ARM: STi: DT: add keyscan for stih416

Add keyscan support for stih416.
It is disabled by default given that it is not enabled on all boards.
Also there are PIOs conflict with already claimed lines.
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

arch/arm/boot/dts/stih416-pinctrl.dtsi

@@ -122,6 +122,22 @@ st,pins {
 				};
 			};
 
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&PIO0 2 ALT2 IN>;
+						keyin1 = <&PIO0 3 ALT2 IN>;
+						keyin2 = <&PIO0 4 ALT2 IN>;
+						keyin3 = <&PIO2 6 ALT2 IN>;
+
+						keyout0 = <&PIO1 6 ALT2 OUT>;
+						keyout1 = <&PIO1 7 ALT2 OUT>;
+						keyout2 = <&PIO0 6 ALT2 OUT>;
+						keyout3 = <&PIO2 7 ALT2 OUT>;
+					};
+				};
+			};
+
 			sbc_i2c0 {
 				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 					st,pins {

arch/arm/boot/dts/stih416.dtsi

@@ -224,5 +224,17 @@ spifsm: spifsm@fe902000 {
 
 			status = "disabled";
 		};
+
+		keyscan: keyscan@fe4b0000 {
+			compatible = "st,sti-keyscan";
+			status = "disabled";
+			reg = <0xfe4b0000 0x2000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+			clocks = <&CLK_SYSIN>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_keyscan>;
+			resets	= <&powerdown STIH416_KEYSCAN_POWERDOWN>,
+				  <&softreset STIH416_KEYSCAN_SOFTRESET>;
+		};
 	};
 };