net: ethernet: Use netif_rx().

Since commit
   baebdf48 ("net: dev: Makes sure netif_rx() can be invoked in any context.")

the function netif_rx() can be used in preemptible/thread context as
well as in interrupt context.

Use netif_rx().

Cc: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/asix/ax88796c_main.c

@@ -433,7 +433,7 @@ ax88796c_skb_return(struct ax88796c_device *ax_local,
 	netif_info(ax_local, rx_status, ndev, "< rx, len %zu, type 0x%x\n",
 		   skb->len + sizeof(struct ethhdr), skb->protocol);
 
-	status = netif_rx_ni(skb);
+	status = netif_rx(skb);
 	if (status != NET_RX_SUCCESS && net_ratelimit())
 		netif_info(ax_local, rx_err, ndev,
 			   "netif_rx status %d\n", status);

drivers/net/ethernet/davicom/dm9051.c

@@ -804,7 +804,7 @@ static int dm9051_loop_rx(struct board_info *db)
 		skb->protocol = eth_type_trans(skb, db->ndev);
 		if (db->ndev->features & NETIF_F_RXCSUM)
 			skb_checksum_none_assert(skb);
-		netif_rx_ni(skb);
+		netif_rx(skb);
 		db->ndev->stats.rx_bytes += rxlen;
 		db->ndev->stats.rx_packets++;
 		scanrr++;

drivers/net/ethernet/micrel/ks8851_spi.c

@@ -293,7 +293,7 @@ static void ks8851_wrfifo_spi(struct ks8851_net *ks, struct sk_buff *txp,
  */
 static void ks8851_rx_skb_spi(struct ks8851_net *ks, struct sk_buff *skb)
 {
-	netif_rx_ni(skb);
+	netif_rx(skb);
 }
 
 /**

drivers/net/ethernet/microchip/enc28j60.c

@@ -975,7 +975,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
 			/* update statistics */
 			ndev->stats.rx_packets++;
 			ndev->stats.rx_bytes += len;
-			netif_rx_ni(skb);
+			netif_rx(skb);
 		}
 	}
 	/*

drivers/net/ethernet/microchip/lan966x/lan966x_main.c

@@ -600,7 +600,7 @@ static irqreturn_t lan966x_xtr_irq_handler(int irq, void *args)
 				skb->offload_fwd_mark = 0;
 		}
 
-		netif_rx_ni(skb);
+		netif_rx(skb);
 		dev->stats.rx_bytes += len;
 		dev->stats.rx_packets++;
 

drivers/net/ethernet/qualcomm/qca_spi.c

@@ -435,7 +435,7 @@ qcaspi_receive(struct qcaspi *qca)
 				qca->rx_skb->protocol = eth_type_trans(
 					qca->rx_skb, qca->rx_skb->dev);
 				skb_checksum_none_assert(qca->rx_skb);
-				netif_rx_ni(qca->rx_skb);
+				netif_rx(qca->rx_skb);
 				qca->rx_skb = netdev_alloc_skb_ip_align(net_dev,
 					net_dev->mtu + VLAN_ETH_HLEN);
 				if (!qca->rx_skb) {

drivers/net/ethernet/qualcomm/qca_uart.c

@@ -108,7 +108,7 @@ qca_tty_receive(struct serdev_device *serdev, const unsigned char *data,
 			qca->rx_skb->protocol = eth_type_trans(
 						qca->rx_skb, qca->rx_skb->dev);
 			skb_checksum_none_assert(qca->rx_skb);
-			netif_rx_ni(qca->rx_skb);
+			netif_rx(qca->rx_skb);
 			qca->rx_skb = netdev_alloc_skb_ip_align(netdev,
 								netdev->mtu +
 								VLAN_ETH_HLEN);

drivers/net/ethernet/vertexcom/mse102x.c

@@ -362,7 +362,7 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 		mse102x_dump_packet(__func__, skb->len, skb->data);
 
 	skb->protocol = eth_type_trans(skb, mse->ndev);
-	netif_rx_ni(skb);
+	netif_rx(skb);
 
 	mse->ndev->stats.rx_packets++;
 	mse->ndev->stats.rx_bytes += rxlen;

drivers/net/ethernet/wiznet/w5100.c

@@ -883,7 +883,7 @@ static void w5100_rx_work(struct work_struct *work)
 	struct sk_buff *skb;
 
 	while ((skb = w5100_rx_skb(priv->ndev)))
-		netif_rx_ni(skb);
+		netif_rx(skb);
 
 	w5100_enable_intr(priv);
 }