dts: imx53: fix sd card gpio polarity specified in device tree

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

arch/arm/boot/dts/imx53-ard.dts

@@ -103,8 +103,8 @@ volume-down {
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-m53evk.dts

@@ -124,8 +124,8 @@ &can2 {
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-qsb-common.dtsi

@@ -147,8 +147,8 @@ &ssi2 {
 &esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 0>;
-	wp-gpios = <&gpio3 12 0>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 	status = "okay";
 };

arch/arm/boot/dts/imx53-smd.dts

@@ -41,8 +41,8 @@ volume-down {
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 0>;
-	wp-gpios = <&gpio4 11 0>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-tqma53.dtsi

@@ -41,8 +41,8 @@ &esdhc2 {
 	pinctrl-0 = <&pinctrl_esdhc2>,
 		    <&pinctrl_esdhc2_cdwp>;
 	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 0>;
-	cd-gpios = <&gpio1 4 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 

arch/arm/boot/dts/imx53-tx53.dtsi

@@ -183,7 +183,7 @@ spidev1: spi@1 {
 };
 
 &esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
@@ -191,7 +191,7 @@ &esdhc1 {
 };
 
 &esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;

arch/arm/boot/dts/imx53-voipac-bsb.dts

@@ -119,8 +119,8 @@ &audmux {
 &esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 0>;
-	wp-gpios = <&gpio2 19 0>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };