pinctrl: renesas: rzg2l: Move arg and index in the main function block

Move arg and index in the main block of the function as they are used by
more than one case block of switch-case (3 out of 4 for arg, 2 out of 4
for index). In this way some lines of code are removed.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-4-claudiu.beznea.uj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

drivers/pinctrl/renesas/pinctrl-rzg2l.c

@@ -842,7 +842,7 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 	struct rzg2l_pinctrl_pin_settings settings = pctrl->settings[_pin];
 	unsigned int *pin_data = pin->drv_data;
 	enum pin_config_param param;
-	unsigned int i;
+	unsigned int i, arg, index;
 	u32 cfg, off;
 	int ret;
 	u8 bit;
@@ -864,24 +864,21 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 	for (i = 0; i < num_configs; i++) {
 		param = pinconf_to_config_param(_configs[i]);
 		switch (param) {
-		case PIN_CONFIG_INPUT_ENABLE: {
-			unsigned int arg =
-					pinconf_to_config_argument(_configs[i]);
+		case PIN_CONFIG_INPUT_ENABLE:
+			arg = pinconf_to_config_argument(_configs[i]);
 
 			if (!(cfg & PIN_CFG_IEN))
 				return -EINVAL;
 
 			rzg2l_rmw_pin_config(pctrl, IEN(off), bit, IEN_MASK, !!arg);
 			break;
-		}
 
 		case PIN_CONFIG_POWER_SOURCE:
 			settings.power_source = pinconf_to_config_argument(_configs[i]);
 			break;
 
-		case PIN_CONFIG_DRIVE_STRENGTH: {
-			unsigned int arg = pinconf_to_config_argument(_configs[i]);
-			unsigned int index;
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			arg = pinconf_to_config_argument(_configs[i]);
 
 			if (!(cfg & PIN_CFG_IOLH_A) || hwcfg->drive_strength_ua)
 				return -EINVAL;
@@ -896,7 +893,6 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 
 			rzg2l_rmw_pin_config(pctrl, IOLH(off), bit, IOLH_MASK, index);
 			break;
-		}
 
 		case PIN_CONFIG_DRIVE_STRENGTH_UA:
 			if (!(cfg & (PIN_CFG_IOLH_A | PIN_CFG_IOLH_B | PIN_CFG_IOLH_C)) ||
@@ -906,9 +902,8 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 			settings.drive_strength_ua = pinconf_to_config_argument(_configs[i]);
 			break;
 
-		case PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS: {
-			unsigned int arg = pinconf_to_config_argument(_configs[i]);
-			unsigned int index;
+		case PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS:
+			arg = pinconf_to_config_argument(_configs[i]);
 
 			if (!(cfg & PIN_CFG_IOLH_B) || !hwcfg->iolh_groupb_oi[0])
 				return -EINVAL;
@@ -922,7 +917,6 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 
 			rzg2l_rmw_pin_config(pctrl, IOLH(off), bit, IOLH_MASK, index);
 			break;
-		}
 
 		default:
 			return -EOPNOTSUPP;