mwifiex: add support for SD8987 chipset

This patch adds support for Marvell 88W8987 chipset with SDIO interface.
Register offsets and supported feature flags are updated. The corresponding
firmware image file shall be "mrvl/sd8987_uapsta.bin".
Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/marvell/mwifiex/Kconfig

@@ -9,13 +9,13 @@ config MWIFIEX
 	  mwifiex.
 
 config MWIFIEX_SDIO
-	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997"
+	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997"
 	depends on MWIFIEX && MMC
 	select FW_LOADER
 	select WANT_DEV_COREDUMP
 	---help---
 	  This adds support for wireless adapters based on Marvell
-	  8786/8787/8797/8887/8897/8997 chipsets with SDIO interface.
+	  8786/8787/8797/8887/8897/8977/8987/8997 chipsets with SDIO interface.
 
 	  If you choose to build it as a module, it will be called
 	  mwifiex_sdio.

drivers/net/wireless/marvell/mwifiex/sdio.c

@@ -491,6 +491,8 @@ static void mwifiex_sdio_coredump(struct device *dev)
 #define SDIO_DEVICE_ID_MARVELL_8801   (0x9139)
 /* Device ID for SD8977 */
 #define SDIO_DEVICE_ID_MARVELL_8977   (0x9145)
+/* Device ID for SD8987 */
+#define SDIO_DEVICE_ID_MARVELL_8987   (0x9149)
 /* Device ID for SD8997 */
 #define SDIO_DEVICE_ID_MARVELL_8997   (0x9141)
 
@@ -511,6 +513,8 @@ static const struct sdio_device_id mwifiex_ids[] = {
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8977),
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8977},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8987),
+		.driver_data = (unsigned long)&mwifiex_sdio_sd8987},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997),
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8997},
 	{},
@@ -2731,4 +2735,5 @@ MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8977_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8987_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);

drivers/net/wireless/marvell/mwifiex/sdio.h

@@ -37,6 +37,7 @@
 #define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
 #define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
 #define SD8977_DEFAULT_FW_NAME "mrvl/sd8977_uapsta.bin"
+#define SD8987_DEFAULT_FW_NAME "mrvl/sd8987_uapsta.bin"
 #define SD8997_DEFAULT_FW_NAME "mrvl/sd8997_uapsta.bin"
 
 #define BLOCK_MODE	1
@@ -526,6 +527,58 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8887 = {
 				 0x68, 0x69, 0x6a},
 };
 
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8987 = {
+	.start_rd_port = 0,
+	.start_wr_port = 0,
+	.base_0_reg = 0xF8,
+	.base_1_reg = 0xF9,
+	.poll_reg = 0x5C,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+			CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+	.host_int_rsr_reg = 0x4,
+	.host_int_status_reg = 0x0C,
+	.host_int_mask_reg = 0x08,
+	.status_reg_0 = 0xE8,
+	.status_reg_1 = 0xE9,
+	.sdio_int_mask = 0xff,
+	.data_port_mask = 0xffffffff,
+	.io_port_0_reg = 0xE4,
+	.io_port_1_reg = 0xE5,
+	.io_port_2_reg = 0xE6,
+	.max_mp_regs = 196,
+	.rd_bitmap_l = 0x10,
+	.rd_bitmap_u = 0x11,
+	.rd_bitmap_1l = 0x12,
+	.rd_bitmap_1u = 0x13,
+	.wr_bitmap_l = 0x14,
+	.wr_bitmap_u = 0x15,
+	.wr_bitmap_1l = 0x16,
+	.wr_bitmap_1u = 0x17,
+	.rd_len_p0_l = 0x18,
+	.rd_len_p0_u = 0x19,
+	.card_misc_cfg_reg = 0xd8,
+	.card_cfg_2_1_reg = 0xd9,
+	.cmd_rd_len_0 = 0xc0,
+	.cmd_rd_len_1 = 0xc1,
+	.cmd_rd_len_2 = 0xc2,
+	.cmd_rd_len_3 = 0xc3,
+	.cmd_cfg_0 = 0xc4,
+	.cmd_cfg_1 = 0xc5,
+	.cmd_cfg_2 = 0xc6,
+	.cmd_cfg_3 = 0xc7,
+	.fw_dump_host_ready = 0xcc,
+	.fw_dump_ctrl = 0xf9,
+	.fw_dump_start = 0xf1,
+	.fw_dump_end = 0xf8,
+	.func1_dump_reg_start = 0x10,
+	.func1_dump_reg_end = 0x17,
+	.func1_scratch_reg = 0xE8,
+	.func1_spec_reg_num = 13,
+	.func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D, 0x60,
+				 0x61, 0x62, 0x64, 0x65, 0x66,
+				 0x68, 0x69, 0x6a},
+};
+
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
 	.firmware = SD8786_DEFAULT_FW_NAME,
 	.reg = &mwifiex_reg_sd87xx,
@@ -633,6 +686,22 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
 	.can_ext_scan = true,
 };
 
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8987 = {
+	.firmware = SD8987_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd8987,
+	.max_ports = 32,
+	.mp_agg_pkt_limit = 16,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+	.supports_sdio_new_mode = true,
+	.has_control_mask = false,
+	.can_dump_fw = true,
+	.fw_dump_enh = true,
+	.can_auto_tdls = true,
+	.can_ext_scan = true,
+};
+
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8801 = {
 	.firmware = SD8801_DEFAULT_FW_NAME,
 	.reg = &mwifiex_reg_sd87xx,