arm64: dts: Fix dtc interrupt_provider warnings

The dtc interrupt_provider warning is off by default. Fix all the warnings
so it can be enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-3-f2dee1292525@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/amazon/alpine-v2.dtsi

@@ -145,7 +145,6 @@ pci@fbc00000 {
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;

arch/arm64/boot/dts/amazon/alpine-v3.dtsi

@@ -355,7 +355,6 @@ pcie@fbd00000 {
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;

arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi

@@ -586,6 +586,7 @@ gpio_g: gpio@660a0000 {
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 

arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi

@@ -450,6 +450,7 @@ gpio_hsls: gpio@d0000 {
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,

arch/arm64/boot/dts/lg/lg1312.dtsi

@@ -126,7 +126,6 @@ eth0: ethernet@c1b00000 {
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;

arch/arm64/boot/dts/lg/lg1313.dtsi

@@ -126,7 +126,6 @@ eth0: ethernet@c3700000 {
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;

arch/arm64/boot/dts/marvell/armada-ap80x.dtsi

@@ -138,7 +138,6 @@ pmu {
 
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
-				interrupt-controller;
 				msi-controller;
 				marvell,odmi-frames = <4>;
 				reg = <0x300000 0x4000>,

arch/arm64/boot/dts/mediatek/mt8195-demo.dts

@@ -128,6 +128,7 @@ mt6360: pmic@34 {
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 

arch/arm64/boot/dts/renesas/ulcb-kf.dtsi

@@ -234,6 +234,7 @@ gpio_exp_74: gpio@74 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 
@@ -294,6 +295,7 @@ gpio_exp_75: gpio@75 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -314,6 +316,7 @@ gpio_exp_76: gpio@76 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -324,6 +327,7 @@ gpio_exp_77: gpio@77 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 	};