Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...

Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt

@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt7622-audsys", "syscon"
 	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
 	- "mediatek,mt8183-audiosys", "syscon"
+	- "mediatek,mt8516-audsys", "syscon"
 - #clock-cells: Must be 1
 
 The AUDSYS controller uses the common clk binding from

Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Clock Control Unit Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-ccu
+      - allwinner,sun5i-a10s-ccu
+      - allwinner,sun5i-a13-ccu
+      - allwinner,sun6i-a31-ccu
+      - allwinner,sun7i-a20-ccu
+      - allwinner,sun8i-a23-ccu
+      - allwinner,sun8i-a33-ccu
+      - allwinner,sun8i-a83t-ccu
+      - allwinner,sun8i-a83t-r-ccu
+      - allwinner,sun8i-h3-ccu
+      - allwinner,sun8i-h3-r-ccu
+      - allwinner,sun8i-r40-ccu
+      - allwinner,sun8i-v3s-ccu
+      - allwinner,sun9i-a80-ccu
+      - allwinner,sun50i-a64-ccu
+      - allwinner,sun50i-a64-r-ccu
+      - allwinner,sun50i-h5-ccu
+      - allwinner,sun50i-h6-ccu
+      - allwinner,sun50i-h6-r-ccu
+      - allwinner,suniv-f1c100s-ccu
+      - nextthing,gr8-ccu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+    items:
+      - description: High Frequency Oscillator (usually at 24MHz)
+      - description: Low Frequency Oscillator (usually at 32kHz)
+      - description: Internal Oscillator
+      - description: Peripherals PLL
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      - const: hosc
+      - const: losc
+      - const: iosc
+      - const: pll-periph
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      enum:
+        - allwinner,sun8i-a83t-r-ccu
+        - allwinner,sun8i-h3-r-ccu
+        - allwinner,sun50i-a64-r-ccu
+        - allwinner,sun50i-h6-r-ccu
+
+then:
+  properties:
+    clocks:
+      minItems: 4
+      maxItems: 4
+
+    clock-names:
+      minItems: 4
+      maxItems: 4
+
+else:
+  if:
+    properties:
+      compatible:
+        const: allwinner,sun50i-h6-ccu
+
+  then:
+    properties:
+      clocks:
+        minItems: 3
+        maxItems: 3
+
+      clock-names:
+        minItems: 3
+        maxItems: 3
+
+  else:
+    properties:
+      clocks:
+        minItems: 2
+        maxItems: 2
+
+      clock-names:
+        minItems: 2
+        maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    ccu: clock@1c20000 {
+        compatible = "allwinner,sun8i-h3-ccu";
+        reg = <0x01c20000 0x400>;
+        clocks = <&osc24M>, <&osc32k>;
+        clock-names = "hosc", "losc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+  - |
+    r_ccu: clock@1f01400 {
+        compatible = "allwinner,sun50i-a64-r-ccu";
+        reg = <0x01f01400 0x100>;
+        clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu 11>;
+        clock-names = "hosc", "losc", "iosc", "pll-periph";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...

Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt

@@ -10,6 +10,7 @@ Required Properties:
 		"amlogic,gxl-clkc" for GXL and GXM SoC,
 		"amlogic,axg-clkc" for AXG SoC.
 		"amlogic,g12a-clkc" for G12A SoC.
+		"amlogic,g12b-clkc" for G12B SoC.
 - clocks : list of clock phandle, one for each entry clock-names.
 - clock-names : should contain the following:
   * "xtal": the platform xtal

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -9,10 +9,11 @@ Slow Clock controller:
 Required properties:
 - compatible : shall be one of the following:
 	"atmel,at91sam9x5-sckc",
-	"atmel,sama5d3-sckc" or
-	"atmel,sama5d4-sckc":
+	"atmel,sama5d3-sckc",
+	"atmel,sama5d4-sckc" or
+	"microchip,sam9x60-sckc":
 		at91 SCKC (Slow Clock Controller)
-- #clock-cells : shall be 0.
+- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0.
 - clocks : shall be the input parent clock phandle for the clock.
 
 Optional properties:

Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt

+Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
+
+Required properties:
+- compatible: must be one of:
+	 "brcm,bcm3368-clocks"
+	 "brcm,bcm6328-clocks"
+	 "brcm,bcm6358-clocks"
+	 "brcm,bcm6362-clocks"
+	 "brcm,bcm6368-clocks"
+	 "brcm,bcm63268-clocks"
+
+- reg: Address and length of the register set
+- #clock-cells: must be <1>
+
+
+Example:
+
+clkctl: clock-controller@10000004 {
+	compatible = "brcm,bcm6328-clocks";
+	reg = <0x10000004 0x4>;
+	#clock-cells = <1>;
+};

Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt

@@ -40,6 +40,7 @@ Optional properties:
        input audio clocks from host system.
      - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
        external connector.
+     - ln-spdif-mclk : Optional input audio clock from SPDIF.
      - ln-spdif-clkout : Optional input audio clock from SPDIF.
      - ln-adat-mclk : Optional input audio clock from ADAT.
      - ln-pmic-32k : On board fixed clock.

Documentation/devicetree/bindings/clock/mvebu-core-clock.txt

@@ -59,6 +59,7 @@ Required properties:
 	"marvell,dove-core-clock" - for Dove SoC core clocks
 	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
 	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+	"marvell,mv98dx1135-core-clock" - for Kirkwood 98dx1135 SoC
 	"marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC
 	"marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC
 	"marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC

Documentation/devicetree/bindings/clock/qcom,gpucc.txt

@@ -2,13 +2,15 @@ Qualcomm Graphics Clock & Reset Controller Binding
 --------------------------------------------------
 
 Required properties :
-- compatible : shall contain "qcom,sdm845-gpucc"
+- compatible : shall contain "qcom,sdm845-gpucc" or "qcom,msm8998-gpucc"
 - reg : shall contain base register location and length
 - #clock-cells : from common clock binding, shall contain 1
 - #reset-cells : from common reset binding, shall contain 1
 - #power-domain-cells : from generic power domain binding, shall contain 1
 - clocks : shall contain the XO clock
+	   shall contain the gpll0 out main clock (msm8998)
 - clock-names : shall be "xo"
+		shall be "gpll0" (msm8998)
 
 Example:
 	gpucc: clock-controller@5090000 {

Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt

@@ -13,6 +13,7 @@ Required Properties:
 	- external (optional) RGMII_REFCLK
   - clock-names: Must be:
         clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+  - #power-domain-cells: Must be 0
 
 Examples
 --------
@@ -27,6 +28,7 @@ Examples
 		clocks = <&ext_mclk>, <&ext_rtc_clk>,
 				<&ext_jtag_clk>, <&ext_rgmii_ref>;
 		clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+		#power-domain-cells = <0>;
 	};
 
   - Other nodes can use the clocks provided by SYSCTRL as in:
@@ -38,6 +40,7 @@ Examples
 		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
-		clocks = <&sysctrl R9A06G032_CLK_UART0>;
-		clock-names = "baudclk";
+		clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		power-domains = <&sysctrl>;
 	};

Documentation/devicetree/bindings/clock/silabs,si5341.txt

+Binding for Silicon Labs Si5341 and Si5340 programmable i2c clock generator.
+
+Reference
+[1] Si5341 Data Sheet
+    https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf
+[2] Si5341 Reference Manual
+    https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf
+
+The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output
+clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which
+in turn can be directed to any of the 10 (or 4) outputs through a divider.
+The internal structure of the clock generators can be found in [2].
+
+The driver can be used in "as is" mode, reading the current settings from the
+chip at boot, in case you have a (pre-)programmed device. If the PLL is not
+configured when the driver probes, it assumes the driver must fully initialize
+it.
+
+The device type, speed grade and revision are determined runtime by probing.
+
+The driver currently only supports XTAL input mode, and does not support any
+fancy input configurations. They can still be programmed into the chip and
+the driver will leave them "as is".
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of the following:
+	"silabs,si5340" - Si5340 A/B/C/D
+	"silabs,si5341" - Si5341 A/B/C/D
+- reg: i2c device address, usually 0x74
+- #clock-cells: from common clock binding; shall be set to 2.
+	The first value is "0" for outputs, "1" for synthesizers.
+	The second value is the output or synthesizer index.
+- clocks: from common clock binding; list of parent clock  handles,
+	corresponding to inputs. Use a fixed clock for the "xtal" input.
+	At least one must be present.
+- clock-names: One of: "xtal", "in0", "in1", "in2"
+- vdd-supply: Regulator node for VDD
+
+Optional properties:
+- vdda-supply: Regulator node for VDDA
+- vdds-supply: Regulator node for VDDS
+- silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL
+  feedback divider. Must be such that the PLL output is in the valid range. For
+  example, to create 14GHz from a 48MHz xtal, use m-num=14000 and m-den=48. Only
+  the fraction matters, using 3500 and 12 will deliver the exact same result.
+  If these are not specified, and the PLL is not yet programmed when the driver
+  probes, the PLL will be set to 14GHz.
+- silabs,reprogram: When present, the driver will always assume the device must
+  be initialized, and always performs the soft-reset routine. Since this will
+  temporarily stop all output clocks, don't do this if the chip is generating
+  the CPU clock for example.
+- interrupts: Interrupt for INTRb pin.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+
+== Child nodes: Outputs ==
+
+The child nodes list the output clocks.
+
+Each of the clock outputs can be overwritten individually by using a child node.
+If a child node for a clock output is not set, the configuration remains
+unchanged.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- vdd-supply: Regulator node for VDD for this output. The driver selects default
+	values for common-mode and amplitude based on the voltage.
+- silabs,format: Output format, one of:
+	1 = differential (defaults to LVDS levels)
+	2 = low-power (defaults to HCSL levels)
+	4 = LVCMOS
+- silabs,common-mode: Manually override output common mode, see [2] for values
+- silabs,amplitude: Manually override output amplitude, see [2] for values
+- silabs,synth-master: boolean. If present, this output is allowed to change the
+	multisynth frequency dynamically.
+- silabs,silabs,disable-high: boolean. If set, the clock output is driven HIGH
+	when disabled, otherwise it's driven LOW.
+
+==Example==
+
+/* 48MHz reference crystal */
+ref48: ref48M {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <48000000>;
+};
+
+i2c-master-node {
+	/* Programmable clock (for logic) */
+	si5341: clock-generator@74 {
+		reg = <0x74>;
+		compatible = "silabs,si5341";
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&ref48>;
+		clock-names = "xtal";
+
+		silabs,pll-m-num = <14000>; /* PLL at 14.0 GHz */
+		silabs,pll-m-den = <48>;
+		silabs,reprogram; /* Chips are not programmed, always reset */
+
+		out@0 {
+			reg = <0>;
+			silabs,format = <1>; /* LVDS 3v3 */
+			silabs,common-mode = <3>;
+			silabs,amplitude = <3>;
+			silabs,synth-master;
+		};
+
+		/*
+		 * Output 6 configuration:
+		 *  LVDS 1v8
+		 */
+		out@6 {
+			reg = <6>;
+			silabs,format = <1>; /* LVDS 1v8 */
+			silabs,common-mode = <13>;
+			silabs,amplitude = <3>;
+		};
+
+		/*
+		 * Output 8 configuration:
+		 *  HCSL 3v3
+		 */
+		out@8 {
+			reg = <8>;
+			silabs,format = <2>;
+			silabs,common-mode = <11>;
+			silabs,amplitude = <3>;
+		};
+	};
+};
+
+some-video-node {
+	/* Standard clock bindings */
+	clock-names = "pixel";
+	clocks = <&si5341 0 7>; /* Output 7 */
+
+	/* Set output 7 to use syntesizer 3 as its parent */
+	assigned-clocks = <&si5341 0 7>, <&si5341 1 3>;
+	assigned-clock-parents = <&si5341 1 3>;
+	/* Set output 7 to 148.5 MHz using a synth frequency of 594 MHz */
+	assigned-clock-rates = <148500000>, <594000000>;
+};
+
+some-audio-node {
+	clock-names = "i2s-clk";
+	clocks = <&si5341 0 0>;
+	/*
+	 * since output 0 is a synth-master, the synth will be automatically set
+	 * to an appropriate frequency when the audio driver requests another
+	 * frequency. We give control over synth 2 to this output here.
+	 */
+	assigned-clocks = <&si5341 0 0>;
+	assigned-clock-parents = <&si5341 1 2>;
+};

Documentation/devicetree/bindings/clock/sunxi-ccu.txt

-Allwinner Clock Control Unit Binding
-------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
-		- "allwinner,sun4i-a10-ccu"
-		- "allwinner,sun5i-a10s-ccu"
-		- "allwinner,sun5i-a13-ccu"
-		- "allwinner,sun6i-a31-ccu"
-		- "allwinner,sun7i-a20-ccu"
-		- "allwinner,sun8i-a23-ccu"
-		- "allwinner,sun8i-a33-ccu"
-		- "allwinner,sun8i-a83t-ccu"
-		- "allwinner,sun8i-a83t-r-ccu"
-		- "allwinner,sun8i-h3-ccu"
-		- "allwinner,sun8i-h3-r-ccu"
-+		- "allwinner,sun8i-r40-ccu"
-		- "allwinner,sun8i-v3s-ccu"
-		- "allwinner,sun9i-a80-ccu"
-		- "allwinner,sun50i-a64-ccu"
-		- "allwinner,sun50i-a64-r-ccu"
-		- "allwinner,sun50i-h5-ccu"
-		- "allwinner,sun50i-h6-ccu"
-		- "allwinner,sun50i-h6-r-ccu"
-		- "allwinner,suniv-f1c100s-ccu"
-		- "nextthing,gr8-ccu"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the oscillators feeding the CCU. Two are needed:
-  - "hosc": the high frequency oscillator (usually at 24MHz)
-  - "losc": the low frequency oscillator (usually at 32kHz)
-	    On the A83T, this is the internal 16MHz oscillator divided by 512
-- clock-names: Must contain the clock names described just above
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-For the main CCU on H6, one more clock is needed:
-- "iosc": the SoC's internal frequency oscillator
-
-For the PRCM CCUs on A83T/H3/A64/H6, two more clocks are needed:
-- "pll-periph": the SoC's peripheral PLL from the main CCU
-- "iosc": the SoC's internal frequency oscillator
-
-Example for generic CCU:
-ccu: clock@1c20000 {
-	compatible = "allwinner,sun8i-h3-ccu";
-	reg = <0x01c20000 0x400>;
-	clocks = <&osc24M>, <&osc32k>;
-	clock-names = "hosc", "losc";
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
-
-Example for PRCM CCU:
-r_ccu: clock@1f01400 {
-	compatible = "allwinner,sun50i-a64-r-ccu";
-	reg = <0x01f01400 0x100>;
-	clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>;
-	clock-names = "hosc", "losc", "iosc", "pll-periph";
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};

Documentation/driver-api/driver-model/devres.rst

@@ -246,6 +246,10 @@ CLOCK
   devm_clk_get()
   devm_clk_get_optional()
   devm_clk_put()
+  devm_clk_bulk_get()
+  devm_clk_bulk_get_all()
+  devm_clk_bulk_get_optional()
+  devm_get_clk_from_childl()
   devm_clk_hw_register()
   devm_of_clk_add_hw_provider()
   devm_clk_hw_register_clkdev()

arch/mips/include/asm/mach-jz4740/clock.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#ifndef __ASM_JZ4740_CLOCK_H__
-#define __ASM_JZ4740_CLOCK_H__
-
-enum jz4740_wait_mode {
-	JZ4740_WAIT_MODE_IDLE,
-	JZ4740_WAIT_MODE_SLEEP,
-};
-
-void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode);
-
-void jz4740_clock_suspend(void);
-void jz4740_clock_resume(void);
-
-void jz4740_clock_udc_enable_auto_suspend(void);
-void jz4740_clock_udc_disable_auto_suspend(void);
-
-#endif

arch/mips/jz4740/board-qi_lb60.c

@@ -37,8 +37,6 @@
 
 #include <asm/mach-jz4740/platform.h>
 
-#include "clock.h"
-
 /* GPIOs */
 #define QI_LB60_GPIO_KEYOUT(x)		(JZ_GPIO_PORTC(10) + (x))
 #define QI_LB60_GPIO_KEYIN(x)		(JZ_GPIO_PORTD(18) + (x))

arch/mips/jz4740/platform.c

@@ -21,8 +21,6 @@
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 
-#include "clock.h"
-
 /* USB Device Controller */
 struct platform_device jz4740_udc_xceiv_device = {
 	.name = "usb_phy_generic",

arch/mips/jz4740/pm.c

@@ -9,21 +9,13 @@
 #include <linux/delay.h>
 #include <linux/suspend.h>
 
-#include <asm/mach-jz4740/clock.h>
-
 static int jz4740_pm_enter(suspend_state_t state)
 {
-	jz4740_clock_suspend();
-
-	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP);
-
 	__asm__(".set\tmips3\n\t"
 		"wait\n\t"
 		".set\tmips0");
 
-	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE);
 
-	jz4740_clock_resume();
 
 	return 0;
 }

arch/mips/jz4740/time.c

@@ -13,13 +13,10 @@
 #include <linux/clockchips.h>
 #include <linux/sched_clock.h>
 
-#include <asm/mach-jz4740/clock.h>
 #include <asm/mach-jz4740/irq.h>
 #include <asm/mach-jz4740/timer.h>
 #include <asm/time.h>
 
-#include "clock.h"
-
 #define TIMER_CLOCKEVENT 0
 #define TIMER_CLOCKSOURCE 1
 

drivers/clk/Kconfig

@@ -90,6 +90,17 @@ config COMMON_CLK_SCPI
 	  This driver uses SCPI Message Protocol to interact with the
 	  firmware providing all the clock controls.
 
+config COMMON_CLK_SI5341
+	tristate "Clock driver for SiLabs 5341 and 5340 A/B/C/D devices"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports Silicon Labs Si5341 and Si5340 programmable clock
+	  generators. Not all features of these chips are currently supported
+	  by the driver, in particular it only supports XTAL input. The chip can
+	  be pre-programmed to support other configurations and features not yet
+	  implemented in the driver.
+
 config COMMON_CLK_SI5351
 	tristate "Clock driver for SiLabs 5351A/B/C"
 	depends on I2C
@@ -214,7 +225,7 @@ config CLK_QORIQ
 
 config COMMON_CLK_XGENE
 	bool "Clock driver for APM XGene SoC"
-	default y
+	default ARCH_XGENE
 	depends on ARM64 || COMPILE_TEST
 	---help---
 	  Sypport for the APM X-Gene SoC reference, PLL, and device clocks.

drivers/clk/Makefile

@@ -49,6 +49,7 @@ obj-$(CONFIG_COMMON_CLK_HI655X)		+= clk-hi655x.o
 obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
 obj-$(CONFIG_COMMON_CLK_SCMI)           += clk-scmi.o
 obj-$(CONFIG_COMMON_CLK_SCPI)           += clk-scpi.o
+obj-$(CONFIG_COMMON_CLK_SI5341)		+= clk-si5341.o
 obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
 obj-$(CONFIG_COMMON_CLK_SI514)		+= clk-si514.o
 obj-$(CONFIG_COMMON_CLK_SI544)		+= clk-si544.o

drivers/clk/bcm/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
+config CLK_BCM2835
+	bool "Broadcom BCM2835 clock support"
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on COMMON_CLK
+	default ARCH_BCM2835 || ARCH_BRCMSTB
+	help
+	  Enable common clock framework support for Broadcom BCM2835
+	  SoCs.
+
 config CLK_BCM_63XX
 	bool "Broadcom BCM63xx clock support"
 	depends on ARCH_BCM_63XX || COMPILE_TEST
@@ -8,6 +17,14 @@ config CLK_BCM_63XX
 	  Enable common clock framework support for Broadcom BCM63xx DSL SoCs
 	  based on the ARM architecture
 
+config CLK_BCM_63XX_GATE
+	bool "Broadcom BCM63xx gated clock support"
+	depends on BMIPS_GENERIC || COMPILE_TEST
+	default BMIPS_GENERIC
+	help
+	  Enable common clock framework support for Broadcom BCM63xx DSL SoCs
+	  based on the MIPS architecture
+
 config CLK_BCM_KONA
 	bool "Broadcom Kona CCU clock support"
 	depends on ARCH_BCM_MOBILE || COMPILE_TEST
@@ -64,3 +81,10 @@ config CLK_BCM_SR
 	default ARCH_BCM_IPROC
 	help
 	  Enable common clock framework support for the Broadcom Stingray SoC
+
+config CLK_RASPBERRYPI
+	tristate "Raspberry Pi firmware based clock support"
+	depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
+	help
+	  Enable common clock framework support for Raspberry Pi's firmware
+	  dependent clocks

drivers/clk/bcm/Makefile

 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_CLK_BCM_63XX)	+= clk-bcm63xx.o
+obj-$(CONFIG_CLK_BCM_63XX_GATE)	+= clk-bcm63xx-gate.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
 obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
-obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
-obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835-aux.o
+obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2835.o
+obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2835-aux.o
+obj-$(CONFIG_CLK_RASPBERRYPI)	+= clk-raspberrypi.o
 obj-$(CONFIG_ARCH_BCM_53573)	+= clk-bcm53573-ilp.o
 obj-$(CONFIG_CLK_BCM_CYGNUS)	+= clk-cygnus.o
 obj-$(CONFIG_CLK_BCM_HR2)	+= clk-hr2.o

drivers/clk/bcm/clk-bcm2835.c

@@ -1651,30 +1651,10 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
 		.fixed_divider = 1,
 		.flags = CLK_SET_RATE_PARENT),
 
-	/* PLLB is used for the ARM's clock. */
-	[BCM2835_PLLB]		= REGISTER_PLL(
-		.name = "pllb",
-		.cm_ctrl_reg = CM_PLLB,
-		.a2w_ctrl_reg = A2W_PLLB_CTRL,
-		.frac_reg = A2W_PLLB_FRAC,
-		.ana_reg_base = A2W_PLLB_ANA0,
-		.reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
-		.lock_mask = CM_LOCK_FLOCKB,
-
-		.ana = &bcm2835_ana_default,
-
-		.min_rate = 600000000u,
-		.max_rate = 3000000000u,
-		.max_fb_rate = BCM2835_MAX_FB_RATE),
-	[BCM2835_PLLB_ARM]	= REGISTER_PLL_DIV(
-		.name = "pllb_arm",
-		.source_pll = "pllb",
-		.cm_reg = CM_PLLB,
-		.a2w_reg = A2W_PLLB_ARM,
-		.load_mask = CM_PLLB_LOADARM,
-		.hold_mask = CM_PLLB_HOLDARM,
-		.fixed_divider = 1,
-		.flags = CLK_SET_RATE_PARENT),
+	/*
+	 * PLLB is used for the ARM's clock. Controlled by firmware, see
+	 * clk-raspberrypi.c.
+	 */
 
 	/*
 	 * PLLC is the core PLL, used to drive the core VPU clock.

drivers/clk/bcm/clk-bcm63xx-gate.c

+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+struct clk_bcm63xx_table_entry {
+	const char * const name;
+	u8 bit;
+	unsigned long flags;
+};
+
+struct clk_bcm63xx_hw {
+	void __iomem *regs;
+	spinlock_t lock;
+
+	struct clk_hw_onecell_data data;
+};
+
+static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = {
+	{ .name = "mac", .bit = 3, },
+	{ .name = "tc", .bit = 5, },
+	{ .name = "us_top", .bit = 6, },
+	{ .name = "ds_top", .bit = 7, },
+	{ .name = "acm", .bit = 8, },
+	{ .name = "spi", .bit = 9, },
+	{ .name = "usbs", .bit = 10, },
+	{ .name = "bmu", .bit = 11, },
+	{ .name = "pcm", .bit = 12, },
+	{ .name = "ntp", .bit = 13, },
+	{ .name = "acp_b", .bit = 14, },
+	{ .name = "acp_a", .bit = 15, },
+	{ .name = "emusb", .bit = 17, },
+	{ .name = "enet0", .bit = 18, },
+	{ .name = "enet1", .bit = 19, },
+	{ .name = "usbsu", .bit = 20, },
+	{ .name = "ephy", .bit = 21, },
+	{ },
+};
+
+static const struct clk_bcm63xx_table_entry bcm6328_clocks[] = {
+	{ .name = "phy_mips", .bit = 0, },
+	{ .name = "adsl_qproc", .bit = 1, },
+	{ .name = "adsl_afe", .bit = 2, },
+	{ .name = "adsl", .bit = 3, },
+	{ .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, },
+	{ .name = "sar", .bit = 5, },
+	{ .name = "pcm", .bit = 6, },
+	{ .name = "usbd", .bit = 7, },
+	{ .name = "usbh", .bit = 8, },
+	{ .name = "hsspi", .bit = 9, },
+	{ .name = "pcie", .bit = 10, },
+	{ .name = "robosw", .bit = 11, },
+	{ },
+};
+
+static const struct clk_bcm63xx_table_entry bcm6358_clocks[] = {
+	{ .name = "enet", .bit = 4, },
+	{ .name = "adslphy", .bit = 5, },
+	{ .name = "pcm", .bit = 8, },
+	{ .name = "spi", .bit = 9, },
+	{ .name = "usbs", .bit = 10, },
+	{ .name = "sar", .bit = 11, },
+	{ .name = "emusb", .bit = 17, },
+	{ .name = "enet0", .bit = 18, },
+	{ .name = "enet1", .bit = 19, },
+	{ .name = "usbsu", .bit = 20, },
+	{ .name = "ephy", .bit = 21, },
+	{ },
+};
+
+static const struct clk_bcm63xx_table_entry bcm6362_clocks[] = {
+	{ .name = "adsl_qproc", .bit = 1, },
+	{ .name = "adsl_afe", .bit = 2, },
+	{ .name = "adsl", .bit = 3, },
+	{ .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, },
+	{ .name = "wlan_ocp", .bit = 5, },
+	{ .name = "swpkt_usb", .bit = 7, },
+	{ .name = "swpkt_sar", .bit = 8, },
+	{ .name = "sar", .bit = 9, },
+	{ .name = "robosw", .bit = 10, },
+	{ .name = "pcm", .bit = 11, },
+	{ .name = "usbd", .bit = 12, },
+	{ .name = "usbh", .bit = 13, },
+	{ .name = "ipsec", .bit = 14, },
+	{ .name = "spi", .bit = 15, },
+	{ .name = "hsspi", .bit = 16, },
+	{ .name = "pcie", .bit = 17, },
+	{ .name = "fap", .bit = 18, },
+	{ .name = "phymips", .bit = 19, },
+	{ .name = "nand", .bit = 20, },
+	{ },
+};
+
+static const struct clk_bcm63xx_table_entry bcm6368_clocks[] = {
+	{ .name = "vdsl_qproc", .bit = 2, },
+	{ .name = "vdsl_afe", .bit = 3, },
+	{ .name = "vdsl_bonding", .bit = 4, },
+	{ .name = "vdsl", .bit = 5, },
+	{ .name = "phymips", .bit = 6, },
+	{ .name = "swpkt_usb", .bit = 7, },
+	{ .name = "swpkt_sar", .bit = 8, },
+	{ .name = "spi", .bit = 9, },
+	{ .name = "usbd", .bit = 10, },
+	{ .name = "sar", .bit = 11, },
+	{ .name = "robosw", .bit = 12, },
+	{ .name = "utopia", .bit = 13, },
+	{ .name = "pcm", .bit = 14, },
+	{ .name = "usbh", .bit = 15, },
+	{ .name = "disable_gless", .bit = 16, },
+	{ .name = "nand", .bit = 17, },
+	{ .name = "ipsec", .bit = 18, },
+	{ },
+};
+
+static const struct clk_bcm63xx_table_entry bcm63268_clocks[] = {
+	{ .name = "disable_gless", .bit = 0, },
+	{ .name = "vdsl_qproc", .bit = 1, },
+	{ .name = "vdsl_afe", .bit = 2, },
+	{ .name = "vdsl", .bit = 3, },
+	{ .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, },
+	{ .name = "wlan_ocp", .bit = 5, },
+	{ .name = "dect", .bit = 6, },
+	{ .name = "fap0", .bit = 7, },
+	{ .name = "fap1", .bit = 8, },
+	{ .name = "sar", .bit = 9, },
+	{ .name = "robosw", .bit = 10, },
+	{ .name = "pcm", .bit = 11, },
+	{ .name = "usbd", .bit = 12, },
+	{ .name = "usbh", .bit = 13, },
+	{ .name = "ipsec", .bit = 14, },
+	{ .name = "spi", .bit = 15, },
+	{ .name = "hsspi", .bit = 16, },
+	{ .name = "pcie", .bit = 17, },
+	{ .name = "phymips", .bit = 18, },
+	{ .name = "gmac", .bit = 19, },
+	{ .name = "nand", .bit = 20, },
+	{ .name = "tbus", .bit = 27, },
+	{ .name = "robosw250", .bit = 31, },
+	{ },
+};
+
+static int clk_bcm63xx_probe(struct platform_device *pdev)
+{
+	const struct clk_bcm63xx_table_entry *entry, *table;
+	struct clk_bcm63xx_hw *hw;
+	struct resource *r;
+	u8 maxbit = 0;
+	int i, ret;
+
+	table = of_device_get_match_data(&pdev->dev);
+	if (!table)
+		return -EINVAL;
+
+	for (entry = table; entry->name; entry++)
+		maxbit = max_t(u8, maxbit, entry->bit);
+
+	hw = devm_kzalloc(&pdev->dev, struct_size(hw, data.hws, maxbit),
+			  GFP_KERNEL);
+	if (!hw)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, hw);
+
+	spin_lock_init(&hw->lock);
+
+	hw->data.num = maxbit;
+	for (i = 0; i < maxbit; i++)
+		hw->data.hws[i] = ERR_PTR(-ENODEV);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hw->regs = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(hw->regs))
+		return PTR_ERR(hw->regs);
+
+	for (entry = table; entry->name; entry++) {
+		struct clk_hw *clk;
+
+		clk = clk_hw_register_gate(&pdev->dev, entry->name, NULL,
+					   entry->flags, hw->regs, entry->bit,
+					   CLK_GATE_BIG_ENDIAN, &hw->lock);
+		if (IS_ERR(clk)) {
+			ret = PTR_ERR(clk);
+			goto out_err;
+		}
+
+		hw->data.hws[entry->bit] = clk;
+	}
+
+	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+				     &hw->data);
+	if (!ret)
+		return 0;
+out_err:
+	for (i = 0; i < hw->data.num; i++) {
+		if (!IS_ERR(hw->data.hws[i]))
+			clk_hw_unregister_gate(hw->data.hws[i]);
+	}
+
+	return ret;
+}
+
+static int clk_bcm63xx_remove(struct platform_device *pdev)
+{
+	struct clk_bcm63xx_hw *hw = platform_get_drvdata(pdev);
+	int i;
+
+	of_clk_del_provider(pdev->dev.of_node);
+
+	for (i = 0; i < hw->data.num; i++) {
+		if (!IS_ERR(hw->data.hws[i]))
+			clk_hw_unregister_gate(hw->data.hws[i]);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id clk_bcm63xx_dt_ids[] = {
+	{ .compatible = "brcm,bcm3368-clocks", .data = &bcm3368_clocks, },
+	{ .compatible = "brcm,bcm6328-clocks", .data = &bcm6328_clocks, },
+	{ .compatible = "brcm,bcm6358-clocks", .data = &bcm6358_clocks, },
+	{ .compatible = "brcm,bcm6362-clocks", .data = &bcm6362_clocks, },
+	{ .compatible = "brcm,bcm6368-clocks", .data = &bcm6368_clocks, },
+	{ .compatible = "brcm,bcm63268-clocks", .data = &bcm63268_clocks, },
+	{ }
+};
+
+static struct platform_driver clk_bcm63xx = {
+	.probe = clk_bcm63xx_probe,
+	.remove = clk_bcm63xx_remove,
+	.driver = {
+		.name = "bcm63xx-clock",
+		.of_match_table = clk_bcm63xx_dt_ids,
+	},
+};
+builtin_platform_driver(clk_bcm63xx);

drivers/clk/bcm/clk-raspberrypi.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Raspberry Pi driver for firmware controlled clocks
+ *
+ * Even though clk-bcm2835 provides an interface to the hardware registers for
+ * the system clocks we've had to factor out 'pllb' as the firmware 'owns' it.
+ * We're not allowed to change it directly as we might race with the
+ * over-temperature and under-voltage protections provided by the firmware.
+ *
+ * Copyright (C) 2019 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+#define RPI_FIRMWARE_ARM_CLK_ID		0x00000003
+
+#define RPI_FIRMWARE_STATE_ENABLE_BIT	BIT(0)
+#define RPI_FIRMWARE_STATE_WAIT_BIT	BIT(1)
+
+/*
+ * Even though the firmware interface alters 'pllb' the frequencies are
+ * provided as per 'pllb_arm'. We need to scale before passing them trough.
+ */
+#define RPI_FIRMWARE_PLLB_ARM_DIV_RATE	2
+
+#define A2W_PLL_FRAC_BITS		20
+
+struct raspberrypi_clk {
+	struct device *dev;
+	struct rpi_firmware *firmware;
+	struct platform_device *cpufreq;
+
+	unsigned long min_rate;
+	unsigned long max_rate;
+
+	struct clk_hw pllb;
+	struct clk_hw *pllb_arm;
+	struct clk_lookup *pllb_arm_lookup;
+};
+
+/*
+ * Structure of the message passed to Raspberry Pi's firmware in order to
+ * change clock rates. The 'disable_turbo' option is only available to the ARM
+ * clock (pllb) which we enable by default as turbo mode will alter multiple
+ * clocks at once.
+ *
+ * Even though we're able to access the clock registers directly we're bound to
+ * use the firmware interface as the firmware ultimately takes care of
+ * mitigating overheating/undervoltage situations and we would be changing
+ * frequencies behind his back.
+ *
+ * For more information on the firmware interface check:
+ * https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface
+ */
+struct raspberrypi_firmware_prop {
+	__le32 id;
+	__le32 val;
+	__le32 disable_turbo;
+} __packed;
+
+static int raspberrypi_clock_property(struct rpi_firmware *firmware, u32 tag,
+				      u32 clk, u32 *val)
+{
+	struct raspberrypi_firmware_prop msg = {
+		.id = cpu_to_le32(clk),
+		.val = cpu_to_le32(*val),
+		.disable_turbo = cpu_to_le32(1),
+	};
+	int ret;
+
+	ret = rpi_firmware_property(firmware, tag, &msg, sizeof(msg));
+	if (ret)
+		return ret;
+
+	*val = le32_to_cpu(msg.val);
+
+	return 0;
+}
+
+static int raspberrypi_fw_pll_is_on(struct clk_hw *hw)
+{
+	struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
+						   pllb);
+	u32 val = 0;
+	int ret;
+
+	ret = raspberrypi_clock_property(rpi->firmware,
+					 RPI_FIRMWARE_GET_CLOCK_STATE,
+					 RPI_FIRMWARE_ARM_CLK_ID, &val);
+	if (ret)
+		return 0;
+
+	return !!(val & RPI_FIRMWARE_STATE_ENABLE_BIT);
+}
+
+
+static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
+						   pllb);
+	u32 val = 0;
+	int ret;
+
+	ret = raspberrypi_clock_property(rpi->firmware,
+					 RPI_FIRMWARE_GET_CLOCK_RATE,
+					 RPI_FIRMWARE_ARM_CLK_ID,
+					 &val);
+	if (ret)
+		return ret;
+
+	return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+}
+
+static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long parent_rate)
+{
+	struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
+						   pllb);
+	u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+	int ret;
+
+	ret = raspberrypi_clock_property(rpi->firmware,
+					 RPI_FIRMWARE_SET_CLOCK_RATE,
+					 RPI_FIRMWARE_ARM_CLK_ID,
+					 &new_rate);
+	if (ret)
+		dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d",
+				    clk_hw_get_name(hw), ret);
+
+	return ret;
+}
+
+/*
+ * Sadly there is no firmware rate rounding interface. We borrowed it from
+ * clk-bcm2835.
+ */
+static int raspberrypi_pll_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
+{
+	struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk,
+						   pllb);
+	u64 div, final_rate;
+	u32 ndiv, fdiv;
+
+	/* We can't use req->rate directly as it would overflow */
+	final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate);
+
+	div = (u64)final_rate << A2W_PLL_FRAC_BITS;
+	do_div(div, req->best_parent_rate);
+
+	ndiv = div >> A2W_PLL_FRAC_BITS;
+	fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
+
+	final_rate = ((u64)req->best_parent_rate *
+					((ndiv << A2W_PLL_FRAC_BITS) + fdiv));
+
+	req->rate = final_rate >> A2W_PLL_FRAC_BITS;
+
+	return 0;
+}
+
+static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
+	.is_prepared = raspberrypi_fw_pll_is_on,
+	.recalc_rate = raspberrypi_fw_pll_get_rate,
+	.set_rate = raspberrypi_fw_pll_set_rate,
+	.determine_rate = raspberrypi_pll_determine_rate,
+};
+
+static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
+{
+	u32 min_rate = 0, max_rate = 0;
+	struct clk_init_data init;
+	int ret;
+
+	memset(&init, 0, sizeof(init));
+
+	/* All of the PLLs derive from the external oscillator. */
+	init.parent_names = (const char *[]){ "osc" };
+	init.num_parents = 1;
+	init.name = "pllb";
+	init.ops = &raspberrypi_firmware_pll_clk_ops;
+	init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED;
+
+	/* Get min & max rates set by the firmware */
+	ret = raspberrypi_clock_property(rpi->firmware,
+					 RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
+					 RPI_FIRMWARE_ARM_CLK_ID,
+					 &min_rate);
+	if (ret) {
+		dev_err(rpi->dev, "Failed to get %s min freq: %d\n",
+			init.name, ret);
+		return ret;
+	}
+
+	ret = raspberrypi_clock_property(rpi->firmware,
+					 RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
+					 RPI_FIRMWARE_ARM_CLK_ID,
+					 &max_rate);
+	if (ret) {
+		dev_err(rpi->dev, "Failed to get %s max freq: %d\n",
+			init.name, ret);
+		return ret;
+	}
+
+	if (!min_rate || !max_rate) {
+		dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n",
+			min_rate, max_rate);
+		return -EINVAL;
+	}
+
+	dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n",
+		 min_rate, max_rate);
+
+	rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+	rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+
+	rpi->pllb.init = &init;
+
+	return devm_clk_hw_register(rpi->dev, &rpi->pllb);
+}
+
+static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi)
+{
+	rpi->pllb_arm = clk_hw_register_fixed_factor(rpi->dev,
+				"pllb_arm", "pllb",
+				CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+				1, 2);
+	if (IS_ERR(rpi->pllb_arm)) {
+		dev_err(rpi->dev, "Failed to initialize pllb_arm\n");
+		return PTR_ERR(rpi->pllb_arm);
+	}
+
+	rpi->pllb_arm_lookup = clkdev_hw_create(rpi->pllb_arm, NULL, "cpu0");
+	if (!rpi->pllb_arm_lookup) {
+		dev_err(rpi->dev, "Failed to initialize pllb_arm_lookup\n");
+		clk_hw_unregister_fixed_factor(rpi->pllb_arm);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int raspberrypi_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *firmware_node;
+	struct device *dev = &pdev->dev;
+	struct rpi_firmware *firmware;
+	struct raspberrypi_clk *rpi;
+	int ret;
+
+	firmware_node = of_find_compatible_node(NULL, NULL,
+					"raspberrypi,bcm2835-firmware");
+	if (!firmware_node) {
+		dev_err(dev, "Missing firmware node\n");
+		return -ENOENT;
+	}
+
+	firmware = rpi_firmware_get(firmware_node);
+	of_node_put(firmware_node);
+	if (!firmware)
+		return -EPROBE_DEFER;
+
+	rpi = devm_kzalloc(dev, sizeof(*rpi), GFP_KERNEL);
+	if (!rpi)
+		return -ENOMEM;
+
+	rpi->dev = dev;
+	rpi->firmware = firmware;
+	platform_set_drvdata(pdev, rpi);
+
+	ret = raspberrypi_register_pllb(rpi);
+	if (ret) {
+		dev_err(dev, "Failed to initialize pllb, %d\n", ret);
+		return ret;
+	}
+
+	ret = raspberrypi_register_pllb_arm(rpi);
+	if (ret)
+		return ret;
+
+	rpi->cpufreq = platform_device_register_data(dev, "raspberrypi-cpufreq",
+						     -1, NULL, 0);
+
+	return 0;
+}
+
+static int raspberrypi_clk_remove(struct platform_device *pdev)
+{
+	struct raspberrypi_clk *rpi = platform_get_drvdata(pdev);
+
+	platform_device_unregister(rpi->cpufreq);
+
+	return 0;
+}
+
+static struct platform_driver raspberrypi_clk_driver = {
+	.driver = {
+		.name = "raspberrypi-clk",
+	},
+	.probe          = raspberrypi_clk_probe,
+	.remove		= raspberrypi_clk_remove,
+};
+module_platform_driver(raspberrypi_clk_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
+MODULE_DESCRIPTION("Raspberry Pi firmware clock driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:raspberrypi-clk");

drivers/clk/clk-bulk.c

@@ -75,8 +75,8 @@ void clk_bulk_put(int num_clks, struct clk_bulk_data *clks)
 }
 EXPORT_SYMBOL_GPL(clk_bulk_put);
 
-int __must_check clk_bulk_get(struct device *dev, int num_clks,
-			      struct clk_bulk_data *clks)
+static int __clk_bulk_get(struct device *dev, int num_clks,
+			  struct clk_bulk_data *clks, bool optional)
 {
 	int ret;
 	int i;
@@ -88,10 +88,14 @@ int __must_check clk_bulk_get(struct device *dev, int num_clks,
 		clks[i].clk = clk_get(dev, clks[i].id);
 		if (IS_ERR(clks[i].clk)) {
 			ret = PTR_ERR(clks[i].clk);
+			clks[i].clk = NULL;
+
+			if (ret == -ENOENT && optional)
+				continue;
+
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to get clk '%s': %d\n",
 					clks[i].id, ret);
-			clks[i].clk = NULL;
 			goto err;
 		}
 	}
@@ -103,8 +107,21 @@ int __must_check clk_bulk_get(struct device *dev, int num_clks,
 
 	return ret;
 }
+
+int __must_check clk_bulk_get(struct device *dev, int num_clks,
+			      struct clk_bulk_data *clks)
+{
+	return __clk_bulk_get(dev, num_clks, clks, false);
+}
 EXPORT_SYMBOL(clk_bulk_get);
 
+int __must_check clk_bulk_get_optional(struct device *dev, int num_clks,
+				       struct clk_bulk_data *clks)
+{
+	return __clk_bulk_get(dev, num_clks, clks, true);
+}
+EXPORT_SYMBOL_GPL(clk_bulk_get_optional);
+
 void clk_bulk_put_all(int num_clks, struct clk_bulk_data *clks)
 {
 	if (IS_ERR_OR_NULL(clks))

drivers/clk/clk-cdce706.c

@@ -630,7 +630,7 @@ of_clk_cdce_get(struct of_phandle_args *clkspec, void *data)
 static int cdce706_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
-	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct i2c_adapter *adapter = client->adapter;
 	struct cdce706_dev_data *cdce;
 	int ret;
 

drivers/clk/clk-devres.c

@@ -52,8 +52,8 @@ static void devm_clk_bulk_release(struct device *dev, void *res)
 	clk_bulk_put(devres->num_clks, devres->clks);
 }
 
-int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
-		      struct clk_bulk_data *clks)
+static int __devm_clk_bulk_get(struct device *dev, int num_clks,
+			       struct clk_bulk_data *clks, bool optional)
 {
 	struct clk_bulk_devres *devres;
 	int ret;
@@ -63,6 +63,9 @@ int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
 	if (!devres)
 		return -ENOMEM;
 
+	if (optional)
+		ret = clk_bulk_get_optional(dev, num_clks, clks);
+	else
 		ret = clk_bulk_get(dev, num_clks, clks);
 	if (!ret) {
 		devres->clks = clks;
@@ -74,8 +77,21 @@ int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
 
 	return ret;
 }
+
+int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
+		      struct clk_bulk_data *clks)
+{
+	return __devm_clk_bulk_get(dev, num_clks, clks, false);
+}
 EXPORT_SYMBOL_GPL(devm_clk_bulk_get);
 
+int __must_check devm_clk_bulk_get_optional(struct device *dev, int num_clks,
+		      struct clk_bulk_data *clks)
+{
+	return __devm_clk_bulk_get(dev, num_clks, clks, true);
+}
+EXPORT_SYMBOL_GPL(devm_clk_bulk_get_optional);
+
 int __must_check devm_clk_bulk_get_all(struct device *dev,
 				       struct clk_bulk_data **clks)
 {

drivers/clk/clk-lochnagar.c

@@ -16,7 +16,6 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
-#include <linux/mfd/lochnagar.h>
 #include <linux/mfd/lochnagar1_regs.h>
 #include <linux/mfd/lochnagar2_regs.h>
 
@@ -40,48 +39,46 @@ struct lochnagar_clk {
 struct lochnagar_clk_priv {
 	struct device *dev;
 	struct regmap *regmap;
-	enum lochnagar_type type;
-
-	const char **parents;
-	unsigned int nparents;
 
 	struct lochnagar_clk lclks[LOCHNAGAR_NUM_CLOCKS];
 };
 
-static const char * const lochnagar1_clk_parents[] = {
-	"ln-none",
-	"ln-spdif-mclk",
-	"ln-psia1-mclk",
-	"ln-psia2-mclk",
-	"ln-cdc-clkout",
-	"ln-dsp-clkout",
-	"ln-pmic-32k",
-	"ln-gf-mclk1",
-	"ln-gf-mclk3",
-	"ln-gf-mclk2",
-	"ln-gf-mclk4",
+#define LN_PARENT(NAME) { .name = NAME, .fw_name = NAME }
+
+static const struct clk_parent_data lochnagar1_clk_parents[] = {
+	LN_PARENT("ln-none"),
+	LN_PARENT("ln-spdif-mclk"),
+	LN_PARENT("ln-psia1-mclk"),
+	LN_PARENT("ln-psia2-mclk"),
+	LN_PARENT("ln-cdc-clkout"),
+	LN_PARENT("ln-dsp-clkout"),
+	LN_PARENT("ln-pmic-32k"),
+	LN_PARENT("ln-gf-mclk1"),
+	LN_PARENT("ln-gf-mclk3"),
+	LN_PARENT("ln-gf-mclk2"),
+	LN_PARENT("ln-gf-mclk4"),
 };
 
-static const char * const lochnagar2_clk_parents[] = {
-	"ln-none",
-	"ln-cdc-clkout",
-	"ln-dsp-clkout",
-	"ln-pmic-32k",
-	"ln-spdif-mclk",
-	"ln-clk-12m",
-	"ln-clk-11m",
-	"ln-clk-24m",
-	"ln-clk-22m",
-	"ln-clk-8m",
-	"ln-usb-clk-24m",
-	"ln-gf-mclk1",
-	"ln-gf-mclk3",
-	"ln-gf-mclk2",
-	"ln-psia1-mclk",
-	"ln-psia2-mclk",
-	"ln-spdif-clkout",
-	"ln-adat-mclk",
-	"ln-usb-clk-12m",
+static const struct clk_parent_data lochnagar2_clk_parents[] = {
+	LN_PARENT("ln-none"),
+	LN_PARENT("ln-cdc-clkout"),
+	LN_PARENT("ln-dsp-clkout"),
+	LN_PARENT("ln-pmic-32k"),
+	LN_PARENT("ln-spdif-mclk"),
+	LN_PARENT("ln-clk-12m"),
+	LN_PARENT("ln-clk-11m"),
+	LN_PARENT("ln-clk-24m"),
+	LN_PARENT("ln-clk-22m"),
+	LN_PARENT("ln-clk-8m"),
+	LN_PARENT("ln-usb-clk-24m"),
+	LN_PARENT("ln-gf-mclk1"),
+	LN_PARENT("ln-gf-mclk3"),
+	LN_PARENT("ln-gf-mclk2"),
+	LN_PARENT("ln-psia1-mclk"),
+	LN_PARENT("ln-psia2-mclk"),
+	LN_PARENT("ln-spdif-clkout"),
+	LN_PARENT("ln-adat-mclk"),
+	LN_PARENT("ln-usb-clk-12m"),
 };
 
 #define LN1_CLK(ID, NAME, REG) \
@@ -122,6 +119,24 @@ static const struct lochnagar_clk lochnagar2_clks[LOCHNAGAR_NUM_CLOCKS] = {
 	LN2_CLK(SOUNDCARD_MCLK, "ln-soundcard-mclk"),
 };
 
+struct lochnagar_config {
+	const struct clk_parent_data *parents;
+	int nparents;
+	const struct lochnagar_clk *clks;
+};
+
+static const struct lochnagar_config lochnagar1_conf = {
+	.parents = lochnagar1_clk_parents,
+	.nparents = ARRAY_SIZE(lochnagar1_clk_parents),
+	.clks = lochnagar1_clks,
+};
+
+static const struct lochnagar_config lochnagar2_conf = {
+	.parents = lochnagar2_clk_parents,
+	.nparents = ARRAY_SIZE(lochnagar2_clk_parents),
+	.clks = lochnagar2_clks,
+};
+
 static inline struct lochnagar_clk *lochnagar_hw_to_lclk(struct clk_hw *hw)
 {
 	return container_of(hw, struct lochnagar_clk, hw);
@@ -183,7 +198,7 @@ static u8 lochnagar_clk_get_parent(struct clk_hw *hw)
 	if (ret < 0) {
 		dev_dbg(priv->dev, "Failed to read parent of %s: %d\n",
 			lclk->name, ret);
-		return priv->nparents;
+		return hw->init->num_parents;
 	}
 
 	val &= lclk->src_mask;
@@ -198,46 +213,6 @@ static const struct clk_ops lochnagar_clk_ops = {
 	.get_parent = lochnagar_clk_get_parent,
 };
 
-static int lochnagar_init_parents(struct lochnagar_clk_priv *priv)
-{
-	struct device_node *np = priv->dev->of_node;
-	int i, j;
-
-	switch (priv->type) {
-	case LOCHNAGAR1:
-		memcpy(priv->lclks, lochnagar1_clks, sizeof(lochnagar1_clks));
-
-		priv->nparents = ARRAY_SIZE(lochnagar1_clk_parents);
-		priv->parents = devm_kmemdup(priv->dev, lochnagar1_clk_parents,
-					     sizeof(lochnagar1_clk_parents),
-					     GFP_KERNEL);
-		break;
-	case LOCHNAGAR2:
-		memcpy(priv->lclks, lochnagar2_clks, sizeof(lochnagar2_clks));
-
-		priv->nparents = ARRAY_SIZE(lochnagar2_clk_parents);
-		priv->parents = devm_kmemdup(priv->dev, lochnagar2_clk_parents,
-					     sizeof(lochnagar2_clk_parents),
-					     GFP_KERNEL);
-		break;
-	default:
-		dev_err(priv->dev, "Unknown Lochnagar type: %d\n", priv->type);
-		return -EINVAL;
-	}
-
-	if (!priv->parents)
-		return -ENOMEM;
-
-	for (i = 0; i < priv->nparents; i++) {
-		j = of_property_match_string(np, "clock-names",
-					     priv->parents[i]);
-		if (j >= 0)
-			priv->parents[i] = of_clk_get_parent_name(np, j);
-	}
-
-	return 0;
-}
-
 static struct clk_hw *
 lochnagar_of_clk_hw_get(struct of_phandle_args *clkspec, void *data)
 {
@@ -252,16 +227,42 @@ lochnagar_of_clk_hw_get(struct of_phandle_args *clkspec, void *data)
 	return &priv->lclks[idx].hw;
 }
 
-static int lochnagar_init_clks(struct lochnagar_clk_priv *priv)
+static const struct of_device_id lochnagar_of_match[] = {
+	{ .compatible = "cirrus,lochnagar1-clk", .data = &lochnagar1_conf },
+	{ .compatible = "cirrus,lochnagar2-clk", .data = &lochnagar2_conf },
+	{}
+};
+MODULE_DEVICE_TABLE(of, lochnagar_of_match);
+
+static int lochnagar_clk_probe(struct platform_device *pdev)
 {
 	struct clk_init_data clk_init = {
 		.ops = &lochnagar_clk_ops,
-		.parent_names = priv->parents,
-		.num_parents = priv->nparents,
 	};
+	struct device *dev = &pdev->dev;
+	struct lochnagar_clk_priv *priv;
+	const struct of_device_id *of_id;
 	struct lochnagar_clk *lclk;
+	struct lochnagar_config *conf;
 	int ret, i;
 
+	of_id = of_match_device(lochnagar_of_match, dev);
+	if (!of_id)
+		return -EINVAL;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->regmap = dev_get_regmap(dev->parent, NULL);
+	conf = (struct lochnagar_config *)of_id->data;
+
+	memcpy(priv->lclks, conf->clks, sizeof(priv->lclks));
+
+	clk_init.parent_data = conf->parents;
+	clk_init.num_parents = conf->nparents;
+
 	for (i = 0; i < ARRAY_SIZE(priv->lclks); i++) {
 		lclk = &priv->lclks[i];
 
@@ -273,55 +274,21 @@ static int lochnagar_init_clks(struct lochnagar_clk_priv *priv)
 		lclk->priv = priv;
 		lclk->hw.init = &clk_init;
 
-		ret = devm_clk_hw_register(priv->dev, &lclk->hw);
+		ret = devm_clk_hw_register(dev, &lclk->hw);
 		if (ret) {
-			dev_err(priv->dev, "Failed to register %s: %d\n",
+			dev_err(dev, "Failed to register %s: %d\n",
 				lclk->name, ret);
 			return ret;
 		}
 	}
 
-	ret = devm_of_clk_add_hw_provider(priv->dev, lochnagar_of_clk_hw_get,
-					  priv);
+	ret = devm_of_clk_add_hw_provider(dev, lochnagar_of_clk_hw_get, priv);
 	if (ret < 0)
-		dev_err(priv->dev, "Failed to register provider: %d\n", ret);
+		dev_err(dev, "Failed to register provider: %d\n", ret);
 
 	return ret;
 }
 
-static const struct of_device_id lochnagar_of_match[] = {
-	{ .compatible = "cirrus,lochnagar1-clk", .data = (void *)LOCHNAGAR1 },
-	{ .compatible = "cirrus,lochnagar2-clk", .data = (void *)LOCHNAGAR2 },
-	{}
-};
-MODULE_DEVICE_TABLE(of, lochnagar_of_match);
-
-static int lochnagar_clk_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct lochnagar_clk_priv *priv;
-	const struct of_device_id *of_id;
-	int ret;
-
-	of_id = of_match_device(lochnagar_of_match, dev);
-	if (!of_id)
-		return -EINVAL;
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	priv->dev = dev;
-	priv->regmap = dev_get_regmap(dev->parent, NULL);
-	priv->type = (enum lochnagar_type)of_id->data;
-
-	ret = lochnagar_init_parents(priv);
-	if (ret)
-		return ret;
-
-	return lochnagar_init_clks(priv);
-}
-
 static struct platform_driver lochnagar_clk_driver = {
 	.driver = {
 		.name = "lochnagar-clk",

drivers/clk/clk-pwm.c

@@ -44,10 +44,24 @@ static unsigned long clk_pwm_recalc_rate(struct clk_hw *hw,
 	return clk_pwm->fixed_rate;
 }
 
+static int clk_pwm_get_duty_cycle(struct clk_hw *hw, struct clk_duty *duty)
+{
+	struct clk_pwm *clk_pwm = to_clk_pwm(hw);
+	struct pwm_state state;
+
+	pwm_get_state(clk_pwm->pwm, &state);
+
+	duty->num = state.duty_cycle;
+	duty->den = state.period;
+
+	return 0;
+}
+
 static const struct clk_ops clk_pwm_ops = {
 	.prepare = clk_pwm_prepare,
 	.unprepare = clk_pwm_unprepare,
 	.recalc_rate = clk_pwm_recalc_rate,
+	.get_duty_cycle = clk_pwm_get_duty_cycle,
 };
 
 static int clk_pwm_probe(struct platform_device *pdev)

drivers/clk/clk-qoriq.c

@@ -634,6 +634,17 @@ static const struct clockgen_chipinfo chipinfo[] = {
 		.pll_mask = 0x37,
 		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
 	},
+	{
+		.compat = "fsl,lx2160a-clockgen",
+		.cmux_groups = {
+			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+		},
+		.cmux_to_group = {
+			0, 0, 0, 0, 1, 1, 1, 1, -1
+		},
+		.pll_mask = 0x37,
+		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
+	},
 	{
 		.compat = "fsl,p2041-clockgen",
 		.guts_compat = "fsl,qoriq-device-config-1.0",
@@ -1493,6 +1504,7 @@ CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls1046a, "fsl,ls1046a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls1088a, "fsl,ls1088a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_lx2160a, "fsl,lx2160a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_p2041, "fsl,p2041-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_p3041, "fsl,p3041-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_p4080, "fsl,p4080-clockgen", clockgen_init);

drivers/clk/clk-si544.c

@@ -7,6 +7,7 @@
 
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
+#include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
@@ -50,6 +51,11 @@
 /* Lowest frequency synthesizeable using only the HS divider */
 #define MIN_HSDIV_FREQ	(FVCO_MIN / HS_DIV_MAX)
 
+/* Range and interpretation of the adjustment value */
+#define DELTA_M_MAX	8161512
+#define DELTA_M_FRAC_NUM	19
+#define DELTA_M_FRAC_DEN	20000
+
 enum si544_speed_grade {
 	si544a,
 	si544b,
@@ -71,12 +77,14 @@ struct clk_si544 {
  * @hs_div:		1st divider, 5..2046, must be even when >33
  * @ls_div_bits:	2nd divider, as 2^x, range 0..5
  *                      If ls_div_bits is non-zero, hs_div must be even
+ * @delta_m:		Frequency shift for small -950..+950 ppm changes, 24 bit
  */
 struct clk_si544_muldiv {
 	u32 fb_div_frac;
 	u16 fb_div_int;
 	u16 hs_div;
 	u8 ls_div_bits;
+	s32 delta_m;
 };
 
 /* Enables or disables the output driver */
@@ -134,9 +142,30 @@ static int si544_get_muldiv(struct clk_si544 *data,
 	settings->fb_div_int = reg[4] | (reg[5] & 0x07) << 8;
 	settings->fb_div_frac = reg[0] | reg[1] << 8 | reg[2] << 16 |
 				reg[3] << 24;
+
+	err = regmap_bulk_read(data->regmap, SI544_REG_ADPLL_DELTA_M0, reg, 3);
+	if (err)
+		return err;
+
+	/* Interpret as 24-bit signed number */
+	settings->delta_m = reg[0] << 8 | reg[1] << 16 | reg[2] << 24;
+	settings->delta_m >>= 8;
+
 	return 0;
 }
 
+static int si544_set_delta_m(struct clk_si544 *data, s32 delta_m)
+{
+	u8 reg[3];
+
+	reg[0] = delta_m;
+	reg[1] = delta_m >> 8;
+	reg[2] = delta_m >> 16;
+
+	return regmap_bulk_write(data->regmap, SI544_REG_ADPLL_DELTA_M0,
+				 reg, 3);
+}
+
 static int si544_set_muldiv(struct clk_si544 *data,
 	struct clk_si544_muldiv *settings)
 {
@@ -238,11 +267,15 @@ static int si544_calc_muldiv(struct clk_si544_muldiv *settings,
 	do_div(vco, FXO);
 	settings->fb_div_frac = vco;
 
+	/* Reset the frequency adjustment */
+	settings->delta_m = 0;
+
 	return 0;
 }
 
 /* Calculate resulting frequency given the register settings */
-static unsigned long si544_calc_rate(struct clk_si544_muldiv *settings)
+static unsigned long si544_calc_center_rate(
+		const struct clk_si544_muldiv *settings)
 {
 	u32 d = settings->hs_div * BIT(settings->ls_div_bits);
 	u64 vco;
@@ -261,6 +294,25 @@ static unsigned long si544_calc_rate(struct clk_si544_muldiv *settings)
 	return vco;
 }
 
+static unsigned long si544_calc_rate(const struct clk_si544_muldiv *settings)
+{
+	unsigned long rate = si544_calc_center_rate(settings);
+	s64 delta = (s64)rate * (DELTA_M_FRAC_NUM * settings->delta_m);
+
+	/*
+	 * The clock adjustment is much smaller than 1 Hz, round to the
+	 * nearest multiple. Apparently div64_s64 rounds towards zero, hence
+	 * check the sign and adjust into the proper direction.
+	 */
+	if (settings->delta_m < 0)
+		delta -= ((s64)DELTA_M_MAX * DELTA_M_FRAC_DEN) / 2;
+	else
+		delta += ((s64)DELTA_M_MAX * DELTA_M_FRAC_DEN) / 2;
+	delta = div64_s64(delta, ((s64)DELTA_M_MAX * DELTA_M_FRAC_DEN));
+
+	return rate + delta;
+}
+
 static unsigned long si544_recalc_rate(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
@@ -279,33 +331,60 @@ static long si544_round_rate(struct clk_hw *hw, unsigned long rate,
 		unsigned long *parent_rate)
 {
 	struct clk_si544 *data = to_clk_si544(hw);
-	struct clk_si544_muldiv settings;
-	int err;
 
 	if (!is_valid_frequency(data, rate))
 		return -EINVAL;
 
-	err = si544_calc_muldiv(&settings, rate);
-	if (err)
-		return err;
+	/* The accuracy is less than 1 Hz, so any rate is possible */
+	return rate;
+}
 
-	return si544_calc_rate(&settings);
+/* Calculates the maximum "small" change, 950 * rate / 1000000 */
+static unsigned long si544_max_delta(unsigned long rate)
+{
+	u64 num = rate;
+
+	num *= DELTA_M_FRAC_NUM;
+	do_div(num, DELTA_M_FRAC_DEN);
+
+	return num;
+}
+
+static s32 si544_calc_delta(s32 delta, s32 max_delta)
+{
+	s64 n = (s64)delta * DELTA_M_MAX;
+
+	return div_s64(n, max_delta);
 }
 
-/*
- * Update output frequency for "big" frequency changes
- */
 static int si544_set_rate(struct clk_hw *hw, unsigned long rate,
 		unsigned long parent_rate)
 {
 	struct clk_si544 *data = to_clk_si544(hw);
 	struct clk_si544_muldiv settings;
+	unsigned long center;
+	long max_delta;
+	long delta;
 	unsigned int old_oe_state;
 	int err;
 
 	if (!is_valid_frequency(data, rate))
 		return -EINVAL;
 
+	/* Try using the frequency adjustment feature for a <= 950ppm change */
+	err = si544_get_muldiv(data, &settings);
+	if (err)
+		return err;
+
+	center = si544_calc_center_rate(&settings);
+	max_delta = si544_max_delta(center);
+	delta = rate - center;
+
+	if (abs(delta) <= max_delta)
+		return si544_set_delta_m(data,
+					 si544_calc_delta(delta, max_delta));
+
+	/* Too big for the delta adjustment, need to reprogram */
 	err = si544_calc_muldiv(&settings, rate);
 	if (err)
 		return err;
@@ -321,6 +400,9 @@ static int si544_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (err < 0)
 		return err;
 
+	err = si544_set_delta_m(data, settings.delta_m);
+	if (err < 0)
+		return err;
 
 	err = si544_set_muldiv(data, &settings);
 	if (err < 0)

drivers/clk/clk.c

@@ -1324,10 +1324,7 @@ static void clk_core_init_rate_req(struct clk_core * const core,
 
 static bool clk_core_can_round(struct clk_core * const core)
 {
-	if (core->ops->determine_rate || core->ops->round_rate)
-		return true;
-
-	return false;
+	return core->ops->determine_rate || core->ops->round_rate;
 }
 
 static int clk_core_round_rate_nolock(struct clk_core *core,
@@ -2194,7 +2191,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 EXPORT_SYMBOL_GPL(clk_set_rate);
 
 /**
- * clk_set_rate_exclusive - specify a new rate get exclusive control
+ * clk_set_rate_exclusive - specify a new rate and get exclusive control
  * @clk: the clk whose rate is being changed
  * @rate: the new rate for clk
  *
@@ -2202,7 +2199,7 @@ EXPORT_SYMBOL_GPL(clk_set_rate);
  * within a critical section
  *
  * This can be used initially to ensure that at least 1 consumer is
- * statisfied when several consumers are competing for exclusivity over the
+ * satisfied when several consumers are competing for exclusivity over the
  * same clock provider.
  *
  * The exclusivity is not applied if setting the rate failed.
@@ -2997,20 +2994,65 @@ static int clk_flags_show(struct seq_file *s, void *data)
 }
 DEFINE_SHOW_ATTRIBUTE(clk_flags);
 
+static void possible_parent_show(struct seq_file *s, struct clk_core *core,
+				 unsigned int i, char terminator)
+{
+	struct clk_core *parent;
+
+	/*
+	 * Go through the following options to fetch a parent's name.
+	 *
+	 * 1. Fetch the registered parent clock and use its name
+	 * 2. Use the global (fallback) name if specified
+	 * 3. Use the local fw_name if provided
+	 * 4. Fetch parent clock's clock-output-name if DT index was set
+	 *
+	 * This may still fail in some cases, such as when the parent is
+	 * specified directly via a struct clk_hw pointer, but it isn't
+	 * registered (yet).
+	 */
+	parent = clk_core_get_parent_by_index(core, i);
+	if (parent)
+		seq_printf(s, "%s", parent->name);
+	else if (core->parents[i].name)
+		seq_printf(s, "%s", core->parents[i].name);
+	else if (core->parents[i].fw_name)
+		seq_printf(s, "<%s>(fw)", core->parents[i].fw_name);
+	else if (core->parents[i].index >= 0)
+		seq_printf(s, "%s",
+			   of_clk_get_parent_name(core->of_node,
+						  core->parents[i].index));
+	else
+		seq_puts(s, "(missing)");
+
+	seq_putc(s, terminator);
+}
+
 static int possible_parents_show(struct seq_file *s, void *data)
 {
 	struct clk_core *core = s->private;
 	int i;
 
 	for (i = 0; i < core->num_parents - 1; i++)
-		seq_printf(s, "%s ", core->parents[i].name);
+		possible_parent_show(s, core, i, ' ');
 
-	seq_printf(s, "%s\n", core->parents[i].name);
+	possible_parent_show(s, core, i, '\n');
 
 	return 0;
 }
 DEFINE_SHOW_ATTRIBUTE(possible_parents);
 
+static int current_parent_show(struct seq_file *s, void *data)
+{
+	struct clk_core *core = s->private;
+
+	if (core->parent)
+		seq_printf(s, "%s\n", core->parent->name);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(current_parent);
+
 static int clk_duty_cycle_show(struct seq_file *s, void *data)
 {
 	struct clk_core *core = s->private;
@@ -3043,6 +3085,10 @@ static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry)
 	debugfs_create_file("clk_duty_cycle", 0444, root, core,
 			    &clk_duty_cycle_fops);
 
+	if (core->num_parents > 0)
+		debugfs_create_file("clk_parent", 0444, root, core,
+				    &current_parent_fops);
+
 	if (core->num_parents > 1)
 		debugfs_create_file("clk_possible_parents", 0444, root, core,
 				    &possible_parents_fops);
@@ -4038,6 +4084,7 @@ struct of_clk_provider {
 	void *data;
 };
 
+extern struct of_device_id __clk_of_table;
 static const struct of_device_id __clk_of_table_sentinel
 	__used __section(__clk_of_table_end);
 

drivers/clk/clk.h

@@ -33,10 +33,6 @@ clk_hw_create_clk(struct device *dev, struct clk_hw *hw, const char *dev_id,
 {
 	return (struct clk *)hw;
 }
-static struct clk_hw *__clk_get_hw(struct clk *clk)
-{
-	return (struct clk_hw *)clk;
-}
 static inline void __clk_put(struct clk *clk) { }
 
 #endif

drivers/clk/imx/clk-busy.c

@@ -72,13 +72,14 @@ static const struct clk_ops clk_busy_divider_ops = {
 	.set_rate = clk_busy_divider_set_rate,
 };
 
-struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+struct clk_hw *imx_clk_hw_busy_divider(const char *name, const char *parent_name,
 				 void __iomem *reg, u8 shift, u8 width,
 				 void __iomem *busy_reg, u8 busy_shift)
 {
 	struct clk_busy_divider *busy;
-	struct clk *clk;
+	struct clk_hw *hw;
 	struct clk_init_data init;
+	int ret;
 
 	busy = kzalloc(sizeof(*busy), GFP_KERNEL);
 	if (!busy)
@@ -101,11 +102,15 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
 
 	busy->div.hw.init = &init;
 
-	clk = clk_register(NULL, &busy->div.hw);
-	if (IS_ERR(clk))
+	hw = &busy->div.hw;
+
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
 		kfree(busy);
+		return ERR_PTR(ret);
+	}
 
-	return clk;
+	return hw;
 }
 
 struct clk_busy_mux {
@@ -146,13 +151,14 @@ static const struct clk_ops clk_busy_mux_ops = {
 	.set_parent = clk_busy_mux_set_parent,
 };
 
-struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+struct clk_hw *imx_clk_hw_busy_mux(const char *name, void __iomem *reg, u8 shift,
 			     u8 width, void __iomem *busy_reg, u8 busy_shift,
 			     const char * const *parent_names, int num_parents)
 {
 	struct clk_busy_mux *busy;
-	struct clk *clk;
+	struct clk_hw *hw;
 	struct clk_init_data init;
+	int ret;
 
 	busy = kzalloc(sizeof(*busy), GFP_KERNEL);
 	if (!busy)
@@ -175,9 +181,13 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 
 	busy->mux.hw.init = &init;
 
-	clk = clk_register(NULL, &busy->mux.hw);
-	if (IS_ERR(clk))
+	hw = &busy->mux.hw;
+
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
 		kfree(busy);
+		return ERR_PTR(ret);
+	}
 
-	return clk;
+	return hw;
 }

drivers/clk/imx/clk-cpu.c

@@ -69,13 +69,14 @@ static const struct clk_ops clk_cpu_ops = {
 	.set_rate	= clk_cpu_set_rate,
 };
 
-struct clk *imx_clk_cpu(const char *name, const char *parent_name,
+struct clk_hw *imx_clk_hw_cpu(const char *name, const char *parent_name,
 		struct clk *div, struct clk *mux, struct clk *pll,
 		struct clk *step)
 {
 	struct clk_cpu *cpu;
-	struct clk *clk;
+	struct clk_hw *hw;
 	struct clk_init_data init;
+	int ret;
 
 	cpu = kzalloc(sizeof(*cpu), GFP_KERNEL);
 	if (!cpu)
@@ -93,10 +94,13 @@ struct clk *imx_clk_cpu(const char *name, const char *parent_name,
 	init.num_parents = 1;
 
 	cpu->hw.init = &init;
+	hw = &cpu->hw;
 
-	clk = clk_register(NULL, &cpu->hw);
-	if (IS_ERR(clk))
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
 		kfree(cpu);
+		return ERR_PTR(ret);
+	}
 
-	return clk;
+	return hw;
 }

drivers/clk/imx/clk-fixup-div.c

@@ -85,13 +85,14 @@ static const struct clk_ops clk_fixup_div_ops = {
 	.set_rate = clk_fixup_div_set_rate,
 };
 
-struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+struct clk_hw *imx_clk_hw_fixup_divider(const char *name, const char *parent,
 				  void __iomem *reg, u8 shift, u8 width,
 				  void (*fixup)(u32 *val))
 {
 	struct clk_fixup_div *fixup_div;
-	struct clk *clk;
+	struct clk_hw *hw;
 	struct clk_init_data init;
+	int ret;
 
 	if (!fixup)
 		return ERR_PTR(-EINVAL);
@@ -114,9 +115,13 @@ struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
 	fixup_div->ops = &clk_divider_ops;
 	fixup_div->fixup = fixup;
 
-	clk = clk_register(NULL, &fixup_div->divider.hw);
-	if (IS_ERR(clk))
+	hw = &fixup_div->divider.hw;
+
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
 		kfree(fixup_div);
+		return ERR_PTR(ret);
+	}
 
-	return clk;
+	return hw;
 }

drivers/clk/imx/clk-fixup-mux.c

@@ -63,13 +63,14 @@ static const struct clk_ops clk_fixup_mux_ops = {
 	.set_parent = clk_fixup_mux_set_parent,
 };
 
-struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+struct clk_hw *imx_clk_hw_fixup_mux(const char *name, void __iomem *reg,
 			      u8 shift, u8 width, const char * const *parents,
 			      int num_parents, void (*fixup)(u32 *val))
 {
 	struct clk_fixup_mux *fixup_mux;
-	struct clk *clk;
+	struct clk_hw *hw;
 	struct clk_init_data init;
+	int ret;
 
 	if (!fixup)
 		return ERR_PTR(-EINVAL);
@@ -92,9 +93,13 @@ struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
 	fixup_mux->ops = &clk_mux_ops;
 	fixup_mux->fixup = fixup;
 
-	clk = clk_register(NULL, &fixup_mux->mux.hw);
-	if (IS_ERR(clk))
+	hw = &fixup_mux->mux.hw;
+
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
 		kfree(fixup_mux);
+		return ERR_PTR(ret);
+	}
 
-	return clk;
+	return hw;
 }

drivers/clk/imx/clk-gate-exclusive.c

@@ -55,13 +55,14 @@ static const struct clk_ops clk_gate_exclusive_ops = {
 	.is_enabled = clk_gate_exclusive_is_enabled,
 };
 
-struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
+struct clk_hw *imx_clk_hw_gate_exclusive(const char *name, const char *parent,
 	 void __iomem *reg, u8 shift, u32 exclusive_mask)
 {
 	struct clk_gate_exclusive *exgate;
 	struct clk_gate *gate;
-	struct clk *clk;
+	struct clk_hw *hw;
 	struct clk_init_data init;
+	int ret;
 
 	if (exclusive_mask == 0)
 		return ERR_PTR(-EINVAL);
@@ -83,9 +84,13 @@ struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
 	gate->hw.init = &init;
 	exgate->exclusive_mask = exclusive_mask;
 
-	clk = clk_register(NULL, &gate->hw);
-	if (IS_ERR(clk))
-		kfree(exgate);
+	hw = &gate->hw;
 
-	return clk;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(gate);
+		return ERR_PTR(ret);
+	}
+
+	return hw;
 }

drivers/clk/imx/clk-gate2.c

@@ -122,15 +122,16 @@ static const struct clk_ops clk_gate2_ops = {
 	.is_enabled = clk_gate2_is_enabled,
 };
 
-struct clk *clk_register_gate2(struct device *dev, const char *name,
+struct clk_hw *clk_hw_register_gate2(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 bit_idx, u8 cgr_val,
 		u8 clk_gate2_flags, spinlock_t *lock,
 		unsigned int *share_count)
 {
 	struct clk_gate2 *gate;
-	struct clk *clk;
+	struct clk_hw *hw;
 	struct clk_init_data init;
+	int ret;
 
 	gate = kzalloc(sizeof(struct clk_gate2), GFP_KERNEL);
 	if (!gate)
@@ -151,10 +152,13 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
 	init.num_parents = parent_name ? 1 : 0;
 
 	gate->hw.init = &init;
+	hw = &gate->hw;
 
-	clk = clk_register(dev, &gate->hw);
-	if (IS_ERR(clk))
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
 		kfree(gate);
+		return ERR_PTR(ret);
+	}
 
-	return clk;
+	return hw;
 }

drivers/clk/imx/clk-imx7ulp.c

@@ -115,7 +115,7 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
 
 	clks[IMX7ULP_CLK_NIC0_DIV]	= imx_clk_hw_divider_flags("nic0_clk",		"nic_sel",  base + 0x40, 24, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
 	clks[IMX7ULP_CLK_NIC1_DIV]	= imx_clk_hw_divider_flags("nic1_clk",		"nic0_clk", base + 0x40, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
-	clks[IMX7ULP_CLK_NIC1_BUS_DIV]	= imx_clk_hw_divider_flags("nic1_bus_clk",	"nic1_clk", base + 0x40, 4,  4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX7ULP_CLK_NIC1_BUS_DIV]	= imx_clk_hw_divider_flags("nic1_bus_clk",	"nic0_clk", base + 0x40, 4,  4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
 
 	clks[IMX7ULP_CLK_GPU_DIV]	= imx_clk_hw_divider("gpu_clk", "nic0_clk", base + 0x40, 20, 4);
 

drivers/clk/imx/clk-imx8mm.c

@@ -288,6 +288,9 @@ static const char *imx8mm_usb_core_sels[] = {"osc_24m", "sys_pll1_100m", "sys_pl
 static const char *imx8mm_usb_phy_sels[] = {"osc_24m", "sys_pll1_100m", "sys_pll1_40m", "sys_pll2_100m",
 					     "sys_pll2_200m", "clk_ext2", "clk_ext3", "audio_pll2_out", };
 
+static const char *imx8mm_gic_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_40m", "sys_pll2_100m",
+					"sys_pll1_800m", "clk_ext2", "clk_ext4", "audio_pll2_out" };
+
 static const char *imx8mm_ecspi1_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_40m", "sys_pll1_160m",
 					   "sys_pll1_800m", "sys_pll3_out", "sys_pll2_250m", "audio_pll2_out", };
 
@@ -325,7 +328,7 @@ static const char *imx8mm_dsi_dbi_sels[] = {"osc_24m", "sys_pll1_266m", "sys_pll
 					    "sys_pll2_1000m", "sys_pll3_out", "audio_pll2_out", "video_pll1_out", };
 
 static const char *imx8mm_usdhc3_sels[] = {"osc_24m", "sys_pll1_400m", "sys_pll1_800m", "sys_pll2_500m",
-					   "sys_pll3_out", "sys_pll1_266m", "audio_pll2_clk", "sys_pll1_100m", };
+					   "sys_pll3_out", "sys_pll1_266m", "audio_pll2_out", "sys_pll1_100m", };
 
 static const char *imx8mm_csi1_core_sels[] = {"osc_24m", "sys_pll1_266m", "sys_pll2_250m", "sys_pll1_800m",
 					      "sys_pll2_1000m", "sys_pll3_out", "audio_pll2_out", "video_pll1_out", };
@@ -361,11 +364,11 @@ static const char *imx8mm_pdm_sels[] = {"osc_24m", "sys_pll2_100m", "audio_pll1_
 					"sys_pll2_1000m", "sys_pll3_out", "clk_ext3", "audio_pll2_out", };
 
 static const char *imx8mm_vpu_h1_sels[] = {"osc_24m", "vpu_pll_out", "sys_pll1_800m", "sys_pll2_1000m",
-					   "audio_pll2_clk", "sys_pll2_125m", "sys_pll3_clk", "audio_pll1_out", };
+					   "audio_pll2_out", "sys_pll2_125m", "sys_pll3_clk", "audio_pll1_out", };
 
 static const char *imx8mm_dram_core_sels[] = {"dram_pll_out", "dram_alt_root", };
 
-static const char *imx8mm_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "osc_27m", "sys_pll1_200m", "audio_pll2_clk",
+static const char *imx8mm_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "osc_27m", "sys_pll1_200m", "audio_pll2_out",
 					 "vpu_pll", "sys_pll1_80m", };
 
 static struct clk *clks[IMX8MM_CLK_END];
@@ -523,7 +526,7 @@ static int __init imx8mm_clocks_init(struct device_node *ccm_node)
 
 	/* IP */
 	clks[IMX8MM_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mm_dram_alt_sels, base + 0xa000);
-	clks[IMX8MM_CLK_DRAM_APB] = imx8m_clk_composite("dram_apb", imx8mm_dram_apb_sels, base + 0xa080);
+	clks[IMX8MM_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mm_dram_apb_sels, base + 0xa080);
 	clks[IMX8MM_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mm_vpu_g1_sels, base + 0xa100);
 	clks[IMX8MM_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mm_vpu_g2_sels, base + 0xa180);
 	clks[IMX8MM_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mm_disp_dtrc_sels, base + 0xa200);
@@ -558,6 +561,7 @@ static int __init imx8mm_clocks_init(struct device_node *ccm_node)
 	clks[IMX8MM_CLK_UART4] = imx8m_clk_composite("uart4", imx8mm_uart4_sels, base + 0xb080);
 	clks[IMX8MM_CLK_USB_CORE_REF] = imx8m_clk_composite("usb_core_ref", imx8mm_usb_core_sels, base + 0xb100);
 	clks[IMX8MM_CLK_USB_PHY_REF] = imx8m_clk_composite("usb_phy_ref", imx8mm_usb_phy_sels, base + 0xb180);
+	clks[IMX8MM_CLK_GIC] = imx8m_clk_composite_critical("gic", imx8mm_gic_sels, base + 0xb200);
 	clks[IMX8MM_CLK_ECSPI1] = imx8m_clk_composite("ecspi1", imx8mm_ecspi1_sels, base + 0xb280);
 	clks[IMX8MM_CLK_ECSPI2] = imx8m_clk_composite("ecspi2", imx8mm_ecspi2_sels, base + 0xb300);
 	clks[IMX8MM_CLK_PWM1] = imx8m_clk_composite("pwm1", imx8mm_pwm1_sels, base + 0xb380);
@@ -590,6 +594,11 @@ static int __init imx8mm_clocks_init(struct device_node *ccm_node)
 	clks[IMX8MM_CLK_ECSPI2_ROOT] = imx_clk_gate4("ecspi2_root_clk", "ecspi2", base + 0x4080, 0);
 	clks[IMX8MM_CLK_ECSPI3_ROOT] = imx_clk_gate4("ecspi3_root_clk", "ecspi3", base + 0x4090, 0);
 	clks[IMX8MM_CLK_ENET1_ROOT] = imx_clk_gate4("enet1_root_clk", "enet_axi", base + 0x40a0, 0);
+	clks[IMX8MM_CLK_GPIO1_ROOT] = imx_clk_gate4("gpio1_root_clk", "ipg_root", base + 0x40b0, 0);
+	clks[IMX8MM_CLK_GPIO2_ROOT] = imx_clk_gate4("gpio2_root_clk", "ipg_root", base + 0x40c0, 0);
+	clks[IMX8MM_CLK_GPIO3_ROOT] = imx_clk_gate4("gpio3_root_clk", "ipg_root", base + 0x40d0, 0);
+	clks[IMX8MM_CLK_GPIO4_ROOT] = imx_clk_gate4("gpio4_root_clk", "ipg_root", base + 0x40e0, 0);
+	clks[IMX8MM_CLK_GPIO5_ROOT] = imx_clk_gate4("gpio5_root_clk", "ipg_root", base + 0x40f0, 0);
 	clks[IMX8MM_CLK_GPT1_ROOT] = imx_clk_gate4("gpt1_root_clk", "gpt1", base + 0x4100, 0);
 	clks[IMX8MM_CLK_I2C1_ROOT] = imx_clk_gate4("i2c1_root_clk", "i2c1", base + 0x4170, 0);
 	clks[IMX8MM_CLK_I2C2_ROOT] = imx_clk_gate4("i2c2_root_clk", "i2c2", base + 0x4180, 0);
@@ -617,6 +626,7 @@ static int __init imx8mm_clocks_init(struct device_node *ccm_node)
 	clks[IMX8MM_CLK_SAI5_IPG] = imx_clk_gate2_shared2("sai5_ipg_clk", "ipg_audio_root", base + 0x4370, 0, &share_count_sai5);
 	clks[IMX8MM_CLK_SAI6_ROOT] = imx_clk_gate2_shared2("sai6_root_clk", "sai6", base + 0x4380, 0, &share_count_sai6);
 	clks[IMX8MM_CLK_SAI6_IPG] = imx_clk_gate2_shared2("sai6_ipg_clk", "ipg_audio_root", base + 0x4380, 0, &share_count_sai6);
+	clks[IMX8MM_CLK_SNVS_ROOT] = imx_clk_gate4("snvs_root_clk", "ipg_root", base + 0x4470, 0);
 	clks[IMX8MM_CLK_UART1_ROOT] = imx_clk_gate4("uart1_root_clk", "uart1", base + 0x4490, 0);
 	clks[IMX8MM_CLK_UART2_ROOT] = imx_clk_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0);
 	clks[IMX8MM_CLK_UART3_ROOT] = imx_clk_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0);

drivers/clk/imx/clk-imx8mq.c

@@ -192,6 +192,9 @@ static const char * const imx8mq_usb_core_sels[] = {"osc_25m", "sys1_pll_100m",
 static const char * const imx8mq_usb_phy_sels[] = {"osc_25m", "sys1_pll_100m", "sys1_pll_40m", "sys2_pll_100m",
 					     "sys2_pll_200m", "clk_ext2", "clk_ext3", "audio_pll2_out", };
 
+static const char * const imx8mq_gic_sels[] = {"osc_25m", "sys2_pll_200m", "sys1_pll_40m", "sys2_pll_100m",
+					       "sys2_pll_200m", "clk_ext2", "clk_ext3", "audio_pll2_out" };
+
 static const char * const imx8mq_ecspi1_sels[] = {"osc_25m", "sys2_pll_200m", "sys1_pll_40m", "sys1_pll_160m",
 					   "sys1_pll_800m", "sys3_pll2_out", "sys2_pll_250m", "audio_pll2_out", };
 
@@ -269,13 +272,20 @@ static const char * const imx8mq_clko2_sels[] = {"osc_25m", "sys2_pll_200m", "sy
 
 static struct clk_onecell_data clk_data;
 
+static struct clk ** const uart_clks[] = {
+	&clks[IMX8MQ_CLK_UART1_ROOT],
+	&clks[IMX8MQ_CLK_UART2_ROOT],
+	&clks[IMX8MQ_CLK_UART3_ROOT],
+	&clks[IMX8MQ_CLK_UART4_ROOT],
+	NULL
+};
+
 static int imx8mq_clocks_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	void __iomem *base;
 	int err;
-	int i;
 
 	clks[IMX8MQ_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
 	clks[IMX8MQ_CLK_32K] = of_clk_get_by_name(np, "ckil");
@@ -358,9 +368,9 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MQ_SYS2_PLL_1000M] = imx_clk_fixed_factor("sys2_pll_1000m", "sys2_pll_out", 1, 1);
 
 	np = dev->of_node;
-	base = of_iomap(np, 0);
-	if (WARN_ON(!base))
-		return -ENOMEM;
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (WARN_ON(IS_ERR(base)))
+		return PTR_ERR(base);
 
 	/* CORE */
 	clks[IMX8MQ_CLK_A53_SRC] = imx_clk_mux2("arm_a53_src", base + 0x8000, 24, 3, imx8mq_a53_sels, ARRAY_SIZE(imx8mq_a53_sels));
@@ -442,6 +452,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MQ_CLK_UART4] = imx8m_clk_composite("uart4", imx8mq_uart4_sels, base + 0xb080);
 	clks[IMX8MQ_CLK_USB_CORE_REF] = imx8m_clk_composite("usb_core_ref", imx8mq_usb_core_sels, base + 0xb100);
 	clks[IMX8MQ_CLK_USB_PHY_REF] = imx8m_clk_composite("usb_phy_ref", imx8mq_usb_phy_sels, base + 0xb180);
+	clks[IMX8MQ_CLK_GIC] = imx8m_clk_composite_critical("gic", imx8mq_gic_sels, base + 0xb200);
 	clks[IMX8MQ_CLK_ECSPI1] = imx8m_clk_composite("ecspi1", imx8mq_ecspi1_sels, base + 0xb280);
 	clks[IMX8MQ_CLK_ECSPI2] = imx8m_clk_composite("ecspi2", imx8mq_ecspi2_sels, base + 0xb300);
 	clks[IMX8MQ_CLK_PWM1] = imx8m_clk_composite("pwm1", imx8mq_pwm1_sels, base + 0xb380);
@@ -507,6 +518,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	clks[IMX8MQ_CLK_SAI5_IPG] = imx_clk_gate2_shared2("sai5_ipg_clk", "ipg_audio_root", base + 0x4370, 0, &share_count_sai5);
 	clks[IMX8MQ_CLK_SAI6_ROOT] = imx_clk_gate2_shared2("sai6_root_clk", "sai6", base + 0x4380, 0, &share_count_sai6);
 	clks[IMX8MQ_CLK_SAI6_IPG] = imx_clk_gate2_shared2("sai6_ipg_clk", "ipg_audio_root", base + 0x4380, 0, &share_count_sai6);
+	clks[IMX8MQ_CLK_SNVS_ROOT] = imx_clk_gate4("snvs_root_clk", "ipg_root", base + 0x4470, 0);
 	clks[IMX8MQ_CLK_UART1_ROOT] = imx_clk_gate4("uart1_root_clk", "uart1", base + 0x4490, 0);
 	clks[IMX8MQ_CLK_UART2_ROOT] = imx_clk_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0);
 	clks[IMX8MQ_CLK_UART3_ROOT] = imx_clk_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0);
@@ -543,10 +555,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 					   clks[IMX8MQ_ARM_PLL_OUT],
 					   clks[IMX8MQ_SYS1_PLL_800M]);
 
-	for (i = 0; i < IMX8MQ_CLK_END; i++)
-		if (IS_ERR(clks[i]))
-			pr_err("i.MX8mq clk %u register failed with %ld\n",
-			       i, PTR_ERR(clks[i]));
+	imx_check_clocks(clks, ARRAY_SIZE(clks));
 
 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);
@@ -554,6 +563,8 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	err = of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 	WARN_ON(err);
 
+	imx_register_uart_clocks(uart_clks);
+
 	return err;
 }
 

drivers/clk/imx/clk-pfd.c

@@ -121,12 +121,13 @@ static const struct clk_ops clk_pfd_ops = {
 	.is_enabled     = clk_pfd_is_enabled,
 };
 
-struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+struct clk_hw *imx_clk_hw_pfd(const char *name, const char *parent_name,
 			void __iomem *reg, u8 idx)
 {
 	struct clk_pfd *pfd;
-	struct clk *clk;
+	struct clk_hw *hw;
 	struct clk_init_data init;
+	int ret;
 
 	pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
 	if (!pfd)
@@ -142,10 +143,13 @@ struct clk *imx_clk_pfd(const char *name, const char *parent_name,
 	init.num_parents = 1;
 
 	pfd->hw.init = &init;
+	hw = &pfd->hw;
 
-	clk = clk_register(NULL, &pfd->hw);
-	if (IS_ERR(clk))
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
 		kfree(pfd);
+		return ERR_PTR(ret);
+	}
 
-	return clk;
+	return hw;
 }

drivers/clk/imx/clk-pllv3.c

@@ -410,14 +410,15 @@ static const struct clk_ops clk_pllv3_enet_ops = {
 	.recalc_rate	= clk_pllv3_enet_recalc_rate,
 };
 
-struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
 			  const char *parent_name, void __iomem *base,
 			  u32 div_mask)
 {
 	struct clk_pllv3 *pll;
 	const struct clk_ops *ops;
-	struct clk *clk;
+	struct clk_hw *hw;
 	struct clk_init_data init;
+	int ret;
 
 	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
 	if (!pll)
@@ -478,10 +479,13 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
 	init.num_parents = 1;
 
 	pll->hw.init = &init;
+	hw = &pll->hw;
 
-	clk = clk_register(NULL, &pll->hw);
-	if (IS_ERR(clk))
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
 		kfree(pll);
+		return ERR_PTR(ret);
+	}
 
-	return clk;
+	return hw;
 }

drivers/clk/imx/clk.c

 // SPDX-License-Identifier: GPL-2.0
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
+#include <linux/io.h>
 #include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include "clk.h"
 
+#define CCM_CCDR			0x4
+#define CCDR_MMDC_CH0_MASK		BIT(17)
+#define CCDR_MMDC_CH1_MASK		BIT(16)
+
 DEFINE_SPINLOCK(imx_ccm_lock);
 
-void __init imx_check_clocks(struct clk *clks[], unsigned int count)
+void __init imx_mmdc_mask_handshake(void __iomem *ccm_base,
+				    unsigned int chn)
+{
+	unsigned int reg;
+
+	reg = readl_relaxed(ccm_base + CCM_CCDR);
+	reg |= chn == 0 ? CCDR_MMDC_CH0_MASK : CCDR_MMDC_CH1_MASK;
+	writel_relaxed(reg, ccm_base + CCM_CCDR);
+}
+
+void imx_check_clocks(struct clk *clks[], unsigned int count)
 {
 	unsigned i;
 
@@ -59,6 +75,17 @@ struct clk * __init imx_obtain_fixed_clock(
 	return clk;
 }
 
+struct clk_hw * __init imx_obtain_fixed_clock_hw(
+			const char *name, unsigned long rate)
+{
+	struct clk *clk;
+
+	clk = imx_obtain_fixed_clock_from_dt(name);
+	if (IS_ERR(clk))
+		clk = imx_clk_fixed(name, rate);
+	return __clk_get_hw(clk);
+}
+
 struct clk_hw * __init imx_obtain_fixed_clk_hw(struct device_node *np,
 					       const char *name)
 {
@@ -97,8 +124,8 @@ void imx_cscmr1_fixup(u32 *val)
 	return;
 }
 
-static int imx_keep_uart_clocks __initdata;
-static struct clk ** const *imx_uart_clocks __initdata;
+static int imx_keep_uart_clocks;
+static struct clk ** const *imx_uart_clocks;
 
 static int __init imx_keep_uart_clocks_param(char *str)
 {
@@ -111,7 +138,7 @@ __setup_param("earlycon", imx_keep_uart_earlycon,
 __setup_param("earlyprintk", imx_keep_uart_earlyprintk,
 	      imx_keep_uart_clocks_param, 0);
 
-void __init imx_register_uart_clocks(struct clk ** const clks[])
+void imx_register_uart_clocks(struct clk ** const clks[])
 {
 	if (imx_keep_uart_clocks) {
 		int i;

drivers/clk/ingenic/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_INGENIC_CGU_COMMON)	+= cgu.o
+obj-$(CONFIG_INGENIC_CGU_COMMON)	+= cgu.o pm.o
 obj-$(CONFIG_INGENIC_CGU_JZ4740)	+= jz4740-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4725B)	+= jz4725b-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4770)	+= jz4770-cgu.o

drivers/clk/ingenic/cgu.c

@@ -375,8 +375,11 @@ ingenic_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 		div_reg = readl(cgu->base + clk_info->div.reg);
 		div = (div_reg >> clk_info->div.shift) &
 		      GENMASK(clk_info->div.bits - 1, 0);
-		div += 1;
-		div *= clk_info->div.div;
+
+		if (clk_info->div.div_table)
+			div = clk_info->div.div_table[div];
+		else
+			div = (div + 1) * clk_info->div.div;
 
 		rate /= div;
 	} else if (clk_info->type & CGU_CLK_FIXDIV) {
@@ -386,16 +389,37 @@ ingenic_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	return rate;
 }
 
+static unsigned int
+ingenic_clk_calc_hw_div(const struct ingenic_cgu_clk_info *clk_info,
+			unsigned int div)
+{
+	unsigned int i;
+
+	for (i = 0; i < (1 << clk_info->div.bits)
+				&& clk_info->div.div_table[i]; i++) {
+		if (clk_info->div.div_table[i] >= div)
+			return i;
+	}
+
+	return i - 1;
+}
+
 static unsigned
 ingenic_clk_calc_div(const struct ingenic_cgu_clk_info *clk_info,
 		     unsigned long parent_rate, unsigned long req_rate)
 {
-	unsigned div;
+	unsigned int div, hw_div;
 
 	/* calculate the divide */
 	div = DIV_ROUND_UP(parent_rate, req_rate);
 
-	/* and impose hardware constraints */
+	if (clk_info->div.div_table) {
+		hw_div = ingenic_clk_calc_hw_div(clk_info, div);
+
+		return clk_info->div.div_table[hw_div];
+	}
+
+	/* Impose hardware constraints */
 	div = min_t(unsigned, div, 1 << clk_info->div.bits);
 	div = max_t(unsigned, div, 1);
 
@@ -438,7 +462,7 @@ ingenic_clk_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	const struct ingenic_cgu_clk_info *clk_info;
 	const unsigned timeout = 100;
 	unsigned long rate, flags;
-	unsigned div, i;
+	unsigned int hw_div, div, i;
 	u32 reg, mask;
 	int ret = 0;
 
@@ -451,13 +475,18 @@ ingenic_clk_set_rate(struct clk_hw *hw, unsigned long req_rate,
 		if (rate != req_rate)
 			return -EINVAL;
 
+		if (clk_info->div.div_table)
+			hw_div = ingenic_clk_calc_hw_div(clk_info, div);
+		else
+			hw_div = ((div / clk_info->div.div) - 1);
+
 		spin_lock_irqsave(&cgu->lock, flags);
 		reg = readl(cgu->base + clk_info->div.reg);
 
 		/* update the divide */
 		mask = GENMASK(clk_info->div.bits - 1, 0);
 		reg &= ~(mask << clk_info->div.shift);
-		reg |= ((div / clk_info->div.div) - 1) << clk_info->div.shift;
+		reg |= hw_div << clk_info->div.shift;
 
 		/* clear the stop bit */
 		if (clk_info->div.stop_bit != -1)

drivers/clk/ingenic/cgu.h

@@ -10,6 +10,7 @@
 #define __DRIVERS_CLK_INGENIC_CGU_H__
 
 #include <linux/bitops.h>
+#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/spinlock.h>
 
@@ -79,6 +80,8 @@ struct ingenic_cgu_mux_info {
  *          isn't one
  * @busy_bit: the index of the busy bit within reg, or -1 if there isn't one
  * @stop_bit: the index of the stop bit within reg, or -1 if there isn't one
+ * @div_table: optional table to map the value read from the register to the
+ *             actual divider value
  */
 struct ingenic_cgu_div_info {
 	unsigned reg;
@@ -88,6 +91,7 @@ struct ingenic_cgu_div_info {
 	s8 ce_bit;
 	s8 busy_bit;
 	s8 stop_bit;
+	const u8 *div_table;
 };
 
 /**

drivers/clk/ingenic/jz4725b-cgu.c

@@ -11,6 +11,7 @@
 #include <linux/of.h>
 #include <dt-bindings/clock/jz4725b-cgu.h>
 #include "cgu.h"
+#include "pm.h"
 
 /* CGU register offsets */
 #define CGU_REG_CPCCR		0x00
@@ -33,6 +34,14 @@ static const s8 pll_od_encoding[4] = {
 	0x0, 0x1, -1, 0x3,
 };
 
+static const u8 jz4725b_cgu_cpccr_div_table[] = {
+	1, 2, 3, 4, 6, 8,
+};
+
+static const u8 jz4725b_cgu_pll_half_div_table[] = {
+	2, 1,
+};
+
 static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 
 	/* External clocks */
@@ -66,37 +75,55 @@ static const struct ingenic_cgu_clk_info jz4725b_cgu_clocks[] = {
 	[JZ4725B_CLK_PLL_HALF] = {
 		"pll half", CGU_CLK_DIV,
 		.parents = { JZ4725B_CLK_PLL, -1, -1, -1 },
-		.div = { CGU_REG_CPCCR, 21, 1, 1, -1, -1, -1 },
+		.div = {
+			CGU_REG_CPCCR, 21, 1, 1, -1, -1, -1,
+			jz4725b_cgu_pll_half_div_table,
+		},
 	},
 
 	[JZ4725B_CLK_CCLK] = {
 		"cclk", CGU_CLK_DIV,
 		.parents = { JZ4725B_CLK_PLL, -1, -1, -1 },
-		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
+		.div = {
+			CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1,
+			jz4725b_cgu_cpccr_div_table,
+		},
 	},
 
 	[JZ4725B_CLK_HCLK] = {
 		"hclk", CGU_CLK_DIV,
 		.parents = { JZ4725B_CLK_PLL, -1, -1, -1 },
-		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
+		.div = {
+			CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1,
+			jz4725b_cgu_cpccr_div_table,
+		},
 	},
 
 	[JZ4725B_CLK_PCLK] = {
 		"pclk", CGU_CLK_DIV,
 		.parents = { JZ4725B_CLK_PLL, -1, -1, -1 },
-		.div = { CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1 },
+		.div = {
+			CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1,
+			jz4725b_cgu_cpccr_div_table,
+		},
 	},
 
 	[JZ4725B_CLK_MCLK] = {
 		"mclk", CGU_CLK_DIV,
 		.parents = { JZ4725B_CLK_PLL, -1, -1, -1 },
-		.div = { CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1 },
+		.div = {
+			CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1,
+			jz4725b_cgu_cpccr_div_table,
+		},
 	},
 
 	[JZ4725B_CLK_IPU] = {
 		"ipu", CGU_CLK_DIV | CGU_CLK_GATE,
 		.parents = { JZ4725B_CLK_PLL, -1, -1, -1 },
-		.div = { CGU_REG_CPCCR, 16, 1, 4, 22, -1, -1 },
+		.div = {
+			CGU_REG_CPCCR, 16, 1, 4, 22, -1, -1,
+			jz4725b_cgu_cpccr_div_table,
+		},
 		.gate = { CGU_REG_CLKGR, 13 },
 	},
 
@@ -227,5 +254,7 @@ static void __init jz4725b_cgu_init(struct device_node *np)
 	retval = ingenic_cgu_register_clocks(cgu);
 	if (retval)
 		pr_err("%s: failed to register CGU Clocks\n", __func__);
+
+	ingenic_cgu_register_syscore_ops(cgu);
 }
 CLK_OF_DECLARE(jz4725b_cgu, "ingenic,jz4725b-cgu", jz4725b_cgu_init);

drivers/clk/ingenic/jz4780-cgu.c

@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <dt-bindings/clock/jz4780-cgu.h>
 #include "cgu.h"
+#include "pm.h"
 
 /* CGU register offsets */
 #define CGU_REG_CLOCKCONTROL	0x00
@@ -721,5 +722,7 @@ static void __init jz4780_cgu_init(struct device_node *np)
 		pr_err("%s: failed to register CGU Clocks\n", __func__);
 		return;
 	}
+
+	ingenic_cgu_register_syscore_ops(cgu);
 }
 CLK_OF_DECLARE(jz4780_cgu, "ingenic,jz4780-cgu", jz4780_cgu_init);

drivers/clk/ingenic/pm.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ */
+#ifndef DRIVERS_CLK_INGENIC_PM_H
+#define DRIVERS_CLK_INGENIC_PM_H
+
+struct ingenic_cgu;
+
+void ingenic_cgu_register_syscore_ops(struct ingenic_cgu *cgu);
+
+#endif /* DRIVERS_CLK_INGENIC_PM_H */