Commit 94b43b67 authored by Kim, Milo's avatar Kim, Milo Committed by Bryan Wu

leds-lp5523: add channel name in the platform data

The name of each led channel is configurable.
If the name is NULL, just use the channel id for making the channel name
Signed-off-by: default avatarMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: default avatarBryan Wu <bryan.wu@canonical.com>
parent 127aedc8
......@@ -10,8 +10,22 @@ Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
Description
-----------
LP5523 can drive up to 9 channels. Leds can be controlled directly via
the led class control interface. Channels have generic names:
lp5523:channelx where x is 0...8
the led class control interface.
The name of each channel is configurable in the platform data - name and label.
There are three options to make the channel name.
a) Define the 'name' in the platform data
To make specific channel name, then use 'name' platform data.
/sys/class/leds/R1 (name: 'R1')
/sys/class/leds/B1 (name: 'B1')
b) Use the 'label' with no 'name' field
For one device name with channel number, then use 'label'.
/sys/class/leds/RGB:channelN (label: 'RGB', N: 0 ~ 8)
c) Default
If both fields are NULL, 'lp5523' is used by default.
/sys/class/leds/lp5523:channelN (N: 0 ~ 8)
The chip provides 3 engines. Each engine can control channels without
interaction from the main CPU. Details of the micro engine code can be found
......@@ -46,12 +60,13 @@ Note - chan_nr can have values between 0 and 8.
static struct lp5523_led_config lp5523_led_config[] = {
{
.name = "D1",
.chan_nr = 0,
.led_current = 50,
.max_current = 130,
},
...
}, {
{
.chan_nr = 8,
.led_current = 50,
.max_current = 130,
......
......@@ -846,10 +846,14 @@ static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev,
return -EINVAL;
}
if (pdata->led_config[chan].name) {
led->cdev.name = pdata->led_config[chan].name;
} else {
snprintf(name, sizeof(name), "%s:channel%d",
pdata->label ?: "lp5523", chan);
led->cdev.name = name;
}
led->cdev.brightness_set = lp5523_set_brightness;
res = led_classdev_register(dev, &led->cdev);
if (res < 0) {
......
......@@ -26,6 +26,7 @@
/* See Documentation/leds/leds-lp5523.txt */
struct lp5523_led_config {
const char *name;
u8 chan_nr;
u8 led_current; /* mA x10, 0 if led is not connected */
u8 max_current;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment