arm64: dts: qcom: sc7280: Factor out Chrome common fragment

This factors out a device tree fragment from some sc7280 device
trees. It represents the device tree bits that should be included for
"Chrome" based sc7280 boards. On these boards the bootloader (Coreboot
+ Depthcharge) configures things slightly different than the
bootloader that Qualcomm provides. The modem firmware on these boards
also works differently than on other Qulacomm products and thus the
reserved memory map needs to be adjusted.

NOTES:
- This is _not_ quite a no-op change. The "herobrine" and "idp"
  fragments here were different and it looks like someone simply
  forgot to update the herobrine version. This updates a few numbers
  to match IDP. This will also cause the `pmk8350_pon` to be disabled
  on idp/crd, which I belive is a correct change.
- At the moment this assumes LTE skus. Once it's clearer how WiFi SKUs
  will work (how much of the memory map they can reclaim) we may add
  an extra fragment that will rejigger one way or the other.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220125144316.v2.3.Iac012fa8d727be46448d47027a1813ea716423ce@changeid

arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 fragment for devices with Chrome bootloader
+ *
+ * This file mainly tries to abstract out the memory protections put into
+ * place by the Chrome bootloader which are different than what's put into
+ * place by Qualcomm's typical bootloader. It also has a smattering of other
+ * things that will hold true for any conceivable Chrome design
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the setup for Chrome boards.
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &reserved_xbl_uefi_log;
+/delete-node/ &sec_apps_mem;
+
+/ {
+	reserved-memory {
+		adsp_mem: memory@86700000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		camera_mem: memory@8ad00000 {
+			reg = <0x0 0x8ad00000 0x0 0x500000>;
+			no-map;
+		};
+
+		venus_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x500000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		wpss_mem: memory@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		mba_mem: memory@9c700000 {
+			reg = <0x0 0x9c700000 0x0 0x200000>;
+			no-map;
+		};
+	};
+};
+
+/* The PMIC PON code isn't compatible w/ how Chrome EC/BIOS handle things. */
+&pmk8350_pon {
+	status = "disabled";
+};
+
+/*
+ * Chrome designs always boot from SPI flash hooked up to the qspi.
+ *
+ * It's expected that all boards will support "dual SPI" at 37.5 MHz.
+ * If some boards need a different speed or have a package that allows
+ * Quad SPI together with WP then those boards can easily override.
+ */
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
+
+	spi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <37500000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+/* Modem setup is different on Chrome setups than typical Qualcomm setup */
+&remoteproc_mpss {
+	status = "okay";
+	compatible = "qcom,sc7280-mss-pil";
+	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+	memory-region = <&mba_mem>, <&mpss_mem>;
+};
+
+/* Increase the size from 2.5MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x9c900000 0x0 0x800000>;
+};

arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts

@@ -22,62 +22,15 @@
 #include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
 
+#include "sc7280-chrome-common.dtsi"
+
 / {
 	model = "Google Herobrine (rev0)";
 	compatible = "google,herobrine",
 		     "qcom,sc7280";
 };
 
-/*
- * Reserved memory changes
- *
- * Delete all unused memory nodes and define the peripheral memory regions
- * required by the board dts.
- *
- */
-
-/delete-node/ &hyp_mem;
-/delete-node/ &xbl_mem;
-/delete-node/ &sec_apps_mem;
-
-/* Increase the size from 2MB to 8MB */
-&rmtfs_mem {
-	reg = <0x0 0x83600000 0x0 0x800000>;
-};
-
 / {
-	reserved-memory {
-		adsp_mem: memory@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
-		camera_mem: memory@8ad00000 {
-			reg = <0x0 0x8ad00000 0x0 0x500000>;
-			no-map;
-		};
-
-		venus_mem: memory@8b200000 {
-			reg = <0x0 0x8b200000 0x0 0x500000>;
-			no-map;
-		};
-
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
-		wpss_mem: memory@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
-
-		mba_mem: memory@9c700000 {
-			reg = <0x0 0x9c700000 0x0 0x200000>;
-			no-map;
-		};
-	};
-
 	aliases {
 		serial0 = &uart5;
 		serial1 = &uart7;
@@ -691,10 +644,6 @@ &pmk8350_gpios {
 	status = "disabled"; /* No GPIOs are connected */
 };
 
-&pmk8350_pon {
-	status = "disabled";
-};
-
 &pmk8350_rtc {
 	status = "disabled";
 };
@@ -717,21 +666,6 @@ &qfprom {
 	vcc-supply = <&vdd_qfprom>;
 };
 
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-
-		spi-max-frequency = <37500000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-	};
-};
-
 &qupv3_id_0 {
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi

@@ -13,6 +13,8 @@
 #include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
 
+#include "sc7280-chrome-common.dtsi"
+
 / {
 	aliases {
 		bluetooth0 = &bluetooth;
@@ -50,58 +52,6 @@ nvme_3v3_regulator: nvme-3v3-regulator {
 	};
 };
 
-/*
- * Reserved memory changes
- *
- * Delete all unused memory nodes and define the peripheral memory regions
- * required by the board dts.
- *
- */
-
-/delete-node/ &hyp_mem;
-/delete-node/ &xbl_mem;
-/delete-node/ &reserved_xbl_uefi_log;
-/delete-node/ &sec_apps_mem;
-
-/* Increase the size from 2.5MB to 8MB */
-&rmtfs_mem {
-	reg = <0x0 0x9c900000 0x0 0x800000>;
-};
-
-/ {
-	reserved-memory {
-		adsp_mem: memory@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
-		camera_mem: memory@8ad00000 {
-			reg = <0x0 0x8ad00000 0x0 0x500000>;
-			no-map;
-		};
-
-		venus_mem: memory@8b200000 {
-			reg = <0x0 0x8b200000 0x0 0x500000>;
-			no-map;
-		};
-
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
-		wpss_mem: memory@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
-
-		mba_mem: memory@9c700000 {
-			reg = <0x0 0x9c700000 0x0 0x200000>;
-			no-map;
-		};
-	};
-};
-
 &apps_rsc {
 	pm7325-regulators {
 		compatible = "qcom,pm7325-rpmh-regulators";
@@ -318,20 +268,6 @@ &qfprom {
 	vcc-supply = <&vreg_l1c_1p8>;
 };
 
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <37500000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-	};
-};
-
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -340,13 +276,6 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
-&remoteproc_mpss {
-	status = "okay";
-	compatible = "qcom,sc7280-mss-pil";
-	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
-	memory-region = <&mba_mem &mpss_mem>;
-};
-
 &sdhc_1 {
 	status = "okay";