usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
 			instance->snd_buf, PAGE_SIZE,
 			cxacru_blocking_completion, &instance->snd_done, 4);
+	} else {
+		usb_fill_bulk_urb(instance->rcv_urb,
+			usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD),
+			instance->rcv_buf, PAGE_SIZE,
+			cxacru_blocking_completion, &instance->rcv_done);
+
+		usb_fill_bulk_urb(instance->snd_urb,
+			usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
+			instance->snd_buf, PAGE_SIZE,
+			cxacru_blocking_completion, &instance->snd_done);
+	}
 
 	mutex_init(&instance->cm_serialize);