Commit 93ea8e6e authored by Henry Ptasinski's avatar Henry Ptasinski Committed by Greg Kroah-Hartman

staging: brcm80211: Remove unnecessary debug print routines.

Removed several unused and rarely used debug printout routines that look into
portions of the frame that are more properly left to the mac80211 stack.
Signed-off-by: default avatarHenry Ptasinski <henryp@broadcom.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 453fb2cb
......@@ -274,10 +274,6 @@ static int wlc_iovar_rangecheck(wlc_info_t *wlc, uint32 val,
const bcm_iovar_t *vi);
static uint8 wlc_local_constraint_qdbm(wlc_info_t *wlc);
#if defined(BCMDBG)
static void wlc_print_dot11hdr(uint8 *buf, int len);
#endif
/* send and receive */
static wlc_txq_info_t *wlc_txq_alloc(wlc_info_t *wlc, osl_t *osh);
static void wlc_txq_free(wlc_info_t *wlc, osl_t *osh, wlc_txq_info_t *qi);
......@@ -332,7 +328,6 @@ static uint wlc_down_del_timer(wlc_info_t *wlc);
static void wlc_ofdm_rateset_war(wlc_info_t *wlc);
static int _wlc_ioctl(wlc_info_t *wlc, int cmd, void *arg, int len,
struct wlc_if *wlcif);
char *print_fk(uint16 fk);
#if defined(BCMDBG)
void wlc_get_rcmta(wlc_info_t *wlc, int idx, struct ether_addr *addr)
......@@ -4909,44 +4904,6 @@ wlc_iovar_rangecheck(wlc_info_t *wlc, uint32 val, const bcm_iovar_t *vi)
return err;
}
#if defined(BCMDBG)
static const struct wlc_id_name_entry dot11_ie_names[] = {
{DOT11_MNG_SSID_ID, "SSID"},
{DOT11_MNG_RATES_ID, "Rates"},
{DOT11_MNG_FH_PARMS_ID, "FH Parms"},
{DOT11_MNG_DS_PARMS_ID, "DS Parms"},
{DOT11_MNG_CF_PARMS_ID, "CF Parms"},
{DOT11_MNG_TIM_ID, "TIM"},
{DOT11_MNG_IBSS_PARMS_ID, "IBSS Parms"},
{DOT11_MNG_COUNTRY_ID, "Country"},
{DOT11_MNG_HOPPING_PARMS_ID, "Hopping Parms"},
{DOT11_MNG_HOPPING_TABLE_ID, "Hopping Table"},
{DOT11_MNG_REQUEST_ID, "Request"},
{DOT11_MNG_QBSS_LOAD_ID, "QBSS LOAD"},
{DOT11_MNG_CHALLENGE_ID, "Challenge"},
{DOT11_MNG_PWR_CONSTRAINT_ID, "Pwr Constraint"},
{DOT11_MNG_PWR_CAP_ID, "Pwr Capability"},
{DOT11_MNG_TPC_REQUEST_ID, "TPC Request"},
{DOT11_MNG_TPC_REPORT_ID, "TPC Report"},
{DOT11_MNG_SUPP_CHANNELS_ID, "Supported Channels"},
{DOT11_MNG_CHANNEL_SWITCH_ID, "Channel Switch"},
{DOT11_MNG_MEASURE_REQUEST_ID, "Measure Request"},
{DOT11_MNG_MEASURE_REPORT_ID, "Measure Report"},
{DOT11_MNG_QUIET_ID, "Quiet"},
{DOT11_MNG_IBSS_DFS_ID, "IBSS DFS"},
{DOT11_MNG_ERP_ID, "ERP Info"},
{DOT11_MNG_TS_DELAY_ID, "TS Delay"},
{DOT11_MNG_HT_CAP, "HT Capability"},
{DOT11_MNG_NONERP_ID, "Legacy ERP Info"},
{DOT11_MNG_RSN_ID, "RSN"},
{DOT11_MNG_EXT_RATES_ID, "Ext Rates"},
{DOT11_MNG_HT_ADD, "HT Additional"},
{DOT11_MNG_EXT_CHANNEL_OFFSET, "Ext Channel Offset"},
{DOT11_MNG_VS_ID, "Vendor Specific"},
{0, NULL}
};
#endif /* defined(BCMDBG) */
#ifdef BCMDBG
static const char *supr_reason[] = {
"None", "PMQ Entry", "Flush request",
......@@ -5100,230 +5057,6 @@ bool wlc_chipmatch(uint16 vendor, uint16 device)
return FALSE;
}
#if defined(BCMDBG)
static const char *errstr = "802.11 Header INCOMPLETE\n";
static const char *fillstr = "------------";
static void wlc_print_dot11hdr(uint8 *buf, int len)
{
char hexbuf[(2 * D11B_PHY_HDR_LEN) + 1];
if (len == 0) {
printf("802.11 Header MISSING\n");
return;
}
if (len < D11B_PHY_HDR_LEN) {
bcm_format_hex(hexbuf, buf, len);
strncpy(hexbuf + (2 * len), fillstr,
2 * (D11B_PHY_HDR_LEN - len));
hexbuf[sizeof(hexbuf) - 1] = '\0';
} else {
bcm_format_hex(hexbuf, buf, D11B_PHY_HDR_LEN);
}
printf("PLCPHdr: %s ", hexbuf);
if (len < D11B_PHY_HDR_LEN) {
printf("%s\n", errstr);
return;
}
len -= D11B_PHY_HDR_LEN;
buf += D11B_PHY_HDR_LEN;
wlc_print_dot11_mac_hdr(buf, len);
}
void wlc_print_dot11_mac_hdr(uint8 *buf, int len)
{
char hexbuf[(2 * D11B_PHY_HDR_LEN) + 1];
char a1[(2 * ETHER_ADDR_LEN) + 1], a2[(2 * ETHER_ADDR_LEN) + 1];
char a3[(2 * ETHER_ADDR_LEN) + 1];
char flagstr[64];
uint16 fc, kind, toDS, fromDS;
uint16 v;
int fill_len = 0;
static const bcm_bit_desc_t fc_flags[] = {
{FC_TODS, "ToDS"},
{FC_FROMDS, "FromDS"},
{FC_MOREFRAG, "MoreFrag"},
{FC_RETRY, "Retry"},
{FC_PM, "PM"},
{FC_MOREDATA, "MoreData"},
{FC_WEP, "WEP"},
{FC_ORDER, "Order"},
{0, NULL}
};
if (len < 2) {
printf("FC: ------ ");
printf("%s\n", errstr);
return;
}
fc = buf[0] | (buf[1] << 8);
kind = fc & FC_KIND_MASK;
toDS = (fc & FC_TODS) != 0;
fromDS = (fc & FC_FROMDS) != 0;
bcm_format_flags(fc_flags, fc, flagstr, 64);
printf("FC: 0x%04x ", fc);
if (flagstr[0] != '\0')
printf("(%s) ", flagstr);
len -= 2;
buf += 2;
if (len < 2) {
printf("Dur/AID: ----- ");
printf("%s\n", errstr);
return;
}
v = buf[0] | (buf[1] << 8);
if (kind == FC_PS_POLL) {
printf("AID: 0x%04x", v);
} else {
printf("Dur: 0x%04x", v);
}
printf("\n");
len -= 2;
buf += 2;
strncpy(a1, fillstr, sizeof(a1));
strncpy(a2, fillstr, sizeof(a2));
strncpy(a3, fillstr, sizeof(a3));
if (len < ETHER_ADDR_LEN) {
bcm_format_hex(a1, buf, len);
strncpy(a1 + (2 * len), fillstr, 2 * (ETHER_ADDR_LEN - len));
} else if (len < 2 * ETHER_ADDR_LEN) {
bcm_format_hex(a1, buf, ETHER_ADDR_LEN);
bcm_format_hex(a2, buf + ETHER_ADDR_LEN, len - ETHER_ADDR_LEN);
fill_len = len - ETHER_ADDR_LEN;
strncpy(a2 + (2 * fill_len), fillstr,
2 * (ETHER_ADDR_LEN - fill_len));
} else if (len < 3 * ETHER_ADDR_LEN) {
bcm_format_hex(a1, buf, ETHER_ADDR_LEN);
bcm_format_hex(a2, buf + ETHER_ADDR_LEN, ETHER_ADDR_LEN);
bcm_format_hex(a3, buf + (2 * ETHER_ADDR_LEN),
len - (2 * ETHER_ADDR_LEN));
fill_len = len - (2 * ETHER_ADDR_LEN);
strncpy(a3 + (2 * fill_len), fillstr,
2 * (ETHER_ADDR_LEN - fill_len));
} else {
bcm_format_hex(a1, buf, ETHER_ADDR_LEN);
bcm_format_hex(a2, buf + ETHER_ADDR_LEN, ETHER_ADDR_LEN);
bcm_format_hex(a3, buf + (2 * ETHER_ADDR_LEN), ETHER_ADDR_LEN);
}
if (kind == FC_RTS) {
printf("RA: %s ", a1);
printf("TA: %s ", a2);
if (len < 2 * ETHER_ADDR_LEN)
printf("%s ", errstr);
} else if (kind == FC_CTS || kind == FC_ACK) {
printf("RA: %s ", a1);
if (len < ETHER_ADDR_LEN)
printf("%s ", errstr);
} else if (kind == FC_PS_POLL) {
printf("BSSID: %s", a1);
printf("TA: %s ", a2);
if (len < 2 * ETHER_ADDR_LEN)
printf("%s ", errstr);
} else if (kind == FC_CF_END || kind == FC_CF_END_ACK) {
printf("RA: %s ", a1);
printf("BSSID: %s ", a2);
if (len < 2 * ETHER_ADDR_LEN)
printf("%s ", errstr);
} else if (FC_TYPE(fc) == FC_TYPE_DATA) {
if (!toDS) {
printf("DA: %s ", a1);
if (!fromDS) {
printf("SA: %s ", a2);
printf("BSSID: %s ", a3);
} else {
printf("BSSID: %s ", a2);
printf("SA: %s ", a3);
}
} else if (!fromDS) {
printf("BSSID: %s ", a1);
printf("SA: %s ", a2);
printf("DA: %s ", a3);
} else {
printf("RA: %s ", a1);
printf("TA: %s ", a2);
printf("DA: %s ", a3);
}
if (len < 3 * ETHER_ADDR_LEN) {
printf("%s ", errstr);
} else if (len < 20) {
printf("SeqCtl: ------ ");
printf("%s ", errstr);
} else {
len -= 3 * ETHER_ADDR_LEN;
buf += 3 * ETHER_ADDR_LEN;
v = buf[0] | (buf[1] << 8);
printf("SeqCtl: 0x%04x ", v);
len -= 2;
buf += 2;
}
} else if (FC_TYPE(fc) == FC_TYPE_MNG) {
printf("DA: %s ", a1);
printf("SA: %s ", a2);
printf("BSSID: %s ", a3);
if (len < 3 * ETHER_ADDR_LEN) {
printf("%s ", errstr);
} else if (len < 20) {
printf("SeqCtl: ------ ");
printf("%s ", errstr);
} else {
len -= 3 * ETHER_ADDR_LEN;
buf += 3 * ETHER_ADDR_LEN;
v = buf[0] | (buf[1] << 8);
printf("SeqCtl: 0x%04x ", v);
len -= 2;
buf += 2;
}
}
if ((FC_TYPE(fc) == FC_TYPE_DATA) && toDS && fromDS) {
if (len < ETHER_ADDR_LEN) {
bcm_format_hex(hexbuf, buf, len);
strncpy(hexbuf + (2 * len), fillstr,
2 * (ETHER_ADDR_LEN - len));
} else {
bcm_format_hex(hexbuf, buf, ETHER_ADDR_LEN);
}
printf("SA: %s ", hexbuf);
if (len < ETHER_ADDR_LEN) {
printf("%s ", errstr);
} else {
len -= ETHER_ADDR_LEN;
buf += ETHER_ADDR_LEN;
}
}
if ((FC_TYPE(fc) == FC_TYPE_DATA) && (kind == FC_QOS_DATA)) {
if (len < 2) {
printf("QoS: ------");
printf("%s ", errstr);
} else {
v = buf[0] | (buf[1] << 8);
printf("QoS: 0x%04x ", v);
len -= 2;
buf += 2;
}
}
printf("\n");
return;
}
#endif /* defined(BCMDBG) */
#if defined(BCMDBG)
void wlc_print_txdesc(d11txh_t *txh)
{
......@@ -5406,10 +5139,6 @@ void wlc_print_txdesc(d11txh_t *txh)
printf("RTS Frame: %s", hexbuf);
printf("\n");
if (mtcl & TXC_SENDRTS) {
wlc_print_dot11_mac_hdr((uint8 *) &rts,
sizeof(txh->rts_frame));
}
}
#endif /* defined(BCMDBG) */
......@@ -5449,26 +5178,6 @@ void wlc_print_rxh(d11rxhdr_t *rxh)
printf("RXMACaggtype: %x\n", (macstatus2 & RXS_AGGTYPE_MASK));
printf("RxTSFTime: %04x\n", rxh->RxTSFTime);
}
void
wlc_print_hdrs(wlc_info_t *wlc, const char *prefix, uint8 *frame,
d11txh_t *txh, d11rxhdr_t *rxh, uint len)
{
ASSERT(!(txh && rxh));
printf("\nwl%d: %s:\n", wlc->pub->unit, prefix);
if (txh) {
wlc_print_txdesc(txh);
} else if (rxh) {
wlc_print_rxh(rxh);
}
if (len > 0) {
ASSERT(frame != NULL);
wlc_print_dot11hdr(frame, len);
}
}
#endif /* defined(BCMDBG) */
#if defined(BCMDBG)
......@@ -7454,95 +7163,6 @@ prep_mac80211_status(wlc_info_t *wlc, d11rxhdr_t *rxh, void *p,
}
}
char *print_fk(uint16 fk)
{
char *str;
switch (fk) {
case FC_ASSOC_REQ:
str = "FC_ASSOC_REQ";
break;
case FC_ASSOC_RESP:
str = "FC_ASSOC_RESP";
break;
case FC_REASSOC_REQ:
str = "FC_REASSOC_REQ";
break;
case FC_REASSOC_RESP:
str = "FC_REASSOC_RESP";
break;
case FC_PROBE_REQ:
str = "FC_PROBE_REQ";
break;
case FC_PROBE_RESP:
str = "FC_PROBE_RESP";
break;
case FC_BEACON:
str = "FC_BEACON";
break;
case FC_DISASSOC:
str = "FC_DISASSOC";
break;
case FC_AUTH:
str = "FC_AUTH";
break;
case FC_DEAUTH:
str = "FC_DEAUTH";
break;
case FC_ACTION:
str = "FC_ACTION";
break;
case FC_ACTION_NOACK:
str = "FC_ACTION_NOACK";
break;
case FC_CTL_WRAPPER:
str = "FC_CTL_WRAPPER";
break;
case FC_BLOCKACK_REQ:
str = "FC_BLOCKACK_REQ";
break;
case FC_BLOCKACK:
str = "FC_BLOCKACK";
break;
case FC_PS_POLL:
str = "FC_PS_POLL";
break;
case FC_RTS:
str = "FC_RTS";
break;
case FC_CTS:
str = "FC_CTS";
break;
case FC_ACK:
str = "FC_ACK";
break;
case FC_CF_END:
str = "FC_CF_END";
break;
case FC_CF_END_ACK:
str = "FC_CF_END_ACK";
break;
case FC_DATA:
str = "FC_DATA";
break;
case FC_NULL_DATA:
str = "FC_NULL_DATA";
break;
case FC_DATA_CF_ACK:
str = "FC_DATA_CF_ACK";
break;
case FC_QOS_DATA:
str = "FC_QOS_DATA";
break;
case FC_QOS_NULL:
str = "FC_QOS_NULL";
break;
default:
str = "Unknown!!";
break;
}
return str;
}
static void
wlc_recvctl(wlc_info_t *wlc, osl_t *osh, d11rxhdr_t *rxh, void *p)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment