sh: Move out the solution engine headers to arch/sh/include/mach-se/

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/Kconfig

@@ -352,253 +352,10 @@ config CPU_SUBTYPE_SH5_103
 endchoice
 
 source "arch/sh/mm/Kconfig"
-source "arch/sh/Kconfig.cpu"
-
-menu "Board support"
-
-config SOLUTION_ENGINE
-	bool
-
-config SH_SOLUTION_ENGINE
-	bool "SolutionEngine"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
-	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
-	  CPU_SUBTYPE_SH7750R 
-	help
-	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
-	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
-	bool "SolutionEngine7206"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7206
-	help
-	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
-	  evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
-	bool "SolutionEngine7619"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7619
-	help
-	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
-	  evaluation board.
-	
-config SH_7721_SOLUTION_ENGINE
-	bool "SolutionEngine7721"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7721
-	help
-	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
-	  evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
-	bool "SolutionEngine7722"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
-	  evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
-	bool "SolutionEngine7751"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7751
-	help
-	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
-	  evaluation board.
-	  
-config SH_7780_SOLUTION_ENGINE
-	bool "SolutionEngine7780"
-	select SOLUTION_ENGINE
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7780
-	help
-	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
-	  evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
-	bool "SolutionEngine7343"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7343
-	help
-	  Select 7343 SolutionEngine if configuring for a Hitachi
-	  SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
-	bool "SystemH7751R"
-	depends on CPU_SUBTYPE_SH7751R
-	help
-	  Select SystemH if you are configuring for a Renesas SystemH
-	  7751R evaluation board.
-
-config SH_HP6XX
-	bool "HP6XX"
-	select SYS_SUPPORTS_APM_EMULATION
-	select HD6446X_SERIES
-	depends on CPU_SUBTYPE_SH7709
-	help
-	  Select HP6XX if configuring for a HP jornada HP6xx.
-	  More information (hardware only) at
-	  <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
-	bool "Dreamcast"
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7091
-	help
-	  Select Dreamcast if configuring for a SEGA Dreamcast.
-	  More information at <http://www.linux-sh.org>
-
-config SH_SH03
-	bool "Interface CTP/PCI-SH03"
-	depends on CPU_SUBTYPE_SH7751
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  CTP/PCI-SH03 is a CPU module computer that is produced
-	  by Interface Corporation.
-	  More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
-	bool "SecureEdge5410"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SecureEdge5410 if configuring for a SnapGear SH board.
-	  This includes both the OEM SecureEdge products as well as the
-	  SME product line.
-
-config SH_RTS7751R2D
-	bool "RTS7751R2D"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-	help
-	  Select RTS7751R2D if configuring for a Renesas Technology
-	  Sales SH-Graphics board.
-
-config SH_RSK7203
-	bool "RSK7203"
-	depends on CPU_SUBTYPE_SH7203
-
-config SH_SDK7780
-	bool "SDK7780R3"
-	depends on CPU_SUBTYPE_SH7780
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
-	  evaluation board.
-
-config SH_HIGHLANDER
-	bool "Highlander"
-	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-
-config SH_SH7785LCR
-	bool "SH7785LCR"
-	depends on CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-
-config SH_SH7785LCR_29BIT_PHYSMAPS
-	bool "SH7785LCR 29bit physmaps"
-	depends on SH_SH7785LCR
-	default y
-	help
-	  This board has 2 physical memory maps. It can be changed with
-	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
-	  you can access all on-board device in 29bit address mode.
-
-config SH_MIGOR
-	bool "Migo-R"
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select Migo-R if configuring for the SH7722 Migo-R platform
-          by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_AP325RXA
-	bool "AP-325RXA"
-	depends on CPU_SUBTYPE_SH7723
-	help
-	  Renesas "AP-325RXA" support.
-	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
-
-config SH_SH7763RDP
-	bool "SH7763RDP"
-	depends on CPU_SUBTYPE_SH7763
-	help
-	  Select SH7763RDP if configuring for a Renesas SH7763
-	  evaluation board.
-
-config SH_EDOSK7705
-	bool "EDOSK7705"
-	depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
-	bool "SH4-202 MicroDev"
-	depends on CPU_SUBTYPE_SH4_202
-	help
-	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
-	  with an SH4-202 CPU.
-
-config SH_LANDISK
-	bool "LANDISK"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
-	bool "TITAN"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select Titan if you are configuring for a Nimble Microsystems
-	  NetEngine NP51R.
  
-config SH_SHMIN
-	bool "SHMIN"
-	depends on CPU_SUBTYPE_SH7706
-	select CPU_HAS_IPR_IRQ
-	help
-	  Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
-	bool "L-BOX RE2"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
-	bool "SH-X3 Prototype board"
-	depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
-	bool "Magic Panel R2"
-	depends on CPU_SUBTYPE_SH7720
-	help
-	  Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
-	bool "Hitachi Cayman"
-	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
-	select SYS_SUPPORTS_PCI
-
-endmenu
+source "arch/sh/Kconfig.cpu"
 
-source "arch/sh/boards/mach-r2d/Kconfig"
-source "arch/sh/boards/mach-highlander/Kconfig"
-source "arch/sh/boards/mach-sdk7780/Kconfig"
-source "arch/sh/boards/mach-migor/Kconfig"
-source "arch/sh/boards/mach-magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 

arch/sh/Makefile

@@ -101,15 +101,8 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 core-y				+= arch/sh/kernel/ arch/sh/mm/
 core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 
-# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE)		+= mach-se/770x
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= mach-se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= mach-se/7619
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= mach-se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= mach-se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= mach-se/7780
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= mach-se/7343
-machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= mach-se/7721
+# Boards and Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE)		+= mach-se
 machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
 machdir-$(CONFIG_SH_SH03)			+= mach-sh03
@@ -133,8 +126,6 @@ machdir-$(CONFIG_SH_LBOX_RE2)			+= mach-lboxre2
 machdir-$(CONFIG_SH_MAGIC_PANEL_R2)		+= mach-magicpanelr2
 machdir-$(CONFIG_SH_CAYMAN)			+= mach-cayman
 
-incdir-y	:= $(notdir $(machdir-y))
-
 ifneq ($(machdir-y),)
 core-y	+= $(addprefix arch/sh/boards/, \
 	     $(filter-out ., $(patsubst %,%/,$(machdir-y))))
@@ -159,7 +150,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/sh/oprofile/
 boot := arch/sh/boot
 
 cflags-y	+= -Iarch/sh/include/$(cpuincdir-y)
-cflags-y	+= $(foreach d, $(incdir-y), -Iarch/sh/include/mach-$(d))
+cflags-y	+= $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
 
 KBUILD_CFLAGS		+= -pipe $(cflags-y)
 KBUILD_CPPFLAGS		+= $(cflags-y)

arch/sh/boards/Kconfig

+menu "Board support"
+
+config SOLUTION_ENGINE
+	bool
+
+config SH_SOLUTION_ENGINE
+	bool "SolutionEngine"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+	  CPU_SUBTYPE_SH7750R 
+	help
+	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+	bool "SolutionEngine7206"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7206
+	help
+	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+	  evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+	bool "SolutionEngine7619"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7619
+	help
+	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+	  evaluation board.
+	
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+	bool "SolutionEngine7722"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
+	  evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+	bool "SolutionEngine7751"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7751
+	help
+	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+	  evaluation board.
+	  
+config SH_7780_SOLUTION_ENGINE
+	bool "SolutionEngine7780"
+	select SOLUTION_ENGINE
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
+	  evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+	bool "SolutionEngine7343"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7343
+	help
+	  Select 7343 SolutionEngine if configuring for a Hitachi
+	  SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+	bool "SystemH7751R"
+	depends on CPU_SUBTYPE_SH7751R
+	help
+	  Select SystemH if you are configuring for a Renesas SystemH
+	  7751R evaluation board.
+
+config SH_HP6XX
+	bool "HP6XX"
+	select SYS_SUPPORTS_APM_EMULATION
+	select HD6446X_SERIES
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select HP6XX if configuring for a HP jornada HP6xx.
+	  More information (hardware only) at
+	  <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+	bool "Dreamcast"
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7091
+	help
+	  Select Dreamcast if configuring for a SEGA Dreamcast.
+	  More information at <http://www.linux-sh.org>
+
+config SH_SH03
+	bool "Interface CTP/PCI-SH03"
+	depends on CPU_SUBTYPE_SH7751
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  CTP/PCI-SH03 is a CPU module computer that is produced
+	  by Interface Corporation.
+	  More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+	bool "SecureEdge5410"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SecureEdge5410 if configuring for a SnapGear SH board.
+	  This includes both the OEM SecureEdge products as well as the
+	  SME product line.
+
+config SH_RTS7751R2D
+	bool "RTS7751R2D"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+	help
+	  Select RTS7751R2D if configuring for a Renesas Technology
+	  Sales SH-Graphics board.
+
+config SH_RSK7203
+	bool "RSK7203"
+	depends on CPU_SUBTYPE_SH7203
+
+config SH_SDK7780
+	bool "SDK7780R3"
+	depends on CPU_SUBTYPE_SH7780
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+	  evaluation board.
+
+config SH_HIGHLANDER
+	bool "Highlander"
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
+config SH_MIGOR
+	bool "Migo-R"
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+	bool "AP-325RXA"
+	depends on CPU_SUBTYPE_SH7723
+	help
+	  Renesas "AP-325RXA" support.
+	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+	bool "SH7763RDP"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select SH7763RDP if configuring for a Renesas SH7763
+	  evaluation board.
+
+config SH_EDOSK7705
+	bool "EDOSK7705"
+	depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+	bool "SH4-202 MicroDev"
+	depends on CPU_SUBTYPE_SH4_202
+	help
+	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+	  with an SH4-202 CPU.
+
+config SH_LANDISK
+	bool "LANDISK"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+	bool "TITAN"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select Titan if you are configuring for a Nimble Microsystems
+	  NetEngine NP51R.
+
+config SH_SHMIN
+	bool "SHMIN"
+	depends on CPU_SUBTYPE_SH7706
+	select CPU_HAS_IPR_IRQ
+	help
+	  Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+	bool "L-BOX RE2"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+	bool "SH-X3 Prototype board"
+	depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+	bool "Magic Panel R2"
+	depends on CPU_SUBTYPE_SH7720
+	help
+	  Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+	bool "Hitachi Cayman"
+	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+	select SYS_SUPPORTS_PCI
+
+endmenu
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+source "arch/sh/boards/mach-magicpanelr2/Kconfig"

arch/sh/boards/mach-se/7206/io.c

@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
 
 
 static inline void delay(void)

arch/sh/boards/mach-se/7206/irq.c

@@ -10,7 +10,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
 
 #define INTSTS0 0x31800000
 #define INTSTS1 0x31800002

arch/sh/boards/mach-se/7206/setup.c

@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
 #include <asm/io.h>
 #include <asm/machvec.h>
 #include <asm/heartbeat.h>

arch/sh/boards/mach-se/7343/irq.c

@@ -13,9 +13,9 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7343.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7343.h>
 
 static void disable_se7343_irq(unsigned int irq)
 {

arch/sh/boards/mach-se/7343/setup.c

 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
-#include <machvec.h>
-#include <mach/se7343.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7343.h>
 #include <asm/heartbeat.h>
 #include <asm/irq.h>
 #include <asm/io.h>

arch/sh/boards/mach-se/770x/io.c

@@ -6,7 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 
 /* MS7750 requires special versions of in*, out* routines, since
    PC-like io ports are located at upper half byte of 16-bit word which

arch/sh/boards/mach-se/770x/irq.c

@@ -13,7 +13,7 @@
 #include <linux/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 
 static struct ipr_data ipr_irq_table[] = {
 	/*

arch/sh/boards/mach-se/770x/setup.c

@@ -9,7 +9,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #include <asm/io.h>
 #include <asm/smc37c93x.h>
 #include <asm/heartbeat.h>

arch/sh/boards/mach-se/7721/irq.c

@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 
 enum {
 	UNUSED = 0,

arch/sh/boards/mach-se/7721/setup.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 

arch/sh/boards/mach-se/7722/irq.c

@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 
 static void disable_se7722_irq(unsigned int irq)
 {

arch/sh/boards/mach-se/7722/setup.c

@@ -17,7 +17,7 @@
 #include <linux/smc91x.h>
 #include <asm/machvec.h>
 #include <asm/clock.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_keysc.h>

arch/sh/boards/mach-se/7751/io.c

@@ -12,7 +12,7 @@
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <asm/io.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
 #include <asm/addrspace.h>
 
 static inline volatile u16 *port2adr(unsigned int port)

arch/sh/boards/mach-se/7751/irq.c

@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/irq.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
 
 static struct ipr_data ipr_irq_table[] = {
 	{ 13, 3, 3, 2 },

arch/sh/boards/mach-se/7751/setup.c

@@ -11,7 +11,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 

arch/sh/boards/mach-se/7780/irq.c

@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 
 /*
  * Initialize IRQ setting

arch/sh/boards/mach-se/7780/setup.c

@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 

arch/sh/boards/mach-se/Makefile

+obj-$(CONFIG_SH_SOLUTION_ENGINE)	+= 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= 7206/
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= 7619/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/

arch/sh/drivers/pci/ops-se7780.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 #include <asm/io.h>
 #include "pci-sh4.h"
 

arch/sh/kernel/cf-enabler.c

@@ -80,11 +80,11 @@ static int __init cf_init_default(void)
 }
 
 #if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 #endif
 
 /*