drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready

The downstream driver models this PLL lock check as an if-elseif-else.
The only way to reach the else case where pll_locked=true [1] is by
succeeding both readl_poll_timeout_atomic calls (which return zero on
success) in the if _and_ elseif condition.  Hence both the "lock" and
"ready" bit need to be tested in the SM_READY_STATUS register before
considering the PLL locked and ready to go.

Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630).

[1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302

Fixes: f079f6d9 ("drm/msm/dsi: Add PHY/PLL for 8x96")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210906202552.824598-1-marijn.suijten@somainline.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c

@@ -110,14 +110,13 @@ static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX];
 static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,
 				    u32 nb_tries, u32 timeout_us)
 {
-	bool pll_locked = false;
+	bool pll_locked = false, pll_ready = false;
 	void __iomem *base = pll_14nm->phy->pll_base;
 	u32 tries, val;
 
 	tries = nb_tries;
 	while (tries--) {
-		val = dsi_phy_read(base +
-			       REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
+		val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
 		pll_locked = !!(val & BIT(5));
 
 		if (pll_locked)
@@ -126,23 +125,24 @@ static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,
 		udelay(timeout_us);
 	}
 
-	if (!pll_locked) {
+	if (!pll_locked)
+		goto out;
+
 	tries = nb_tries;
 	while (tries--) {
-			val = dsi_phy_read(base +
-				REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
-			pll_locked = !!(val & BIT(0));
+		val = dsi_phy_read(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
+		pll_ready = !!(val & BIT(0));
 
-			if (pll_locked)
+		if (pll_ready)
 			break;
 
 		udelay(timeout_us);
 	}
-	}
 
-	DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
+out:
+	DBG("DSI PLL is %slocked, %sready", pll_locked ? "" : "*not* ", pll_ready ? "" : "*not* ");
 
-	return pll_locked;
+	return pll_locked && pll_ready;
 }
 
 static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf)