powercap: intel_rapl: support new layout of Psys PowerLimit Register on SPR

On Sapphire Rapids, the layout of the Psys domain Power Limit Register
is different from from what it was before.

Enhance the code to support the new Psys PL register layout.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reported-and-tested-by: Alkattan Dana <dana.alkattan@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/powercap/intel_rapl_common.c

@@ -61,6 +61,20 @@
 #define PERF_STATUS_THROTTLE_TIME_MASK 0xffffffff
 #define PP_POLICY_MASK         0x1F
 
+/*
+ * SPR has different layout for Psys Domain PowerLimit registers.
+ * There are 17 bits of PL1 and PL2 instead of 15 bits.
+ * The Enable bits and TimeWindow bits are also shifted as a result.
+ */
+#define PSYS_POWER_LIMIT1_MASK       0x1FFFF
+#define PSYS_POWER_LIMIT1_ENABLE     BIT(17)
+
+#define PSYS_POWER_LIMIT2_MASK       (0x1FFFFULL<<32)
+#define PSYS_POWER_LIMIT2_ENABLE     BIT_ULL(49)
+
+#define PSYS_TIME_WINDOW1_MASK       (0x7FULL<<19)
+#define PSYS_TIME_WINDOW2_MASK       (0x7FULL<<51)
+
 /* Non HW constants */
 #define RAPL_PRIMITIVE_DERIVED       BIT(1)	/* not from raw data */
 #define RAPL_PRIMITIVE_DUMMY         BIT(2)
@@ -97,6 +111,7 @@ struct rapl_defaults {
 				    bool to_raw);
 	unsigned int dram_domain_energy_unit;
 	unsigned int psys_domain_energy_unit;
+	bool spr_psys_bits;
 };
 static struct rapl_defaults *rapl_defaults;
 
@@ -669,12 +684,51 @@ static struct rapl_primitive_info rpi[] = {
 			    RAPL_DOMAIN_REG_PERF, TIME_UNIT, 0),
 	PRIMITIVE_INFO_INIT(PRIORITY_LEVEL, PP_POLICY_MASK, 0,
 			    RAPL_DOMAIN_REG_POLICY, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_POWER_LIMIT1, PSYS_POWER_LIMIT1_MASK, 0,
+			    RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_POWER_LIMIT2, PSYS_POWER_LIMIT2_MASK, 32,
+			    RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_PL1_ENABLE, PSYS_POWER_LIMIT1_ENABLE, 17,
+			    RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_PL2_ENABLE, PSYS_POWER_LIMIT2_ENABLE, 49,
+			    RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_TIME_WINDOW1, PSYS_TIME_WINDOW1_MASK, 19,
+			    RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_TIME_WINDOW2, PSYS_TIME_WINDOW2_MASK, 51,
+			    RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0),
 	/* non-hardware */
 	PRIMITIVE_INFO_INIT(AVERAGE_POWER, 0, 0, 0, POWER_UNIT,
 			    RAPL_PRIMITIVE_DERIVED),
 	{NULL, 0, 0, 0},
 };
 
+static enum rapl_primitives
+prim_fixups(struct rapl_domain *rd, enum rapl_primitives prim)
+{
+	if (!rapl_defaults->spr_psys_bits)
+		return prim;
+
+	if (rd->id != RAPL_DOMAIN_PLATFORM)
+		return prim;
+
+	switch (prim) {
+	case POWER_LIMIT1:
+		return PSYS_POWER_LIMIT1;
+	case POWER_LIMIT2:
+		return PSYS_POWER_LIMIT2;
+	case PL1_ENABLE:
+		return PSYS_PL1_ENABLE;
+	case PL2_ENABLE:
+		return PSYS_PL2_ENABLE;
+	case TIME_WINDOW1:
+		return PSYS_TIME_WINDOW1;
+	case TIME_WINDOW2:
+		return PSYS_TIME_WINDOW2;
+	default:
+		return prim;
+	}
+}
+
 /* Read primitive data based on its related struct rapl_primitive_info.
  * if xlate flag is set, return translated data based on data units, i.e.
  * time, energy, and power.
@@ -692,7 +746,8 @@ static int rapl_read_data_raw(struct rapl_domain *rd,
 			      enum rapl_primitives prim, bool xlate, u64 *data)
 {
 	u64 value;
-	struct rapl_primitive_info *rp = &rpi[prim];
+	enum rapl_primitives prim_fixed = prim_fixups(rd, prim);
+	struct rapl_primitive_info *rp = &rpi[prim_fixed];
 	struct reg_action ra;
 	int cpu;
 
@@ -738,7 +793,8 @@ static int rapl_write_data_raw(struct rapl_domain *rd,
 			       enum rapl_primitives prim,
 			       unsigned long long value)
 {
-	struct rapl_primitive_info *rp = &rpi[prim];
+	enum rapl_primitives prim_fixed = prim_fixups(rd, prim);
+	struct rapl_primitive_info *rp = &rpi[prim_fixed];
 	int cpu;
 	u64 bits;
 	struct reg_action ra;
@@ -981,6 +1037,7 @@ static const struct rapl_defaults rapl_defaults_spr_server = {
 	.compute_time_window = rapl_compute_time_window_core,
 	.dram_domain_energy_unit = 15300,
 	.psys_domain_energy_unit = 1000000000,
+	.spr_psys_bits = true,
 };
 
 static const struct rapl_defaults rapl_defaults_byt = {

include/linux/intel_rapl.h

@@ -58,6 +58,12 @@ enum rapl_primitives {
 	THROTTLED_TIME,
 	PRIORITY_LEVEL,
 
+	PSYS_POWER_LIMIT1,
+	PSYS_POWER_LIMIT2,
+	PSYS_PL1_ENABLE,
+	PSYS_PL2_ENABLE,
+	PSYS_TIME_WINDOW1,
+	PSYS_TIME_WINDOW2,
 	/* below are not raw primitive data */
 	AVERAGE_POWER,
 	NR_RAPL_PRIMITIVES,