Commit 90c7c0c2 authored by Thomas Gleixner's avatar Thomas Gleixner

Merge branch 'clockevents/4.17' of...

Merge branch 'clockevents/4.17' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clockevent updates from Daniel Lezcano:

 - Fix timer name and register flow for imx's timer tmp and handle
   different counter width (Anson Huang)

 - Add the NPCM7xx timer support (Tomer Maimon)
parents bd031430 0136c741
Nuvoton NPCM7xx timer
Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit
timer counters.
Required properties:
- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750.
- reg : Offset and length of the register set for the device.
- interrupts : Contain the timer interrupt with flags for
falling edge.
- clocks : phandle of timer reference clock (usually a 25 MHz clock).
Example:
timer@f0008000 {
compatible = "nuvoton,npcm750-timer";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf0008000 0x50>;
clocks = <&clk NPCM7XX_CLK_TIMER>;
};
......@@ -15,7 +15,7 @@ Required properties:
- interrupts : Should be the clock event device interrupt.
- clocks : The clocks provided by the SoC to drive the timer, must contain
an entry for each entry in clock-names.
- clock-names : Must include the following entries: "igp" and "per".
- clock-names : Must include the following entries: "ipg" and "per".
Example:
tpm5: tpm@40260000 {
......
......@@ -130,6 +130,14 @@ config VT8500_TIMER
help
Enables support for the VT8500 driver.
config NPCM7XX_TIMER
bool "NPCM7xx timer driver" if COMPILE_TEST
depends on HAS_IOMEM
select CLKSRC_MMIO
help
Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx architecture,
While TIMER0 serves as clockevent and TIMER1 serves as clocksource.
config CADENCE_TTC_TIMER
bool "Cadence TTC timer driver" if COMPILE_TEST
depends on COMMON_CLK
......
......@@ -55,6 +55,7 @@ obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
obj-$(CONFIG_OWL_TIMER) += owl-timer.o
obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o
obj-$(CONFIG_NPCM7XX_TIMER) += timer-npcm7xx.o
obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
......
......@@ -17,9 +17,14 @@
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
#define TPM_PARAM 0x4
#define TPM_PARAM_WIDTH_SHIFT 16
#define TPM_PARAM_WIDTH_MASK (0xff << 16)
#define TPM_SC 0x10
#define TPM_SC_CMOD_INC_PER_CNT (0x1 << 3)
#define TPM_SC_CMOD_DIV_DEFAULT 0x3
#define TPM_SC_CMOD_DIV_MAX 0x7
#define TPM_SC_TOF_MASK (0x1 << 7)
#define TPM_CNT 0x14
#define TPM_MOD 0x18
#define TPM_STATUS 0x1c
......@@ -29,8 +34,11 @@
#define TPM_C0SC_MODE_SHIFT 2
#define TPM_C0SC_MODE_MASK 0x3c
#define TPM_C0SC_MODE_SW_COMPARE 0x4
#define TPM_C0SC_CHF_MASK (0x1 << 7)
#define TPM_C0V 0x24
static int counter_width;
static int rating;
static void __iomem *timer_base;
static struct clock_event_device clockevent_tpm;
......@@ -83,10 +91,11 @@ static int __init tpm_clocksource_init(unsigned long rate)
tpm_delay_timer.freq = rate;
register_current_timer_delay(&tpm_delay_timer);
sched_clock_register(tpm_read_sched_clock, 32, rate);
sched_clock_register(tpm_read_sched_clock, counter_width, rate);
return clocksource_mmio_init(timer_base + TPM_CNT, "imx-tpm",
rate, 200, 32, clocksource_mmio_readl_up);
rate, rating, counter_width,
clocksource_mmio_readl_up);
}
static int tpm_set_next_event(unsigned long delta,
......@@ -139,7 +148,6 @@ static struct clock_event_device clockevent_tpm = {
.set_state_oneshot = tpm_set_state_oneshot,
.set_next_event = tpm_set_next_event,
.set_state_shutdown = tpm_set_state_shutdown,
.rating = 200,
};
static int __init tpm_clockevent_init(unsigned long rate, int irq)
......@@ -149,10 +157,11 @@ static int __init tpm_clockevent_init(unsigned long rate, int irq)
ret = request_irq(irq, tpm_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"i.MX7ULP TPM Timer", &clockevent_tpm);
clockevent_tpm.rating = rating;
clockevent_tpm.cpumask = cpumask_of(0);
clockevent_tpm.irq = irq;
clockevents_config_and_register(&clockevent_tpm,
rate, 300, 0xfffffffe);
clockevents_config_and_register(&clockevent_tpm, rate, 300,
GENMASK(counter_width - 1, 1));
return ret;
}
......@@ -179,7 +188,7 @@ static int __init tpm_timer_init(struct device_node *np)
ipg = of_clk_get_by_name(np, "ipg");
per = of_clk_get_by_name(np, "per");
if (IS_ERR(ipg) || IS_ERR(per)) {
pr_err("tpm: failed to get igp or per clk\n");
pr_err("tpm: failed to get ipg or per clk\n");
ret = -ENODEV;
goto err_clk_get;
}
......@@ -197,6 +206,11 @@ static int __init tpm_timer_init(struct device_node *np)
goto err_per_clk_enable;
}
counter_width = (readl(timer_base + TPM_PARAM) & TPM_PARAM_WIDTH_MASK)
>> TPM_PARAM_WIDTH_SHIFT;
/* use rating 200 for 32-bit counter and 150 for 16-bit counter */
rating = counter_width == 0x20 ? 200 : 150;
/*
* Initialize tpm module to a known state
* 1) Counter disabled
......@@ -205,16 +219,25 @@ static int __init tpm_timer_init(struct device_node *np)
* 4) Channel0 disabled
* 5) DMA transfers disabled
*/
/* make sure counter is disabled */
writel(0, timer_base + TPM_SC);
/* TOF is W1C */
writel(TPM_SC_TOF_MASK, timer_base + TPM_SC);
writel(0, timer_base + TPM_CNT);
writel(0, timer_base + TPM_C0SC);
/* CHF is W1C */
writel(TPM_C0SC_CHF_MASK, timer_base + TPM_C0SC);
/* increase per cnt, div 8 by default */
writel(TPM_SC_CMOD_INC_PER_CNT | TPM_SC_CMOD_DIV_DEFAULT,
/*
* increase per cnt,
* div 8 for 32-bit counter and div 128 for 16-bit counter
*/
writel(TPM_SC_CMOD_INC_PER_CNT |
(counter_width == 0x20 ?
TPM_SC_CMOD_DIV_DEFAULT : TPM_SC_CMOD_DIV_MAX),
timer_base + TPM_SC);
/* set MOD register to maximum for free running mode */
writel(0xffffffff, timer_base + TPM_MOD);
writel(GENMASK(counter_width - 1, 0), timer_base + TPM_MOD);
rate = clk_get_rate(per) >> 3;
ret = tpm_clocksource_init(rate);
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2014-2018 Nuvoton Technologies tomer.maimon@nuvoton.com
* All rights reserved.
*
* Copyright 2017 Google, Inc.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clockchips.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include "timer-of.h"
/* Timers registers */
#define NPCM7XX_REG_TCSR0 0x0 /* Timer 0 Control and Status Register */
#define NPCM7XX_REG_TICR0 0x8 /* Timer 0 Initial Count Register */
#define NPCM7XX_REG_TCSR1 0x4 /* Timer 1 Control and Status Register */
#define NPCM7XX_REG_TICR1 0xc /* Timer 1 Initial Count Register */
#define NPCM7XX_REG_TDR1 0x14 /* Timer 1 Data Register */
#define NPCM7XX_REG_TISR 0x18 /* Timer Interrupt Status Register */
/* Timers control */
#define NPCM7XX_Tx_RESETINT 0x1f
#define NPCM7XX_Tx_PERIOD BIT(27)
#define NPCM7XX_Tx_INTEN BIT(29)
#define NPCM7XX_Tx_COUNTEN BIT(30)
#define NPCM7XX_Tx_ONESHOT 0x0
#define NPCM7XX_Tx_OPER GENMASK(3, 27)
#define NPCM7XX_Tx_MIN_PRESCALE 0x1
#define NPCM7XX_Tx_TDR_MASK_BITS 24
#define NPCM7XX_Tx_MAX_CNT 0xFFFFFF
#define NPCM7XX_T0_CLR_INT 0x1
#define NPCM7XX_Tx_CLR_CSR 0x0
/* Timers operating mode */
#define NPCM7XX_START_PERIODIC_Tx (NPCM7XX_Tx_PERIOD | NPCM7XX_Tx_COUNTEN | \
NPCM7XX_Tx_INTEN | \
NPCM7XX_Tx_MIN_PRESCALE)
#define NPCM7XX_START_ONESHOT_Tx (NPCM7XX_Tx_ONESHOT | NPCM7XX_Tx_COUNTEN | \
NPCM7XX_Tx_INTEN | \
NPCM7XX_Tx_MIN_PRESCALE)
#define NPCM7XX_START_Tx (NPCM7XX_Tx_COUNTEN | NPCM7XX_Tx_PERIOD | \
NPCM7XX_Tx_MIN_PRESCALE)
#define NPCM7XX_DEFAULT_CSR (NPCM7XX_Tx_CLR_CSR | NPCM7XX_Tx_MIN_PRESCALE)
static int npcm7xx_timer_resume(struct clock_event_device *evt)
{
struct timer_of *to = to_timer_of(evt);
u32 val;
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
val |= NPCM7XX_Tx_COUNTEN;
writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
return 0;
}
static int npcm7xx_timer_shutdown(struct clock_event_device *evt)
{
struct timer_of *to = to_timer_of(evt);
u32 val;
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
val &= ~NPCM7XX_Tx_COUNTEN;
writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
return 0;
}
static int npcm7xx_timer_oneshot(struct clock_event_device *evt)
{
struct timer_of *to = to_timer_of(evt);
u32 val;
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
val &= ~NPCM7XX_Tx_OPER;
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
val |= NPCM7XX_START_ONESHOT_Tx;
writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
return 0;
}
static int npcm7xx_timer_periodic(struct clock_event_device *evt)
{
struct timer_of *to = to_timer_of(evt);
u32 val;
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
val &= ~NPCM7XX_Tx_OPER;
writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0);
val |= NPCM7XX_START_PERIODIC_Tx;
writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
return 0;
}
static int npcm7xx_clockevent_set_next_event(unsigned long evt,
struct clock_event_device *clk)
{
struct timer_of *to = to_timer_of(clk);
u32 val;
writel(evt, timer_of_base(to) + NPCM7XX_REG_TICR0);
val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
val |= NPCM7XX_START_Tx;
writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
return 0;
}
static irqreturn_t npcm7xx_timer0_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = (struct clock_event_device *)dev_id;
struct timer_of *to = to_timer_of(evt);
writel(NPCM7XX_T0_CLR_INT, timer_of_base(to) + NPCM7XX_REG_TISR);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct timer_of npcm7xx_to = {
.flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
.clkevt = {
.name = "npcm7xx-timer0",
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = npcm7xx_clockevent_set_next_event,
.set_state_shutdown = npcm7xx_timer_shutdown,
.set_state_periodic = npcm7xx_timer_periodic,
.set_state_oneshot = npcm7xx_timer_oneshot,
.tick_resume = npcm7xx_timer_resume,
.rating = 300,
},
.of_irq = {
.handler = npcm7xx_timer0_interrupt,
.flags = IRQF_TIMER | IRQF_IRQPOLL,
},
};
static void __init npcm7xx_clockevents_init(void)
{
writel(NPCM7XX_DEFAULT_CSR,
timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR0);
writel(NPCM7XX_Tx_RESETINT,
timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TISR);
npcm7xx_to.clkevt.cpumask = cpumask_of(0);
clockevents_config_and_register(&npcm7xx_to.clkevt,
timer_of_rate(&npcm7xx_to),
0x1, NPCM7XX_Tx_MAX_CNT);
}
static void __init npcm7xx_clocksource_init(void)
{
u32 val;
writel(NPCM7XX_DEFAULT_CSR,
timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
writel(NPCM7XX_Tx_MAX_CNT,
timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TICR1);
val = readl(timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
val |= NPCM7XX_START_Tx;
writel(val, timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
clocksource_mmio_init(timer_of_base(&npcm7xx_to) +
NPCM7XX_REG_TDR1,
"npcm7xx-timer1", timer_of_rate(&npcm7xx_to),
200, (unsigned int)NPCM7XX_Tx_TDR_MASK_BITS,
clocksource_mmio_readl_down);
}
static int __init npcm7xx_timer_init(struct device_node *np)
{
int ret;
ret = timer_of_init(np, &npcm7xx_to);
if (ret)
return ret;
/* Clock input is divided by PRESCALE + 1 before it is fed */
/* to the counter */
npcm7xx_to.of_clk.rate = npcm7xx_to.of_clk.rate /
(NPCM7XX_Tx_MIN_PRESCALE + 1);
npcm7xx_clocksource_init();
npcm7xx_clockevents_init();
pr_info("Enabling NPCM7xx clocksource timer base: %px, IRQ: %d ",
timer_of_base(&npcm7xx_to), timer_of_irq(&npcm7xx_to));
return 0;
}
TIMER_OF_DECLARE(npcm7xx, "nuvoton,npcm750-timer", npcm7xx_timer_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment