Commit 948e78c3 authored by Martyn Welch's avatar Martyn Welch Committed by Kumar Gala

powerpc/86xx: Renaming following split of GE Fanuc joint venture

This patch renames GE Fanuc boards following the split-up of the GE Fanuc
joint venture. These boards are now made by GE Intelligent platorms.
Signed-off-by: default avatarMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 6f3d395a
/*
* GE Fanuc PPC9A Device Tree Source
* GE PPC9A Device Tree Source
*
* Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......
/*
* GE Fanuc SBC310 Device Tree Source
* GE SBC310 Device Tree Source
*
* Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......
/*
* GE Fanuc SBC610 Device Tree Source
* GE SBC610 Device Tree Source
*
* Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......
......@@ -33,32 +33,32 @@ config MPC8610_HPCD
This option enables support for the MPC8610 HPCD board.
config GEF_PPC9A
bool "GE Fanuc PPC9A"
bool "GE PPC9A"
select DEFAULT_UIMAGE
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
This option enables support for GE Fanuc's PPC9A.
This option enables support for the GE PPC9A.
config GEF_SBC310
bool "GE Fanuc SBC310"
bool "GE SBC310"
select DEFAULT_UIMAGE
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
This option enables support for GE Fanuc's SBC310.
This option enables support for the GE SBC310.
config GEF_SBC610
bool "GE Fanuc SBC610"
bool "GE SBC610"
select DEFAULT_UIMAGE
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAS_RAPIDIO
help
This option enables support for GE Fanuc's SBC610.
This option enables support for the GE SBC610.
endif
......
/*
* Driver for GE Fanuc's FPGA based GPIO pins
* Driver for GE FPGA based GPIO
*
* Author: Martyn Welch <martyn.welch@gefanuc.com>
* Author: Martyn Welch <martyn.welch@ge.com>
*
* 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
* 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
......@@ -164,6 +164,6 @@ static int __init gef_gpio_init(void)
};
arch_initcall(gef_gpio_init);
MODULE_DESCRIPTION("GE Fanuc I/O FPGA GPIO driver");
MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com");
MODULE_DESCRIPTION("GE I/O FPGA GPIO driver");
MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com");
MODULE_LICENSE("GPL");
/*
* Interrupt handling for GE Fanuc's FPGA based PIC
* Interrupt handling for GE FPGA based PIC
*
* Author: Martyn Welch <martyn.welch@gefanuc.com>
* Author: Martyn Welch <martyn.welch@ge.com>
*
* 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
* 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
......
/*
* GE Fanuc PPC9A board support
* GE PPC9A board support
*
* Author: Martyn Welch <martyn.welch@gefanuc.com>
* Author: Martyn Welch <martyn.welch@ge.com>
*
* Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -82,7 +82,7 @@ static void __init gef_ppc9a_setup_arch(void)
}
#endif
printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n");
printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
#ifdef CONFIG_SMP
mpc86xx_smp_init();
......@@ -151,7 +151,7 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
{
uint svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
('A' + gef_ppc9a_get_board_rev()));
......@@ -235,7 +235,7 @@ static int __init declare_of_platform_devices(void)
machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
define_machine(gef_ppc9a) {
.name = "GE Fanuc PPC9A",
.name = "GE PPC9A",
.probe = gef_ppc9a_probe,
.setup_arch = gef_ppc9a_setup_arch,
.init_IRQ = gef_ppc9a_init_irq,
......
/*
* GE Fanuc SBC310 board support
* GE SBC310 board support
*
* Author: Martyn Welch <martyn.welch@gefanuc.com>
* Author: Martyn Welch <martyn.welch@ge.com>
*
* Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -82,7 +82,7 @@ static void __init gef_sbc310_setup_arch(void)
}
#endif
printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n");
printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
#ifdef CONFIG_SMP
mpc86xx_smp_init();
......@@ -142,7 +142,7 @@ static void gef_sbc310_show_cpuinfo(struct seq_file *m)
{
uint svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id());
seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(),
......@@ -223,7 +223,7 @@ static int __init declare_of_platform_devices(void)
machine_device_initcall(gef_sbc310, declare_of_platform_devices);
define_machine(gef_sbc310) {
.name = "GE Fanuc SBC310",
.name = "GE SBC310",
.probe = gef_sbc310_probe,
.setup_arch = gef_sbc310_setup_arch,
.init_IRQ = gef_sbc310_init_irq,
......
/*
* GE Fanuc SBC610 board support
* GE SBC610 board support
*
* Author: Martyn Welch <martyn.welch@gefanuc.com>
* Author: Martyn Welch <martyn.welch@ge.com>
*
* Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -82,7 +82,7 @@ static void __init gef_sbc610_setup_arch(void)
}
#endif
printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
#ifdef CONFIG_SMP
mpc86xx_smp_init();
......@@ -133,7 +133,7 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m)
{
uint svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
('A' + gef_sbc610_get_board_rev() - 1));
......@@ -212,7 +212,7 @@ static int __init declare_of_platform_devices(void)
machine_device_initcall(gef_sbc610, declare_of_platform_devices);
define_machine(gef_sbc610) {
.name = "GE Fanuc SBC610",
.name = "GE SBC610",
.probe = gef_sbc610_probe,
.setup_arch = gef_sbc610_setup_arch,
.init_IRQ = gef_sbc610_init_irq,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment