PCI: dwc: Use FIELD_GET/PREP()

Convert open-coded variants of PCI field access into FIELD_GET/PREP()
to make the code easier to understand.

Add two missing defines into pci_regs.h. Logically, the Max No-Snoop
Latency Register is a separate word sized register in the PCIe spec,
but the pre-existing LTR defines in pci_regs.h with dword long values
seem to consider the registers together (the same goes for the only
user). Thus, follow the custom and make the new values also take both
word long LTR registers as a joint dword register.

Link: https://lore.kernel.org/r/20231024110336.26264-1-ilpo.jarvinen@linux.intel.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

drivers/pci/controller/dwc/pcie-designware-ep.c

@@ -6,6 +6,7 @@
  * Author: Kishon Vijay Abraham I <kishon@ti.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 
@@ -334,7 +335,7 @@ static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
 	if (!(val & PCI_MSI_FLAGS_ENABLE))
 		return -EINVAL;
 
-	val = (val & PCI_MSI_FLAGS_QSIZE) >> 4;
+	val = FIELD_GET(PCI_MSI_FLAGS_QSIZE, val);
 
 	return val;
 }
@@ -357,7 +358,7 @@ static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 	reg = ep_func->msi_cap + func_offset + PCI_MSI_FLAGS;
 	val = dw_pcie_readw_dbi(pci, reg);
 	val &= ~PCI_MSI_FLAGS_QMASK;
-	val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK;
+	val |= FIELD_PREP(PCI_MSI_FLAGS_QMASK, interrupts);
 	dw_pcie_dbi_ro_wr_en(pci);
 	dw_pcie_writew_dbi(pci, reg, val);
 	dw_pcie_dbi_ro_wr_dis(pci);
@@ -584,7 +585,7 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 
 	reg = ep_func->msix_cap + func_offset + PCI_MSIX_TABLE;
 	tbl_offset = dw_pcie_readl_dbi(pci, reg);
-	bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
+	bir = FIELD_GET(PCI_MSIX_TABLE_BIR, tbl_offset);
 	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
 
 	msix_tbl = ep->epf_bar[bir]->addr + tbl_offset;

drivers/pci/controller/dwc/pcie-tegra194.c

@@ -126,7 +126,7 @@
 
 #define APPL_LTR_MSG_1				0xC4
 #define LTR_MSG_REQ				BIT(15)
-#define LTR_MST_NO_SNOOP_SHIFT			16
+#define LTR_NOSNOOP_MSG_REQ			BIT(31)
 
 #define APPL_LTR_MSG_2				0xC8
 #define APPL_LTR_MSG_2_LTR_MSG_REQ_STATE	BIT(3)
@@ -496,8 +496,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
 		ktime_t timeout;
 
 		/* 110us for both snoop and no-snoop */
-		val = 110 | (2 << PCI_LTR_SCALE_SHIFT) | LTR_MSG_REQ;
-		val |= (val << LTR_MST_NO_SNOOP_SHIFT);
+		val = FIELD_PREP(PCI_LTR_VALUE_MASK, 110) |
+		      FIELD_PREP(PCI_LTR_SCALE_MASK, 2) |
+		      LTR_MSG_REQ |
+		      FIELD_PREP(PCI_LTR_NOSNOOP_VALUE, 110) |
+		      FIELD_PREP(PCI_LTR_NOSNOOP_SCALE, 2) |
+		      LTR_NOSNOOP_MSG_REQ;
 		appl_writel(pcie, val, APPL_LTR_MSG_1);
 
 		/* Send LTR upstream */

include/uapi/linux/pci_regs.h

@@ -975,6 +975,8 @@
 #define  PCI_LTR_VALUE_MASK	0x000003ff
 #define  PCI_LTR_SCALE_MASK	0x00001c00
 #define  PCI_LTR_SCALE_SHIFT	10
+#define  PCI_LTR_NOSNOOP_VALUE	0x03ff0000 /* Max No-Snoop Latency Value */
+#define  PCI_LTR_NOSNOOP_SCALE	0x1c000000 /* Scale for Max Value */
 #define PCI_EXT_CAP_LTR_SIZEOF	8
 
 /* Access Control Service */