Commit 95166a3f authored by Andre Przywara's avatar Andre Przywara Committed by Greg Kroah-Hartman

drivers: PL011: refactor pl011_shutdown()

Split the pl011_shutdown() function into smaller chunks to allow
easier reuse later when adding SBSA support.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Tested-by: default avatarMark Langsdorf <mlangsdo@redhat.com>
Tested-by: default avatarNaresh Bhat <nbhat@cavium.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 867b8e8e
......@@ -1635,34 +1635,15 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
writew(val, uap->port.membase + lcrh);
}
static void pl011_shutdown(struct uart_port *port)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned int cr;
/*
* disable all interrupts
*/
spin_lock_irq(&uap->port.lock);
uap->im = 0;
writew(uap->im, uap->port.membase + UART011_IMSC);
writew(0xffff, uap->port.membase + UART011_ICR);
spin_unlock_irq(&uap->port.lock);
pl011_dma_shutdown(uap);
/*
* Free the interrupt
*/
free_irq(uap->port.irq, uap);
/*
* disable the port
/*
* disable the port. It should not disable RTS and DTR.
* Also RTS and DTR state should be preserved to restore
* it during startup().
*/
static void pl011_disable_uart(struct uart_amba_port *uap)
{
unsigned int cr;
uap->autorts = false;
spin_lock_irq(&uap->port.lock);
cr = readw(uap->port.membase + UART011_CR);
......@@ -1678,6 +1659,32 @@ static void pl011_shutdown(struct uart_port *port)
pl011_shutdown_channel(uap, uap->lcrh_rx);
if (uap->lcrh_rx != uap->lcrh_tx)
pl011_shutdown_channel(uap, uap->lcrh_tx);
}
static void pl011_disable_interrupts(struct uart_amba_port *uap)
{
spin_lock_irq(&uap->port.lock);
/* mask all interrupts and clear all pending ones */
uap->im = 0;
writew(uap->im, uap->port.membase + UART011_IMSC);
writew(0xffff, uap->port.membase + UART011_ICR);
spin_unlock_irq(&uap->port.lock);
}
static void pl011_shutdown(struct uart_port *port)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
pl011_disable_interrupts(uap);
pl011_dma_shutdown(uap);
free_irq(uap->port.irq, uap);
pl011_disable_uart(uap);
/*
* Shut down the clock producer
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment