bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO

For dra7 dcan and dwc3 instances we need to block clockdomain autoidle.
Let's do this with CLKDM_NOAUTO quirk flag and enable it for dcan and
dwc3.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

drivers/bus/ti-sysc.c

@@ -473,7 +473,7 @@ static void sysc_clkdm_deny_idle(struct sysc *ddata)
 {
 	struct ti_sysc_platform_data *pdata;
 
-	if (ddata->legacy_mode)
+	if (ddata->legacy_mode || (ddata->cfg.quirks & SYSC_QUIRK_CLKDM_NOAUTO))
 		return;
 
 	pdata = dev_get_platdata(ddata->dev);
@@ -485,7 +485,7 @@ static void sysc_clkdm_allow_idle(struct sysc *ddata)
 {
 	struct ti_sysc_platform_data *pdata;
 
-	if (ddata->legacy_mode)
+	if (ddata->legacy_mode || (ddata->cfg.quirks & SYSC_QUIRK_CLKDM_NOAUTO))
 		return;
 
 	pdata = dev_get_platdata(ddata->dev);
@@ -1245,6 +1245,12 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	/* Quirks that need to be set based on detected module */
 	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff,
 		   SYSC_MODULE_QUIRK_AESS),
+	SYSC_QUIRK("dcan", 0x48480000, 0x20, -1, -1, 0xa3170504, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("dwc3", 0x48880000, 0, 0x10, -1, 0x500a0200, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("dwc3", 0x488c0000, 0, 0x10, -1, 0x500a0200, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
 		   SYSC_MODULE_QUIRK_HDQ1W),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,

include/linux/platform_data/ti-sysc.h

@@ -49,6 +49,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_CLKDM_NOAUTO		BIT(21)
 #define SYSC_QUIRK_FORCE_MSTANDBY	BIT(20)
 #define SYSC_MODULE_QUIRK_AESS		BIT(19)
 #define SYSC_MODULE_QUIRK_SGX		BIT(18)