tipc: fix link session and re-establish issues

When a link endpoint is re-created (e.g. after a node reboot or
interface reset), the link session number is varied by random, the peer
endpoint will be synced with this new session number before the link is
re-established.

However, there is a shortcoming in this mechanism that can lead to the
link never re-established or faced with a failure then. It happens when
the peer endpoint is ready in ESTABLISHING state, the 'peer_session' as
well as the 'in_session' flag have been set, but suddenly this link
endpoint leaves. When it comes back with a random session number, there
are two situations possible:

1/ If the random session number is larger than (or equal to) the
previous one, the peer endpoint will be updated with this new session
upon receipt of a RESET_MSG from this endpoint, and the link can be re-
established as normal. Otherwise, all the RESET_MSGs from this endpoint
will be rejected by the peer. In turn, when this link endpoint receives
one ACTIVATE_MSG from the peer, it will move to ESTABLISHED and start
to send STATE_MSGs, but again these messages will be dropped by the
peer due to wrong session.
The peer link endpoint can still become ESTABLISHED after receiving a
traffic message from this endpoint (e.g. a BCAST_PROTOCOL or
NAME_DISTRIBUTOR), but since all the STATE_MSGs are invalid, the link
will be forced down sooner or later!

Even in case the random session number is larger than the previous one,
it can be that the ACTIVATE_MSG from the peer arrives first, and this
link endpoint moves quickly to ESTABLISHED without sending out any
RESET_MSG yet. Consequently, the peer link will not be updated with the
new session number, and the same link failure scenario as above will
happen.

2/ Another situation can be that, the peer link endpoint was reset due
to any reasons in the meantime, its link state was set to RESET from
ESTABLISHING but still in session, i.e. the 'in_session' flag is not
reset...
Now, if the random session number from this endpoint is less than the
previous one, all the RESET_MSGs from this endpoint will be rejected by
the peer. In the other direction, when this link endpoint receives a
RESET_MSG from the peer, it moves to ESTABLISHING and starts to send
ACTIVATE_MSGs, but all these messages will be rejected by the peer too.
As a result, the link cannot be re-established but gets stuck with this
link endpoint in state ESTABLISHING and the peer in RESET!

Solution:

===========

This link endpoint should not go directly to ESTABLISHED when getting
ACTIVATE_MSG from the peer which may belong to the old session if the
link was re-created. To ensure the session to be correct before the
link is re-established, the peer endpoint in ESTABLISHING state will
send back the last session number in ACTIVATE_MSG for a verification at
this endpoint. Then, if needed, a new and more appropriate session
number will be regenerated to force a re-synch first.

In addition, when a link in ESTABLISHING state is reset, its state will
move to RESET according to the link FSM, along with resetting the
'in_session' flag (and the other data) as a normal link reset, it will
also be deleted if requested.

The solution is backward compatible.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/tipc/link.c

@@ -1425,6 +1425,10 @@ static void tipc_link_build_proto_msg(struct tipc_link *l, int mtyp, bool probe,
 		l->rcv_unacked = 0;
 	} else {
 		/* RESET_MSG or ACTIVATE_MSG */
+		if (mtyp == ACTIVATE_MSG) {
+			msg_set_dest_session_valid(hdr, 1);
+			msg_set_dest_session(hdr, l->peer_session);
+		}
 		msg_set_max_pkt(hdr, l->advertised_mtu);
 		strcpy(data, l->if_name);
 		msg_set_size(hdr, INT_H_SIZE + TIPC_MAX_IF_NAME);
@@ -1642,6 +1646,17 @@ static int tipc_link_proto_rcv(struct tipc_link *l, struct sk_buff *skb,
 			rc = tipc_link_fsm_evt(l, LINK_FAILURE_EVT);
 			break;
 		}
+
+		/* If this endpoint was re-created while peer was ESTABLISHING
+		 * it doesn't know current session number. Force re-synch.
+		 */
+		if (mtyp == ACTIVATE_MSG && msg_dest_session_valid(hdr) &&
+		    l->session != msg_dest_session(hdr)) {
+			if (less(l->session, msg_dest_session(hdr)))
+				l->session = msg_dest_session(hdr) + 1;
+			break;
+		}
+
 		/* ACTIVATE_MSG serves as PEER_RESET if link is already down */
 		if (mtyp == RESET_MSG || !link_is_up(l))
 			rc = tipc_link_fsm_evt(l, LINK_PEER_RESET_EVT);

net/tipc/msg.h

@@ -360,6 +360,28 @@ static inline void msg_set_bcast_ack(struct tipc_msg *m, u16 n)
 	msg_set_bits(m, 1, 0, 0xffff, n);
 }
 
+/* Note: reusing bits in word 1 for ACTIVATE_MSG only, to re-synch
+ * link peer session number
+ */
+static inline bool msg_dest_session_valid(struct tipc_msg *m)
+{
+	return msg_bits(m, 1, 16, 0x1);
+}
+
+static inline void msg_set_dest_session_valid(struct tipc_msg *m, bool valid)
+{
+	msg_set_bits(m, 1, 16, 0x1, valid);
+}
+
+static inline u16 msg_dest_session(struct tipc_msg *m)
+{
+	return msg_bits(m, 1, 0, 0xffff);
+}
+
+static inline void msg_set_dest_session(struct tipc_msg *m, u16 n)
+{
+	msg_set_bits(m, 1, 0, 0xffff, n);
+}
 
 /*
  * Word 2

net/tipc/node.c

@@ -830,15 +830,16 @@ static void tipc_node_link_down(struct tipc_node *n, int bearer_id, bool delete)
 	tipc_node_write_lock(n);
 	if (!tipc_link_is_establishing(l)) {
 		__tipc_node_link_down(n, &bearer_id, &xmitq, &maddr);
+	} else {
+		/* Defuse pending tipc_node_link_up() */
+		tipc_link_reset(l);
+		tipc_link_fsm_evt(l, LINK_RESET_EVT);
+	}
 	if (delete) {
 		kfree(l);
 		le->link = NULL;
 		n->link_cnt--;
 	}
-	} else {
-		/* Defuse pending tipc_node_link_up() */
-		tipc_link_fsm_evt(l, LINK_RESET_EVT);
-	}
 	trace_tipc_node_link_down(n, true, "node link down or deleted!");
 	tipc_node_write_unlock(n);
 	if (delete)