dmaengine: idxd: set defaults for wq configs

Add default values for wq size, max_xfer_size and max_batch_size. These
values should provide a general guidance for the wq configuration when
the user does not specify any specific values.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528473483.3926048.7950067926287180976.stgit@djiang5-desk3.ch.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/dma/idxd/device.c

@@ -390,6 +390,8 @@ static void idxd_wq_disable_cleanup(struct idxd_wq *wq)
 	clear_bit(WQ_FLAG_DEDICATED, &wq->flags);
 	clear_bit(WQ_FLAG_BLOCK_ON_FAULT, &wq->flags);
 	memset(wq->name, 0, WQ_NAME_SIZE);
+	wq->max_xfer_bytes = WQ_DEFAULT_MAX_XFER;
+	wq->max_batch_size = WQ_DEFAULT_MAX_BATCH;
 }
 
 static void idxd_wq_ref_release(struct percpu_ref *ref)
@@ -839,15 +841,12 @@ static int idxd_wq_config_write(struct idxd_wq *wq)
 		wq->wqcfg->bits[i] = ioread32(idxd->reg_base + wq_offset);
 	}
 
+	if (wq->size == 0 && wq->type != IDXD_WQT_NONE)
+		wq->size = WQ_DEFAULT_QUEUE_DEPTH;
+
 	/* byte 0-3 */
 	wq->wqcfg->wq_size = wq->size;
 
-	if (wq->size == 0) {
-		idxd->cmd_status = IDXD_SCMD_WQ_NO_SIZE;
-		dev_warn(dev, "Incorrect work queue size: 0\n");
-		return -EINVAL;
-	}
-
 	/* bytes 4-7 */
 	wq->wqcfg->wq_thresh = wq->threshold;
 
@@ -993,8 +992,6 @@ static int idxd_wqs_setup(struct idxd_device *idxd)
 
 		if (!wq->group)
 			continue;
-		if (!wq->size)
-			continue;
 
 		if (wq_shared(wq) && !device_swq_supported(idxd)) {
 			idxd->cmd_status = IDXD_SCMD_WQ_NO_SWQ_SUPPORT;

drivers/dma/idxd/idxd.h

@@ -150,6 +150,10 @@ struct idxd_cdev {
 #define WQ_NAME_SIZE   1024
 #define WQ_TYPE_SIZE   10
 
+#define WQ_DEFAULT_QUEUE_DEPTH		16
+#define WQ_DEFAULT_MAX_XFER		SZ_2M
+#define WQ_DEFAULT_MAX_BATCH		32
+
 enum idxd_op_type {
 	IDXD_OP_BLOCK = 0,
 	IDXD_OP_NONBLOCK = 1,

drivers/dma/idxd/init.c

@@ -246,8 +246,8 @@ static int idxd_setup_wqs(struct idxd_device *idxd)
 		init_waitqueue_head(&wq->err_queue);
 		init_completion(&wq->wq_dead);
 		init_completion(&wq->wq_resurrect);
-		wq->max_xfer_bytes = idxd->max_xfer_bytes;
-		wq->max_batch_size = idxd->max_batch_size;
+		wq->max_xfer_bytes = WQ_DEFAULT_MAX_XFER;
+		wq->max_batch_size = WQ_DEFAULT_MAX_BATCH;
 		wq->wqcfg = kzalloc_node(idxd->wqcfg_size, GFP_KERNEL, dev_to_node(dev));
 		if (!wq->wqcfg) {
 			put_device(conf_dev);