ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers

The MMC0 controllers have only one muxing option in the SoC. In such a
case, we can just move the muxing into the DTSI, and remove it from
the DTS.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>

arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts

@@ -78,8 +78,6 @@ red_led {
 };
 
 &mmc0 {
-	pinctrl-0 = <&mmc0_pins>;
-	pinctrl-names = "default";
 	broken-cd;
 	bus-width = <4>;
 	vmmc-supply = <&reg_vcc3v3>;

arch/arm/boot/dts/sun8i-v3s.dtsi

@@ -192,6 +192,8 @@ mmc0: mmc@1c0f000 {
 			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;