Skip to content

L
linux
Commit 9119e33e authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'usb-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 

Pull USB fixes from Greg KH:
 "Here is a set of patches that revert all of the changes done to the
  pl2303 USB serial driver in the 3.12-rc timeframe, as it turns out
  they break some devices that work just fine on 3.11.  As it's not a
  good idea to break working systems, drop them all and they will be
  reworked for future kernel versions such that there is no breakage.

  I've also included a MAINTAINERS update for the USB serial subsystem
  and a new device id for the ftdi_sio driver as well"

* tag 'usb-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: ftdi_sio: add id for Z3X Box device
  USB: Maintainers change for usb serial drivers
  Revert "USB: pl2303: restrict the divisor based baud rate encoding method to the "HX" chip type"
  Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method"
  Revert "usb: pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method"
  Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates"
  Revert "usb: pl2303: move the two baud rate encoding methods to separate functions"
  Revert "usb: pl2303: increase the allowed baud rate range for the divisor based encoding method"
  Revert "usb: pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips"
  Revert "usb: pl2303: add two comments concerning the supported baud rates with HX chips"
  Revert "pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()"
  Revert "pl2303: improve the chip type information output on startup"
  Revert "pl2303: improve the chip type detection/distinction"
  Revert "USB: pl2303: distinguish between original and cloned HX chips"
parents f9adfbfb e1466ad5
Show whitespace changes
Inline Side-by-side
Showing with 66 additions and 268 deletions
MAINTAINERS
View file @ 9119e33e
......@@ -8917,61 +8917,14 @@ W: http://pegasus2.sourceforge.net/
S: Maintained
F: drivers/net/usb/rtl8150.c
USB SERIAL BELKIN F5U103 DRIVER
M: William Greathouse <wgreathouse@smva.com>
USB SERIAL SUBSYSTEM
M: Johan Hovold <jhovold@gmail.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/belkin_sa.*
USB SERIAL CYPRESS M8 DRIVER
M: Lonnie Mendez <dignome@gmail.com>
L: linux-usb@vger.kernel.org
S: Maintained
W: http://geocities.com/i0xox0i
W: http://firstlight.net/cvs
F: drivers/usb/serial/cypress_m8.*
USB SERIAL CYBERJACK DRIVER
M: Matthias Bruestle and Harald Welte <support@reiner-sct.com>
W: http://www.reiner-sct.de/support/treiber_cyberjack.php
S: Maintained
F: drivers/usb/serial/cyberjack.c
USB SERIAL DIGI ACCELEPORT DRIVER
M: Peter Berger <pberger@brimson.com>
M: Al Borchers <alborchers@steinerpoint.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/digi_acceleport.c
USB SERIAL DRIVER
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-usb@vger.kernel.org
S: Supported
F: Documentation/usb/usb-serial.txt
F: drivers/usb/serial/generic.c
F: drivers/usb/serial/usb-serial.c
F: drivers/usb/serial/
F: include/linux/usb/serial.h
USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
M: Gary Brubaker <xavyer@ix.netcom.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/empeg.c
USB SERIAL KEYSPAN DRIVER
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/serial/*keyspan*
USB SERIAL WHITEHEAT DRIVER
M: Support Department <support@connecttech.com>
L: linux-usb@vger.kernel.org
W: http://www.connecttech.com
S: Supported
F: drivers/usb/serial/whiteheat*
USB SMSC75XX ETHERNET DRIVER
M: Steve Glendinning <steve.glendinning@shawell.net>
L: netdev@vger.kernel.org
......
drivers/usb/serial/ftdi_sio.c
View file @ 9119e33e
......@@ -904,6 +904,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
/* Crucible Devices */
{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) },
{ } /* Terminating entry */
};
......
drivers/usb/serial/ftdi_sio_ids.h
View file @ 9119e33e
......@@ -1307,3 +1307,9 @@
* Manufacturer: Crucible Technologies
*/
#define FTDI_CT_COMET_PID 0x8e08
/*
* Product: Z3X Box
* Manufacturer: Smart GSM Team
*/
#define FTDI_Z3X_PID 0x0011
drivers/usb/serial/pl2303.c
View file @ 9119e33e
......@@ -4,11 +4,6 @@
* Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2003 IBM Corp.
*
* Copyright (C) 2009, 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
* - fixes, improvements and documentation for the baud rate encoding methods
* Copyright (C) 2013 Reinhard Max <max@suse.de>
* - fixes and improvements for the divisor based baud rate encoding method
*
* Original driver for 2.2.x by anonymous
*
* This program is free software; you can redistribute it and/or
......@@ -134,18 +129,10 @@ MODULE_DEVICE_TABLE(usb, id_table);
enum pl2303_type {
type_0, /* H version ? */
type_1, /* H version ? */
HX_TA, /* HX(A) / X(A) / TA version */ /* TODO: improve */
HXD_EA_RA_SA, /* HXD / EA / RA / SA version */ /* TODO: improve */
TB, /* TB version */
HX_CLONE, /* Cheap and less functional clone of the HX chip */
type_0, /* don't know the difference between type 0 and */
type_1, /* type 1, until someone from prolific tells us... */
HX, /* HX version of the pl2303 chip */
};
/*
* NOTE: don't know the difference between type 0 and type 1,
* until someone from Prolific tells us...
* TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants
*/
struct pl2303_serial_private {
enum pl2303_type type;
......@@ -185,7 +172,6 @@ static int pl2303_startup(struct usb_serial *serial)
{
struct pl2303_serial_private *spriv;
enum pl2303_type type = type_0;
char *type_str = "unknown (treating as type_0)";
unsigned char *buf;
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
......@@ -198,53 +184,15 @@ static int pl2303_startup(struct usb_serial *serial)
return -ENOMEM;
}
if (serial->dev->descriptor.bDeviceClass == 0x02) {
if (serial->dev->descriptor.bDeviceClass == 0x02)
type = type_0;
type_str = "type_0";
} else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) {
/*
* NOTE: The bcdDevice version is the only difference between
* the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB
*/
if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) {
/* Check if the device is a clone */
pl2303_vendor_read(0x9494, 0, serial, buf);
/*
* NOTE: Not sure if this read is really needed.
* The HX returns 0x00, the clone 0x02, but the Windows
* driver seems to ignore the value and continues.
*/
pl2303_vendor_write(0x0606, 0xaa, serial);
pl2303_vendor_read(0x8686, 0, serial, buf);
if (buf[0] != 0xaa) {
type = HX_CLONE;
type_str = "X/HX clone (limited functionality)";
} else {
type = HX_TA;
type_str = "X/HX/TA";
}
pl2303_vendor_write(0x0606, 0x00, serial);
} else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
== 0x400) {
type = HXD_EA_RA_SA;
type_str = "HXD/EA/RA/SA";
} else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
== 0x500) {
type = TB;
type_str = "TB";
} else {
dev_info(&serial->interface->dev,
"unknown/unsupported device type\n");
kfree(spriv);
kfree(buf);
return -ENODEV;
}
} else if (serial->dev->descriptor.bDeviceClass == 0x00
|| serial->dev->descriptor.bDeviceClass == 0xFF) {
else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
type = HX;
else if (serial->dev->descriptor.bDeviceClass == 0x00)
type = type_1;
type_str = "type_1";
}
dev_dbg(&serial->interface->dev, "device type: %s\n", type_str);
else if (serial->dev->descriptor.bDeviceClass == 0xFF)
type = type_1;
dev_dbg(&serial->interface->dev, "device type: %d\n", type);
spriv->type = type;
usb_set_serial_data(serial, spriv);
......@@ -259,10 +207,10 @@ static int pl2303_startup(struct usb_serial *serial)
pl2303_vendor_read(0x8383, 0, serial, buf);
pl2303_vendor_write(0, 1, serial);
pl2303_vendor_write(1, 0, serial);
if (type == type_0 || type == type_1)
pl2303_vendor_write(2, 0x24, serial);
else
if (type == HX)
pl2303_vendor_write(2, 0x44, serial);
else
pl2303_vendor_write(2, 0x24, serial);
kfree(buf);
return 0;
......@@ -316,174 +264,65 @@ static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value)
return retval;
}
static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
static void pl2303_encode_baudrate(struct tty_struct *tty,
struct usb_serial_port *port,
u8 buf[4])
{
/*
* NOTE: Only the values defined in baud_sup are supported !
* => if unsupported values are set, the PL2303 uses 9600 baud instead
* => HX clones just don't work at unsupported baud rates < 115200 baud,
* for baud rates > 115200 they run at 115200 baud
*/
const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
4800, 7200, 9600, 14400, 19200, 28800, 38400,
57600, 115200, 230400, 460800, 614400, 921600,
1228800, 2457600, 3000000, 6000000, 12000000 };
57600, 115200, 230400, 460800, 500000, 614400,
921600, 1228800, 2457600, 3000000, 6000000 };
struct usb_serial *serial = port->serial;
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int baud;
int i;
/*
* NOTE: With the exception of type_0/1 devices, the following
* additional baud rates are supported (tested with HX rev. 3A only):
* 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800,
* 403200, 806400. (*: not HX and HX clones)
*
* Maximum values: HXD, TB: 12000000; HX, TA: 6000000;
* type_0+1: 1228800; RA: 921600; HX clones, SA: 115200
*
* As long as we are not using this encoding method for anything else
* than the type_0+1, HX and HX clone chips, there is no point in
* complicating the code to support them.
* NOTE: Only the values defined in baud_sup are supported!
* => if unsupported values are set, the PL2303 seems to use
* 9600 baud (at least my PL2303X always does)
*/
int i;
baud = tty_get_baud_rate(tty);
dev_dbg(&port->dev, "baud requested = %d\n", baud);
if (!baud)
return;
/* Set baudrate to nearest supported value */
for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
if (baud_sup[i] > baud)
break;
}
if (i == ARRAY_SIZE(baud_sup))
baud = baud_sup[i - 1];
else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
baud = baud_sup[i - 1];
else
baud = baud_sup[i];
/* Respect the chip type specific baud rate limits */
/*
* FIXME: as long as we don't know how to distinguish between the
* HXD, EA, RA, and SA chip variants, allow the max. value of 12M.
*/
if (type == HX_TA)
baud = min_t(int, baud, 6000000);
else if (type == type_0 || type == type_1)
baud = min_t(int, baud, 1228800);
else if (type == HX_CLONE)
baud = min_t(int, baud, 115200);
/* Direct (standard) baud rate encoding method */
put_unaligned_le32(baud, buf);
return baud;
}
static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type,
u8 buf[4])
{
/*
* Divisor based baud rate encoding method
*
* NOTE: HX clones do NOT support this method.
* It's not clear if the type_0/1 chips support it.
*
* divisor = 12MHz * 32 / baudrate = 2^A * B
*
* with
*
* A = buf[1] & 0x0e
* B = buf[0] + (buf[1] & 0x01) << 8
*
* Special cases:
* => 8 < B < 16: device seems to work not properly
* => B <= 8: device uses the max. value B = 512 instead
*/
unsigned int A, B;
/* type_0, type_1 only support up to 1228800 baud */
if (spriv->type != HX)
baud = min_t(int, baud, 1228800);
/*
* NOTE: The Windows driver allows maximum baud rates of 110% of the
* specified maximium value.
* Quick tests with early (2004) HX (rev. A) chips suggest, that even
* higher baud rates (up to the maximum of 24M baud !) are working fine,
* but that should really be tested carefully in "real life" scenarios
* before removing the upper limit completely.
* Baud rates smaller than the specified 75 baud are definitely working
* fine.
*/
if (type == type_0 || type == type_1)
baud = min_t(int, baud, 1228800 * 1.1);
else if (type == HX_TA)
baud = min_t(int, baud, 6000000 * 1.1);
else if (type == HXD_EA_RA_SA)
/* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */
/*
* FIXME: as long as we don't know how to distinguish between
* these chip variants, allow the max. of these values
*/
baud = min_t(int, baud, 12000000 * 1.1);
else if (type == TB)
baud = min_t(int, baud, 12000000 * 1.1);
/* Determine factors A and B */
A = 0;
B = 12000000 * 32 / baud; /* 12MHz */
B <<= 1; /* Add one bit for rounding */
while (B > (512 << 1) && A <= 14) {
A += 2;
B >>= 2;
}
if (A > 14) { /* max. divisor = min. baudrate reached */
A = 14;
B = 512;
/* => ~45.78 baud */
if (baud <= 115200) {
put_unaligned_le32(baud, buf);
} else {
B = (B + 1) >> 1; /* Round the last bit */
}
/* Handle special cases */
if (B == 512)
B = 0; /* also: 1 to 8 */
else if (B < 16)
/*
* NOTE: With the current algorithm this happens
* only for A=0 and means that the min. divisor
* (respectively: the max. baudrate) is reached.
* Apparently the formula for higher speeds is:
* baudrate = 12M * 32 / (2^buf[1]) / buf[0]
*/
B = 16; /* => 24 MBaud */
/* Encode the baud rate */
buf[3] = 0x80; /* Select divisor encoding method */
unsigned tmp = 12000000 * 32 / baud;
buf[3] = 0x80;
buf[2] = 0;
buf[1] = (A & 0x0e); /* A */
buf[1] |= ((B & 0x100) >> 8); /* MSB of B */
buf[0] = B & 0xff; /* 8 LSBs of B */
/* Calculate the actual/resulting baud rate */
if (B <= 8)
B = 512;
baud = 12000000 * 32 / ((1 << A) * B);
return baud;
}
static void pl2303_encode_baudrate(struct tty_struct *tty,
struct usb_serial_port *port,
enum pl2303_type type,
u8 buf[4])
{
int baud;
buf[1] = (tmp >= 256);
while (tmp >= 256) {
tmp >>= 2;
buf[1] <<= 1;
}
buf[0] = tmp;
}
baud = tty_get_baud_rate(tty);
dev_dbg(&port->dev, "baud requested = %d\n", baud);
if (!baud)
return;
/*
* There are two methods for setting/encoding the baud rate
* 1) Direct method: encodes the baud rate value directly
* => supported by all chip types
* 2) Divisor based method: encodes a divisor to a base value (12MHz*32)
* => not supported by HX clones (and likely type_0/1 chips)
*
* NOTE: Although the divisor based baud rate encoding method is much
* more flexible, some of the standard baud rate values can not be
* realized exactly. But the difference is very small (max. 0.2%) and
* the device likely uses the same baud rate generator for both methods
* so that there is likley no difference.
*/
if (type == type_0 || type == type_1 || type == HX_CLONE)
baud = pl2303_baudrate_encode_direct(baud, type, buf);
else
baud = pl2303_baudrate_encode_divisor(baud, type, buf);
/* Save resulting baud rate */
tty_encode_baud_rate(tty, baud, baud);
dev_dbg(&port->dev, "baud set = %d\n", baud);
......@@ -540,8 +379,8 @@ static void pl2303_set_termios(struct tty_struct *tty,
dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
}
/* For reference: buf[0]:buf[3] baud rate value */
pl2303_encode_baudrate(tty, port, spriv->type, buf);
/* For reference buf[0]:buf[3] baud rate value */
pl2303_encode_baudrate(tty, port, &buf[0]);
/* For reference buf[4]=0 is 1 stop bits */
/* For reference buf[4]=1 is 1.5 stop bits */
......@@ -618,10 +457,10 @@ static void pl2303_set_termios(struct tty_struct *tty,
dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf);
if (C_CRTSCTS(tty)) {
if (spriv->type == type_0 || spriv->type == type_1)
pl2303_vendor_write(0x0, 0x41, serial);
else
if (spriv->type == HX)
pl2303_vendor_write(0x0, 0x61, serial);
else
pl2303_vendor_write(0x0, 0x41, serial);
} else {
pl2303_vendor_write(0x0, 0x0, serial);
}
......@@ -658,7 +497,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int result;
if (spriv->type == type_0 || spriv->type == type_1) {
if (spriv->type != HX) {
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
} else {
......@@ -833,7 +672,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
/* NOTE: HX clones don't support sending breaks, -EPIPE is returned */
if (result)
dev_err(&port->dev, "error sending break = %d\n", result);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7