Merge tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.16-rc5.  They include:

   - gadget driver fixes for reported issues

   - xhci fixes for reported problems.

   - config endpoint parsing fixes for where we got bitfields wrong

  Most of these have been in linux-next, the remaining few were not, but
  got lots of local testing in my systems and in some cloud testing
  infrastructures"

* tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: core: config: using bit mask instead of individual bits
  usb: core: config: fix validation of wMaxPacketValue entries
  USB: gadget: zero allocate endpoint 0 buffers
  USB: gadget: detect too-big endpoint 0 requests
  xhci: avoid race between disable slot command and host runtime suspend
  xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending
  Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"

drivers/usb/core/config.c

@@ -406,7 +406,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
 	 * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0
 	 * (see the end of section 5.6.3), so don't warn about them.
 	 */
-	maxp = usb_endpoint_maxp(&endpoint->desc);
+	maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize);
 	if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) {
 		dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n",
 		    cfgno, inum, asnum, d->bEndpointAddress);
@@ -422,9 +422,9 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
 		maxpacket_maxes = full_speed_maxpacket_maxes;
 		break;
 	case USB_SPEED_HIGH:
-		/* Bits 12..11 are allowed only for HS periodic endpoints */
+		/* Multiple-transactions bits are allowed only for HS periodic endpoints */
 		if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) {
-			i = maxp & (BIT(12) | BIT(11));
+			i = maxp & USB_EP_MAXP_MULT_MASK;
 			maxp &= ~i;
 		}
 		fallthrough;

drivers/usb/dwc3/dwc3-qcom.c

@@ -649,7 +649,6 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
 	struct device_node	*np = pdev->dev.of_node, *dwc3_np;
 	struct device		*dev = &pdev->dev;
-	struct property		*prop;
 	int			ret;
 
 	dwc3_np = of_get_compatible_child(np, "snps,dwc3");
@@ -658,20 +657,6 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	prop = devm_kzalloc(dev, sizeof(*prop), GFP_KERNEL);
-	if (!prop) {
-		ret = -ENOMEM;
-		dev_err(dev, "unable to allocate memory for property\n");
-		goto node_put;
-	}
-
-	prop->name = "tx-fifo-resize";
-	ret = of_add_property(dwc3_np, prop);
-	if (ret) {
-		dev_err(dev, "unable to add property\n");
-		goto node_put;
-	}
-
 	ret = of_platform_populate(np, NULL, NULL, dev);
 	if (ret) {
 		dev_err(dev, "failed to register dwc3 core - %d\n", ret);

drivers/usb/gadget/composite.c

@@ -1679,6 +1679,18 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	struct usb_function		*f = NULL;
 	u8				endp;
 
+	if (w_length > USB_COMP_EP0_BUFSIZ) {
+		if (ctrl->bRequestType == USB_DIR_OUT) {
+			goto done;
+		} else {
+			/* Cast away the const, we are going to overwrite on purpose. */
+			__le16 *temp = (__le16 *)&ctrl->wLength;
+
+			*temp = cpu_to_le16(USB_COMP_EP0_BUFSIZ);
+			w_length = USB_COMP_EP0_BUFSIZ;
+		}
+	}
+
 	/* partial re-init of the response message; the function or the
 	 * gadget might need to intercept e.g. a control-OUT completion
 	 * when we delegate to it.
@@ -2209,7 +2221,7 @@ int composite_dev_prepare(struct usb_composite_driver *composite,
 	if (!cdev->req)
 		return -ENOMEM;
 
-	cdev->req->buf = kmalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL);
+	cdev->req->buf = kzalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL);
 	if (!cdev->req->buf)
 		goto fail;
 

drivers/usb/gadget/legacy/dbgp.c

@@ -137,7 +137,7 @@ static int dbgp_enable_ep_req(struct usb_ep *ep)
 		goto fail_1;
 	}
 
-	req->buf = kmalloc(DBGP_REQ_LEN, GFP_KERNEL);
+	req->buf = kzalloc(DBGP_REQ_LEN, GFP_KERNEL);
 	if (!req->buf) {
 		err = -ENOMEM;
 		stp = 2;
@@ -345,6 +345,19 @@ static int dbgp_setup(struct usb_gadget *gadget,
 	void *data = NULL;
 	u16 len = 0;
 
+	if (length > DBGP_REQ_LEN) {
+		if (ctrl->bRequestType == USB_DIR_OUT) {
+			return err;
+		} else {
+			/* Cast away the const, we are going to overwrite on purpose. */
+			__le16 *temp = (__le16 *)&ctrl->wLength;
+
+			*temp = cpu_to_le16(DBGP_REQ_LEN);
+			length = DBGP_REQ_LEN;
+		}
+	}
+
+
 	if (request == USB_REQ_GET_DESCRIPTOR) {
 		switch (value>>8) {
 		case USB_DT_DEVICE:

drivers/usb/gadget/legacy/inode.c

@@ -110,6 +110,8 @@ enum ep0_state {
 /* enough for the whole queue: most events invalidate others */
 #define	N_EVENT			5
 
+#define RBUF_SIZE		256
+
 struct dev_data {
 	spinlock_t			lock;
 	refcount_t			count;
@@ -144,7 +146,7 @@ struct dev_data {
 	struct dentry			*dentry;
 
 	/* except this scratch i/o buffer for ep0 */
-	u8				rbuf [256];
+	u8				rbuf[RBUF_SIZE];
 };
 
 static inline void get_dev (struct dev_data *data)
@@ -1331,6 +1333,18 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	u16				w_value = le16_to_cpu(ctrl->wValue);
 	u16				w_length = le16_to_cpu(ctrl->wLength);
 
+	if (w_length > RBUF_SIZE) {
+		if (ctrl->bRequestType == USB_DIR_OUT) {
+			return value;
+		} else {
+			/* Cast away the const, we are going to overwrite on purpose. */
+			__le16 *temp = (__le16 *)&ctrl->wLength;
+
+			*temp = cpu_to_le16(RBUF_SIZE);
+			w_length = RBUF_SIZE;
+		}
+	}
+
 	spin_lock (&dev->lock);
 	dev->setup_abort = 0;
 	if (dev->state == STATE_DEV_UNCONNECTED) {

drivers/usb/host/xhci-hub.c

@@ -717,6 +717,7 @@ static int xhci_enter_test_mode(struct xhci_hcd *xhci,
 			continue;
 
 		retval = xhci_disable_slot(xhci, i);
+		xhci_free_virt_device(xhci, i);
 		if (retval)
 			xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n",
 				 i, retval);

drivers/usb/host/xhci-ring.c

@@ -1525,7 +1525,6 @@ static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id)
 	if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
 		/* Delete default control endpoint resources */
 		xhci_free_device_endpoint_resources(xhci, virt_dev, true);
-	xhci_free_virt_device(xhci, slot_id);
 }
 
 static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,

drivers/usb/host/xhci.c

@@ -3934,7 +3934,6 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 	struct xhci_slot_ctx *slot_ctx;
 	int i, ret;
 
-#ifndef CONFIG_USB_DEFAULT_PERSIST
 	/*
 	 * We called pm_runtime_get_noresume when the device was attached.
 	 * Decrement the counter here to allow controller to runtime suspend
@@ -3942,7 +3941,6 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 	 */
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		pm_runtime_put_noidle(hcd->self.controller);
-#endif
 
 	ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
 	/* If the host is halted due to driver unload, we still need to free the
@@ -3961,8 +3959,7 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 		del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
 	}
 	virt_dev->udev = NULL;
-	ret = xhci_disable_slot(xhci, udev->slot_id);
-	if (ret)
+	xhci_disable_slot(xhci, udev->slot_id);
 	xhci_free_virt_device(xhci, udev->slot_id);
 }
 
@@ -3973,7 +3970,7 @@ int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id)
 	u32 state;
 	int ret = 0;
 
-	command = xhci_alloc_command(xhci, false, GFP_KERNEL);
+	command = xhci_alloc_command(xhci, true, GFP_KERNEL);
 	if (!command)
 		return -ENOMEM;
 
@@ -3998,6 +3995,15 @@ int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id)
 	}
 	xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	wait_for_completion(command->completion);
+
+	if (command->status != COMP_SUCCESS)
+		xhci_warn(xhci, "Unsuccessful disable slot %u command, status %d\n",
+			  slot_id, command->status);
+
+	xhci_free_command(xhci, command);
+
 	return ret;
 }
 
@@ -4094,22 +4100,19 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 
 	xhci_debugfs_create_slot(xhci, slot_id);
 
-#ifndef CONFIG_USB_DEFAULT_PERSIST
 	/*
 	 * If resetting upon resume, we can't put the controller into runtime
 	 * suspend if there is a device attached.
 	 */
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		pm_runtime_get_noresume(hcd->self.controller);
-#endif
 
 	/* Is this a LS or FS device under a HS hub? */
 	/* Hub or peripherial? */
 	return 1;
 
 disable_slot:
-	ret = xhci_disable_slot(xhci, udev->slot_id);
-	if (ret)
+	xhci_disable_slot(xhci, udev->slot_id);
 	xhci_free_virt_device(xhci, udev->slot_id);
 
 	return 0;
@@ -4240,6 +4243,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
 		mutex_unlock(&xhci->mutex);
 		ret = xhci_disable_slot(xhci, udev->slot_id);
+		xhci_free_virt_device(xhci, udev->slot_id);
 		if (!ret)
 			xhci_alloc_dev(hcd, udev);
 		kfree(command->completion);