Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc

* 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits)
  ARM: mach-mxs: fix machines' initializers order
  mmc: mxcmmc: explicitly includes mach/hardware.h
  arm/imx: explicitly includes mach/hardware.h in pm-imx27.c
  arm/imx: remove mx27_setup_weimcs() from mx27.h
  arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c
  arm/imx: remove mx31_setup_weimcs() from mx31.h
  ARM: tegra: devices.c should include devices.h
  ARM: tegra: cpu-tegra: unexport two functions
  ARM: tegra: cpu-tegra: sparse type fix
  ARM: tegra: dma: staticify some tables and functions
  ARM: tegra: tegra2_clocks: don't export some tables
  ARM: tegra: tegra_powergate_is_powered should be static
  ARM: tegra: tegra_rtc_read_ms should be static
  ARM: tegra: tegra_init_cache should be static
  ARM: tegra: pcie: 0 -> NULL changes
  ARM: tegra: pcie: include board.h
  ARM: tegra: pcie: don't cast __iomem pointers
  ARM: tegra: tegra2_clocks: 0 -> NULL changes
  ARM: tegra: tegra2_clocks: don't cast __iomem pointers
  ARM: tegra: timer: don't cast __iomem pointers
  ...

Fix up trivial conflicts in
  arch/arm/mach-omap2/Makefile,
  arch/arm/mach-u300/{Makefile.boot,core.c}
  arch/arm/plat-{mxc,omap}/devices.c

arch/arm/Kconfig

@@ -861,6 +861,7 @@ config ARCH_U300
 	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
 	select ARM_AMBA
+	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP

arch/arm/configs/mx3_defconfig

@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -13,20 +12,21 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_PCM037=y
 CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_MX31_3DS=y
 CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_QONG=y
-CONFIG_MACH_PCM043=y
 CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX35=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
+CONFIG_ARM_ERRATA_411920=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
@@ -35,7 +35,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 CONFIG_VFP=y
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -52,7 +51,6 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_FW_LOADER=m
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -62,24 +60,27 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 # CONFIG_BLK_DEV is not set
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
 CONFIG_DNET=y
-CONFIG_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_IMX=y
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -89,12 +90,15 @@ CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
 CONFIG_MFD_WM8350_I2C=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_WM8350=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_MT9M001=y
 CONFIG_SOC_CAMERA_MT9M111=y
@@ -105,9 +109,26 @@ CONFIG_SOC_CAMERA_OV772X=y
 CONFIG_VIDEO_MX3=y
 # CONFIG_RADIO_ADAPTERS is not set
 CONFIG_FB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_WM1133_EV1=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_FSL_USB2=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_MXC=y
 CONFIG_DMADEVICES=y
 # CONFIG_DNOTIFY is not set
 CONFIG_TMPFS=y
@@ -119,6 +140,5 @@ CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/arm/include/asm/device.h

@@ -15,7 +15,12 @@ struct dev_archdata {
 #endif
 };
 
+struct omap_device;
+
 struct pdev_archdata {
+#ifdef CONFIG_ARCH_OMAP
+	struct omap_device *od;
+#endif
 };
 
 #endif

arch/arm/mach-davinci/devices-da8xx.c

@@ -136,6 +136,7 @@ static struct edma_soc_info da830_edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= da8xx_queue_tc_mapping,
 	.queue_priority_mapping	= da8xx_queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
@@ -151,6 +152,7 @@ static struct edma_soc_info da850_edma_cc_info[] = {
 		.n_cc			= 1,
 		.queue_tc_mapping	= da8xx_queue_tc_mapping,
 		.queue_priority_mapping	= da8xx_queue_priority_mapping,
+		.default_queue		= EVENTQ_1,
 	},
 	{
 		.n_channel		= 32,
@@ -160,6 +162,7 @@ static struct edma_soc_info da850_edma_cc_info[] = {
 		.n_cc			= 1,
 		.queue_tc_mapping	= da850_queue_tc_mapping,
 		.queue_priority_mapping	= da850_queue_priority_mapping,
+		.default_queue		= EVENTQ_0,
 	},
 };
 

arch/arm/mach-davinci/devices-tnetv107x.c

@@ -80,6 +80,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= edma_tc_mapping,
 	.queue_priority_mapping	= edma_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {

arch/arm/mach-davinci/dm355.c

@@ -591,6 +591,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {

arch/arm/mach-davinci/dm644x.c

@@ -514,6 +514,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= queue_tc_mapping,
 	.queue_priority_mapping	= queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {

arch/arm/mach-davinci/dm646x.c

@@ -555,6 +555,7 @@ static struct edma_soc_info edma_cc0_info = {
 	.n_cc			= 1,
 	.queue_tc_mapping	= dm646x_queue_tc_mapping,
 	.queue_priority_mapping	= dm646x_queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
 };
 
 static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {

arch/arm/mach-davinci/dma.c

@@ -1435,12 +1435,11 @@ static int __init edma_probe(struct platform_device *pdev)
 			goto fail1;
 		}
 
-		edma_cc[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+		edma_cc[j] = kzalloc(sizeof(struct edma), GFP_KERNEL);
 		if (!edma_cc[j]) {
 			status = -ENOMEM;
 			goto fail1;
 		}
-		memset(edma_cc[j], 0, sizeof(struct edma));
 
 		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
 							EDMA_MAX_DMACH);
@@ -1450,8 +1449,6 @@ static int __init edma_probe(struct platform_device *pdev)
 							EDMA_MAX_CC);
 
 		edma_cc[j]->default_queue = info[j]->default_queue;
-		if (!edma_cc[j]->default_queue)
-			edma_cc[j]->default_queue = EVENTQ_1;
 
 		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
 			edmacc_regs_base[j]);

arch/arm/mach-exynos4/Kconfig

@@ -114,22 +114,7 @@ menu "EXYNOS4 Machines"
 
 config MACH_SMDKC210
 	bool "SMDKC210"
-	select CPU_EXYNOS4210
-	select S5P_DEV_FIMD0
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_I2C1
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_BACKLIGHT
-	select EXYNOS4_DEV_PD
-	select EXYNOS4_DEV_SYSMMU
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_SDHCI
+	select MACH_SMDKV310
 	help
 	  Machine support for Samsung SMDKC210
 

arch/arm/mach-exynos4/Makefile

@@ -25,7 +25,7 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 
 # machine support
 
-obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_SMDKV310)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_ARMLEX4210)		+= mach-armlex4210.o
 obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o

arch/arm/mach-exynos4/mach-smdkc210.c

-/* linux/arch/arm/mach-exynos4/mach-smdkc210.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC210_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKC210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-		/* fire nRESET on power up */
-		gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
-		gpio_direction_output(EXYNOS4_GPX0(6), 1);
-		mdelay(100);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 0);
-		mdelay(10);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 1);
-		mdelay(10);
-
-		gpio_free(EXYNOS4_GPX0(6));
-	} else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-	}
-}
-
-static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
-	.set_power		= lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkc210_lcd_lte480wv = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s5p_device_fimd0.dev,
-	.dev.platform_data	= &smdkc210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkc210_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp		= 32,
-	.default_bpp		= 24,
-};
-
-static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
-	.win[0]		= &smdkc210_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkc210_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(1),
-		.end	= EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(5),
-		.end	= IRQ_EINT(5),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
-	},
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkc210_smsc911x = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smdkc210_smsc911x_resources),
-	.resource	= smdkc210_smsc911x_resources,
-	.dev		= {
-		.platform_data	= &smsc9215_config,
-	},
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkc210_devices[] __initdata = {
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c1,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&exynos4_device_ac97,
-	&exynos4_device_i2s0,
-	&exynos4_device_pd[PD_MFC],
-	&exynos4_device_pd[PD_G3D],
-	&exynos4_device_pd[PD_LCD0],
-	&exynos4_device_pd[PD_LCD1],
-	&exynos4_device_pd[PD_CAM],
-	&exynos4_device_pd[PD_TV],
-	&exynos4_device_pd[PD_GPS],
-	&exynos4_device_sysmmu,
-	&samsung_asoc_dma,
-	&s5p_device_fimd0,
-	&smdkc210_lcd_lte480wv,
-	&smdkc210_smsc911x,
-};
-
-static void __init smdkc210_smsc911x_init(void)
-{
-	u32 cs1;
-
-	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5P_SROM_BW) &
-		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5P_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5P_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(1),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc210_bl_data = {
-	.pwm_id = 1,
-	.pwm_period_ns  = 1000,
-};
-
-static void __init smdkc210_map_io(void)
-{
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
-}
-
-static void __init smdkc210_machine_init(void)
-{
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	smdkc210_smsc911x_init();
-
-	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
-	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
-
-	samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
-	s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
-
-	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
-}
-
-MACHINE_START(SMDKC210, "SMDKC210")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdkc210_map_io,
-	.init_machine	= smdkc210_machine_init,
-	.timer		= &exynos4_timer,
-MACHINE_END

arch/arm/mach-exynos4/mach-smdkv310.c

@@ -9,7 +9,9 @@
 */
 
 #include <linux/serial_core.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/lcd.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
@@ -21,11 +23,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <video/platform_lcd.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
@@ -112,6 +117,67 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+		/* fire nRESET on power up */
+		gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+		gpio_direction_output(EXYNOS4_GPX0(6), 1);
+		mdelay(100);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 0);
+		mdelay(10);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 1);
+		mdelay(10);
+
+		gpio_free(EXYNOS4_GPX0(6));
+	} else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+	}
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+	.set_power		= lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 13,
+		.right_margin	= 8,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+	.win[0]		= &smdkv310_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static struct resource smdkv310_smsc911x_resources[] = {
 	[0] = {
 		.start	= EXYNOS4_PA_SROM_BANK(1),
@@ -188,6 +254,8 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&exynos4_device_sysmmu,
 	&samsung_asoc_dma,
 	&samsung_asoc_idma,
+	&s5p_device_fimd0,
+	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
 };
@@ -248,6 +316,7 @@ static void __init smdkv310_machine_init(void)
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
 }
@@ -261,3 +330,12 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdkv310_map_io,
+	.init_machine	= smdkv310_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END

arch/arm/mach-imx/Makefile

 obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
 
-obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
 
-obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
 
-obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
-obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o

arch/arm/mach-imx/cache-l2x0.c

-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- * Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/hardware.h>
-
-static int mxc_init_l2x0(void)
-{
-	void __iomem *l2x0_base;
-	void __iomem *clkctl_base;
-
-	if (!cpu_is_mx31() && !cpu_is_mx35())
-		return 0;
-
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value.
- */
-#define L2_MEM_VAL 0x10
-
-	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
-	if (clkctl_base != NULL) {
-		writel(0x00000515, clkctl_base + L2_MEM_VAL);
-		iounmap(clkctl_base);
-	} else {
-		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
-	}
-
-	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
-	if (IS_ERR(l2x0_base)) {
-		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
-				PTR_ERR(l2x0_base));
-		return 0;
-	}
-
-	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-
-	return 0;
-}
-arch_initcall(mxc_init_l2x0);

arch/arm/mach-imx/mach-armadillo5x0.c

@@ -314,25 +314,19 @@ static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
 	},
 };
 
-static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+static const struct physmap_flash_data
+		armadillo5x0_nor_flash_pdata __initconst = {
 	.width		= 2,
 	.parts		= armadillo5x0_nor_flash_partitions,
 	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
 };
 
-static struct resource armadillo5x0_nor_flash_resource = {
+static const struct resource armadillo5x0_nor_flash_resource __initconst = {
 	.flags		= IORESOURCE_MEM,
 	.start		= MX31_CS0_BASE_ADDR,
 	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
 };
 
-static struct platform_device armadillo5x0_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &armadillo5x0_nor_flash_resource,
-};
-
 /*
  * FB support
  */
@@ -514,8 +508,10 @@ static void __init armadillo5x0_init(void)
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* Register NOR Flash */
-	mxc_register_device(&armadillo5x0_nor_flash,
-			    &armadillo5x0_nor_flash_pdata);
+	platform_device_register_resndata(NULL, "physmap-flash", -1,
+			&armadillo5x0_nor_flash_resource, 1,
+			&armadillo5x0_nor_flash_pdata,
+			sizeof(armadillo5x0_nor_flash_pdata));
 
 	/* Register NAND Flash */
 	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);

arch/arm/mach-imx/mach-cpuimx35.c

@@ -66,7 +66,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x48),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
-		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 

arch/arm/mach-imx/mach-kzm_arm11_01.c

@@ -36,6 +36,7 @@
 
 #include <mach/clock.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 
 #include "devices-imx31.h"

arch/arm/mach-imx/mach-mx1ads.c

@@ -68,23 +68,16 @@ static const struct imxuart_platform_data uart1_pdata __initconst = {
  * Physmap flash
  */
 
-static struct physmap_flash_data mx1ads_flash_data = {
+static const struct physmap_flash_data mx1ads_flash_data __initconst = {
 	.width		= 4,		/* bankwidth in bytes */
 };
 
-static struct resource flash_resource = {
+static const struct resource flash_resource __initconst = {
 	.start	= MX1_CS0_PHYS,
 	.end	= MX1_CS0_PHYS + SZ_32M - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
-static struct platform_device flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
 /*
  * I2C
  */
@@ -125,7 +118,9 @@ static void __init mx1ads_init(void)
 	imx1_add_imx_uart1(&uart1_pdata);
 
 	/* Physmap flash */
-	mxc_register_device(&flash_device, &mx1ads_flash_data);
+	platform_device_register_resndata(NULL, "physmap-flash", 0,
+			&flash_resource, 1,
+			&mx1ads_flash_data, sizeof(mx1ads_flash_data));
 
 	/* I2C */
 	i2c_register_board_info(0, mx1ads_i2c_devices,

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -357,7 +357,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 		.bus_num	= 1,
 		.chip_select	= 0, /* SS0 */
 		.platform_data	= &mc13783_pdata,
-		.irq = gpio_to_irq(PMIC_INT),
+		.irq = IMX_GPIO_TO_IRQ(PMIC_INT),
 		.mode = SPI_CS_HIGH,
 	}, {
 		.modalias	= "l4f00242t03",

arch/arm/mach-imx/mach-pcm038.c

@@ -176,7 +176,9 @@ static struct platform_device *platform_devices[] __initdata = {
  * setup other stuffs to access the sram. */
 static void __init pcm038_init_sram(void)
 {
-	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
+	__raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1)));
+	__raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1)));
+	__raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1)));
 }
 
 static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {

arch/arm/mach-imx/mach-qong.c

@@ -190,7 +190,10 @@ static struct platform_device qong_nand_device = {
 static void __init qong_init_nand_mtd(void)
 {
 	/* init CS */
-	mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
+	__raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
+	__raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
+	__raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
+
 	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
 
 	/* enable pin */

arch/arm/mach-imx/mach-vpr200.c

@@ -162,7 +162,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = {
 	}, {
 		I2C_BOARD_INFO("mc13892", 0x08),
 		.platform_data = &vpr200_pmic,
-		.irq = gpio_to_irq(GPIO_PMIC_INT),
+		.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
 	}
 };
 

arch/arm/mach-imx/mm-imx35.c → arch/arm/mach-imx/mm-imx3.c

@@ -21,8 +21,8 @@
 #include <linux/err.h>
 
 #include <asm/pgtable.h>
-#include <asm/mach/map.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/map.h>
 
 #include <mach/common.h>
 #include <mach/devices-common.h>
@@ -30,6 +30,102 @@
 #include <mach/iomux-v3.h>
 #include <mach/irqs.h>
 
+static void imx3_idle(void)
+{
+	unsigned long reg = 0;
+	__asm__ __volatile__(
+		/* disable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"bic %0, %0, #0x00001000\n"
+		"bic %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		/* invalidate I cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c5, 0\n"
+		/* clear and invalidate D cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c14, 0\n"
+		/* WFI */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c0, 4\n"
+		"nop\n" "nop\n" "nop\n" "nop\n"
+		"nop\n" "nop\n" "nop\n"
+		/* enable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"orr %0, %0, #0x00001000\n"
+		"orr %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		: "=r" (reg));
+}
+
+static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
+				  unsigned int mtype)
+{
+	if (mtype == MT_DEVICE) {
+		/*
+		 * Access all peripherals below 0x80000000 as nonshared device
+		 * on mx3, but leave l2cc alone.  Otherwise cache corruptions
+		 * can occur.
+		 */
+		if (phys_addr < 0x80000000 &&
+				!addr_in_module(phys_addr, MX3x_L2CC))
+			mtype = MT_DEVICE_NONSHARED;
+	}
+
+	return __arm_ioremap(phys_addr, size, mtype);
+}
+
+void imx3_init_l2x0(void)
+{
+	void __iomem *l2x0_base;
+	void __iomem *clkctl_base;
+
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value.
+ */
+#define L2_MEM_VAL 0x10
+
+	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+	if (clkctl_base != NULL) {
+		writel(0x00000515, clkctl_base + L2_MEM_VAL);
+		iounmap(clkctl_base);
+	} else {
+		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+	}
+
+	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
+	if (IS_ERR(l2x0_base)) {
+		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+				PTR_ERR(l2x0_base));
+		return;
+	}
+
+	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+}
+
+static struct map_desc mx31_io_desc[] __initdata = {
+	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx31_map_io(void)
+{
+	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
 static struct map_desc mx35_io_desc[] __initdata = {
 	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
 	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
@@ -43,11 +139,26 @@ void __init mx35_map_io(void)
 	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
 }
 
+void __init imx31_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+	imx_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
 void __init imx35_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+	imx_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
 }
 
 void __init mx35_init_irq(void)
@@ -55,6 +166,40 @@ void __init mx35_init_irq(void)
 	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
 }
 
+static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
+	.per_2_per_addr = 1677,
+};
+
+static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
+	.ap_2_ap_addr = 423,
+	.ap_2_bp_addr = 829,
+	.bp_2_ap_addr = 1029,
+};
+
+static struct sdma_platform_data imx31_sdma_pdata __initdata = {
+	.fw_name = "sdma-imx31-to2.bin",
+	.script_addrs = &imx31_to2_sdma_script,
+};
+
+void __init imx31_soc_init(void)
+{
+	int to_version = mx31_revision() >> 4;
+
+	imx3_init_l2x0();
+
+	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
+	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
+	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+
+	if (to_version == 1) {
+		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
+			strlen(imx31_sdma_pdata.fw_name));
+		imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
+	}
+
+	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
+}
+
 static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
 	.ap_2_ap_addr = 642,
 	.uart_2_mcu_addr = 817,
@@ -94,6 +239,8 @@ void __init imx35_soc_init(void)
 {
 	int to_version = mx35_revision() >> 4;
 
+	imx3_init_l2x0();
+
 	/* i.mx35 has the i.mx31 type gpio */
 	mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
 	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);

arch/arm/mach-imx/mm-imx31.c

-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-static struct map_desc mx31_io_desc[] __initdata = {
-	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx31_map_io(void)
-{
-	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
-}
-
-void __init imx31_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX31);
-	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-void __init mx31_init_irq(void)
-{
-	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
-	.per_2_per_addr = 1677,
-};
-
-static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
-	.ap_2_ap_addr = 423,
-	.ap_2_bp_addr = 829,
-	.bp_2_ap_addr = 1029,
-};
-
-static struct sdma_platform_data imx31_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx31-to2.bin",
-	.script_addrs = &imx31_to2_sdma_script,
-};
-
-void __init imx31_soc_init(void)
-{
-	int to_version = mx31_revision() >> 4;
-
-	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
-	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
-	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
-
-	if (to_version == 1) {
-		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
-			strlen(imx31_sdma_pdata.fw_name));
-		imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
-	}
-
-	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
-}

arch/arm/mach-imx/pm-imx27.c

@@ -11,7 +11,7 @@
 #include <linux/suspend.h>
 #include <linux/io.h>
 #include <mach/system.h>
-#include <mach/mx27.h>
+#include <mach/hardware.h>
 
 static int mx27_suspend_enter(suspend_state_t state)
 {

arch/arm/mach-mx5/Kconfig

@@ -52,7 +52,6 @@ config MACH_MX50_RDP
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
-	select IMX_HAVE_PLATFORM_FEC
 	help
 	  Include support for MX50 reference design platform (RDP) board. This
 	  includes specific configurations for the board and its peripherals.
@@ -65,9 +64,11 @@ comment "i.MX51 machines:"
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
@@ -91,8 +92,10 @@ config MACH_MX51_3DS
 config MACH_EUKREA_CPUIMX51
 	bool "Support Eukrea CPUIMX51 module"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
@@ -119,10 +122,12 @@ endchoice
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_SPI_IMX
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for Eukrea CPUIMX51SD platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -147,6 +152,7 @@ config MX51_EFIKA_COMMON
 	bool
 	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI

arch/arm/mach-mx5/Makefile

@@ -3,8 +3,7 @@
 #
 
 # Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
-obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
+obj-y   := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
 
 obj-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o

arch/arm/mach-mx5/board-cpuimx51.c

@@ -22,21 +22,18 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 
 #include <mach/eukrea-baseboards.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 #define CPUIMX51_USBH1_STP	IMX_GPIO_NR(1, 27)
 #define CPUIMX51_QUARTA_GPIO	IMX_GPIO_NR(3, 28)
@@ -57,7 +54,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -65,7 +62,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -73,7 +70,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -81,7 +78,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -167,7 +164,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -190,7 +187,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -206,17 +203,17 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
@@ -270,12 +267,12 @@ static void __init eukrea_cpuimx51_init(void)
 				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+		imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	else {
 		initialize_otg_port(NULL);
-		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+		imx51_add_fsl_usb2_udc(&usb_pdata);
 	}
-	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	imx51_add_mxc_ehci_hs(1, &usbh1_config);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
 	eukrea_mbimx51_baseboard_init();

arch/arm/mach-mx5/board-cpuimx51sd.c

@@ -22,7 +22,6 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/can/platform/mcp251x.h>
@@ -32,14 +31,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "cpu_op-mx51.h"
 
 #define USBH1_RST		IMX_GPIO_NR(2, 28)
@@ -108,7 +105,7 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 
 	/* Touchscreen */
 	/* IRQ */
-	_MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+	NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
@@ -129,7 +126,7 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x49),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
-		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 
@@ -149,7 +146,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -172,7 +169,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -189,17 +186,17 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
@@ -245,7 +242,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = {
 		.mode		= SPI_MODE_0,
 		.chip_select     = 0,
 		.platform_data   = &mcp251x_info,
-		.irq             = gpio_to_irq(CAN_IRQGPIO)
+		.irq             = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
 	},
 };
 
@@ -303,17 +300,17 @@ static void __init eukrea_cpuimx51sd_init(void)
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+		imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	else {
 		initialize_otg_port(NULL);
-		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+		imx51_add_fsl_usb2_udc(&usb_pdata);
 	}
 
 	gpio_request(USBH1_RST, "usb_rst");
 	gpio_direction_output(USBH1_RST, 0);
 	msleep(20);
 	gpio_set_value(USBH1_RST, 1);
-	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	imx51_add_mxc_ehci_hs(1, &usbh1_config);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
 	eukrea_mbimxsd51_baseboard_init();

arch/arm/mach-mx5/board-mx51_3ds.c

@@ -25,7 +25,6 @@
 #include <mach/3ds_debugboard.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 #define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(1, 6))
 #define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -24,14 +24,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "cpu_op-mx51.h"
 
 #define BABBAGE_USB_HUB_RESET	IMX_GPIO_NR(1, 7)
@@ -176,7 +174,7 @@ static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
-static struct imxi2c_platform_data babbage_hsi2c_data = {
+static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
 	.bitrate = 400000,
 };
 
@@ -249,7 +247,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -272,7 +270,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -288,17 +286,17 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
@@ -357,8 +355,8 @@ static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
 static void __init mx51_babbage_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
-		MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
+		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
 
 	imx51_soc_init();
 
@@ -381,17 +379,17 @@ static void __init mx51_babbage_init(void)
 
 	imx51_add_imx_i2c(0, &babbage_i2c_data);
 	imx51_add_imx_i2c(1, &babbage_i2c_data);
-	mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
+	imx51_add_hsi2c(&babbage_hsi2c_data);
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+		imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	else {
 		initialize_otg_port(NULL);
-		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+		imx51_add_fsl_usb2_udc(&usb_pdata);
 	}
 
 	gpio_usbh1_active();
-	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	imx51_add_mxc_ehci_hs(1, &usbh1_config);
 	/* setback USBH1_STP to be function */
 	mxc_iomux_v3_setup_pad(usbh1stp);
 	babbage_usbhub_reset();

arch/arm/mach-mx5/board-mx51_efikamx.c

@@ -32,14 +32,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 
 #define EFIKAMX_PCBID0		IMX_GPIO_NR(3, 16)

arch/arm/mach-mx5/board-mx51_efikasb.c

@@ -35,14 +35,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 
 #define EFIKASB_USBH2_STP	IMX_GPIO_NR(2, 20)
@@ -119,7 +117,7 @@ static int initialize_usbh2_port(struct platform_device *pdev)
 	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data usbh2_config = {
+static struct mxc_usbh_platform_data usbh2_config __initdata = {
 	.init   = initialize_usbh2_port,
 	.portsc = MXC_EHCI_MODE_ULPI,
 };
@@ -129,7 +127,7 @@ static void __init mx51_efikasb_usb(void)
 	usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
 	if (usbh2_config.otg)
-		mxc_register_device(&mxc_usbh2_device, &usbh2_config);
+		imx51_add_mxc_ehci_hs(2, &usbh2_config);
 }
 
 static const struct gpio_led mx51_efikasb_leds[] __initconst = {

arch/arm/mach-mx5/board-mx53_ard.c

@@ -134,8 +134,8 @@ static struct resource ard_smsc911x_resources[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	{
-		.start =  gpio_to_irq(ARD_ETHERNET_INT_B),
-		.end =  gpio_to_irq(ARD_ETHERNET_INT_B),
+		.start =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+		.end =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1568,7 +1568,7 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 
 	/* System timer */
 	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
-		MX51_MXC_INT_GPT);
+		MX51_INT_GPT);
 	return 0;
 }
 

arch/arm/mach-mx5/devices-imx51.h

@@ -13,9 +13,15 @@ extern const struct imx_fec_data imx51_fec_data;
 #define imx51_add_fec(pdata)	\
 	imx_add_fec(&imx51_fec_data, pdata)
 
+extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
+#define imx51_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
+
 extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
 #define imx51_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
+#define imx51_add_hsi2c(pdata)	\
+	imx51_add_imx_i2c(2, pdata)
 
 extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
 #define imx51_add_imx_ssi(id, pdata)	\
@@ -25,6 +31,13 @@ extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
 #define imx51_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
 
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
+#define imx51_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
+#define imx51_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
+
 extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
 #define imx51_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)

arch/arm/mach-mx5/devices.c

-/*
- * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
-
-static struct resource mxc_hsi2c_resources[] = {
-	{
-		.start = MX51_HSI2C_DMA_BASE_ADDR,
-		.end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_HS_I2C,
-		.end = MX51_MXC_INT_HS_I2C,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_hsi2c_device = {
-	.name = "imx-i2c",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_hsi2c_resources),
-	.resource = mxc_hsi2c_resources
-};
-
-static u64 usb_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource usbotg_resources[] = {
-	{
-		.start = MX51_OTG_BASE_ADDR,
-		.end = MX51_OTG_BASE_ADDR + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_USB_OTG,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-/* OTG gadget device */
-struct platform_device mxc_usbdr_udc_device = {
-	.name		= "fsl-usb2-udc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(usbotg_resources),
-	.resource	= usbotg_resources,
-	.dev		= {
-		.dma_mask		= &usb_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device mxc_usbdr_host_device = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(usbotg_resources),
-	.resource = usbotg_resources,
-	.dev = {
-		.dma_mask = &usb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource usbh1_resources[] = {
-	{
-		.start = MX51_OTG_BASE_ADDR + 0x200,
-		.end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_USB_H1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh1_device = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(usbh1_resources),
-	.resource = usbh1_resources,
-	.dev = {
-		.dma_mask = &usb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource usbh2_resources[] = {
-	{
-		.start = MX51_OTG_BASE_ADDR + 0x400,
-		.end = MX51_OTG_BASE_ADDR + 0x400 + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_USB_H2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2_device = {
-	.name = "mxc-ehci",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(usbh2_resources),
-	.resource = usbh2_resources,
-	.dev = {
-		.dma_mask = &usb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};

arch/arm/mach-mx5/devices.h

-extern struct platform_device mxc_usbdr_host_device;
-extern struct platform_device mxc_usbh1_device;
-extern struct platform_device mxc_usbh2_device;
-extern struct platform_device mxc_usbdr_udc_device;
-extern struct platform_device mxc_hsi2c_device;

arch/arm/mach-mx5/ehci.c

@@ -52,7 +52,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 	void __iomem *usbother_base;
 	int ret = 0;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base) {
 		printk(KERN_ERR "%s(): ioremap failed\n", __func__);
 		return -ENOMEM;

arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c

@@ -28,7 +28,6 @@
 #include <asm/mach/arch.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 #define MBIMX51_TSC2007_GPIO	IMX_GPIO_NR(3, 30)
 #define MBIMX51_LED0		IMX_GPIO_NR(3, 5)
@@ -160,7 +159,7 @@ struct tsc2007_platform_data tsc2007_data = {
 static struct i2c_board_info mbimx51_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tsc2007", 0x49),
-		.irq  = gpio_to_irq(MBIMX51_TSC2007_GPIO),
+		.irq  = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
 		.platform_data = &tsc2007_data,
 	}, {
 		I2C_BOARD_INFO("tlv320aic23", 0x1a),

arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c

@@ -24,7 +24,6 @@
 
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
@@ -41,13 +40,12 @@
 #include <mach/audmux.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* LED */
 	MX51_PAD_NANDF_D10__GPIO3_30,
 	/* SWITCH */
-	_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+	NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 	/* UART2 */
@@ -66,7 +64,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX51_PAD_SD1_DATA2__SD1_DATA2,
 	MX51_PAD_SD1_DATA3__SD1_DATA3,
 	/* SD1 CD */
-	_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };

arch/arm/mach-mx5/mm-mx50.c

-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-/*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
-	imx_map_entry(MX50, TZIC, MT_DEVICE),
-	imx_map_entry(MX50, SPBA0, MT_DEVICE),
-	imx_map_entry(MX50, AIPS1, MT_DEVICE),
-	imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx50_map_io(void)
-{
-	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
-void __init imx50_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX50);
-	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
-void __init mx50_init_irq(void)
-{
-	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
-void __init imx50_soc_init(void)
-{
-	/* i.mx50 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-}

arch/arm/mach-mx5/mm.c

@@ -21,12 +21,27 @@
 #include <mach/devices-common.h>
 #include <mach/iomux-v3.h>
 
+static void imx5_idle(void)
+{
+	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+}
+
+/*
+ * Define the MX50 memory map.
+ */
+static struct map_desc mx50_io_desc[] __initdata = {
+	imx_map_entry(MX50, TZIC, MT_DEVICE),
+	imx_map_entry(MX50, SPBA0, MT_DEVICE),
+	imx_map_entry(MX50, AIPS1, MT_DEVICE),
+	imx_map_entry(MX50, AIPS2, MT_DEVICE),
+};
+
 /*
  * Define the MX51 memory map.
  */
 static struct map_desc mx51_io_desc[] __initdata = {
+	imx_map_entry(MX51, TZIC, MT_DEVICE),
 	imx_map_entry(MX51, IRAM, MT_DEVICE),
-	imx_map_entry(MX51, DEBUG, MT_DEVICE),
 	imx_map_entry(MX51, AIPS1, MT_DEVICE),
 	imx_map_entry(MX51, SPBA0, MT_DEVICE),
 	imx_map_entry(MX51, AIPS2, MT_DEVICE),
@@ -36,6 +51,7 @@ static struct map_desc mx51_io_desc[] __initdata = {
  * Define the MX53 memory map.
  */
 static struct map_desc mx53_io_desc[] __initdata = {
+	imx_map_entry(MX53, TZIC, MT_DEVICE),
 	imx_map_entry(MX53, AIPS1, MT_DEVICE),
 	imx_map_entry(MX53, SPBA0, MT_DEVICE),
 	imx_map_entry(MX53, AIPS2, MT_DEVICE),
@@ -46,21 +62,34 @@ static struct map_desc mx53_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
+void __init mx50_map_io(void)
+{
+	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
+}
+
 void __init mx51_map_io(void)
 {
 	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
 }
 
+void __init mx53_map_io(void)
+{
+	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+}
+
+void __init imx50_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX50);
+	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
+}
+
 void __init imx51_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-}
-
-void __init mx53_map_io(void)
-{
-	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+	imx_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)
@@ -70,35 +99,19 @@ void __init imx53_init_early(void)
 	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
-void __init mx51_init_irq(void)
+void __init mx50_init_irq(void)
 {
-	unsigned long tzic_addr;
-	void __iomem *tzic_virt;
-
-	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
-		tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
-	else
-		tzic_addr = MX51_TZIC_BASE_ADDR;
-
-	tzic_virt = ioremap(tzic_addr, SZ_16K);
-	if (!tzic_virt)
-		panic("unable to map TZIC interrupt controller\n");
+	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
+}
 
-	tzic_init_irq(tzic_virt);
+void __init mx51_init_irq(void)
+{
+	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
 }
 
 void __init mx53_init_irq(void)
 {
-	unsigned long tzic_addr;
-	void __iomem *tzic_virt;
-
-	tzic_addr = MX53_TZIC_BASE_ADDR;
-
-	tzic_virt = ioremap(tzic_addr, SZ_16K);
-	if (!tzic_virt)
-		panic("unable to map TZIC interrupt controller\n");
-
-	tzic_init_irq(tzic_virt);
+	tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
 }
 
 static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
@@ -138,13 +151,24 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = {
 	.script_addrs = &imx53_sdma_script,
 };
 
+void __init imx50_soc_init(void)
+{
+	/* i.mx50 has the i.mx31 type gpio */
+	mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
+}
+
 void __init imx51_soc_init(void)
 {
 	/* i.mx51 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
 
 	/* i.mx51 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);

arch/arm/mach-mx5/mx51_efika.c

@@ -34,14 +34,12 @@
 #include <linux/usb/ulpi.h>
 #include <mach/ulpi.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 #include "cpu_op-mx51.h"
 
@@ -133,7 +131,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	u32 v;
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
@@ -150,7 +148,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init   = initialize_otg_port,
 	.portsc = MXC_EHCI_UTMI_16BIT,
 };
@@ -170,7 +168,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	gpio_set_value(EFIKAMX_USBH1_STP, 1);
 	msleep(1);
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
 
 	/* The clock for the USBH1 ULPI port will come externally */
@@ -189,7 +187,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static struct mxc_usbh_platform_data usbh1_config __initdata = {
 	.init   = initialize_usbh1_port,
 	.portsc = MXC_EHCI_MODE_ULPI,
 };
@@ -217,9 +215,9 @@ static void __init mx51_efika_usb(void)
 	usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
 
-	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	if (usbh1_config.otg)
-		mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+		imx51_add_mxc_ehci_hs(1, &usbh1_config);
 }
 
 static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
@@ -589,7 +587,7 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
 		.bus_num = 0,
 		.chip_select = 0,
 		.platform_data = &mx51_efika_mc13892_data,
-		.irq = gpio_to_irq(EFIKAMX_PMIC),
+		.irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
 	},
 };
 
@@ -631,4 +629,3 @@ void __init efika_board_common_init(void)
 	get_cpu_op = mx51_get_cpu_op;
 #endif
 }
-

arch/arm/mach-mx5/pm-imx5.c

@@ -14,7 +14,8 @@
 #include <linux/err.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
-#include <mach/system.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
 #include "crm_regs.h"
 
 static struct clk *gpc_dvfs_clk;

arch/arm/mach-mx5/system.c

@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include "crm_regs.h"
 
 /* set cpu low power mode before WFI instruction. This function is called

arch/arm/mach-mxs/Makefile

 # Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
 
 obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o
 
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
+obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
+obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
 
 obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o

arch/arm/mach-mxs/include/mach/gpio.h

-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_GPIO_H__
-#define __MACH_MXS_GPIO_H__
-
-#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
-
-#define irq_to_gpio(irq)	((irq) - MXS_GPIO_IRQ_START)
-
-#endif /* __MACH_MXS_GPIO_H__ */
+/* empty */

arch/arm/mach-mxs/include/mach/mxs.h

@@ -86,6 +86,8 @@
 	.type = _type,							\
 }
 
+#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
+
 #define MXS_SET_ADDR		0x4
 #define MXS_CLR_ADDR		0x8
 #define MXS_TOG_ADDR		0xc

arch/arm/mach-mxs/mach-mx23evk.c

@@ -15,7 +15,6 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -182,6 +181,6 @@ MACHINE_START(MX23EVK, "Freescale MX23 EVK")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.map_io		= mx23_map_io,
 	.init_irq	= mx23_init_irq,
-	.init_machine	= mx23evk_init,
 	.timer		= &mx23evk_timer,
+	.init_machine	= mx23evk_init,
 MACHINE_END

arch/arm/mach-mxs/mach-mx28evk.c

@@ -16,7 +16,6 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/irq.h>
 #include <linux/clk.h>
 
 #include <asm/mach-types.h>
@@ -352,6 +351,11 @@ static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
 	},
 };
 
+static struct gpio mx28evk_lcd_gpios[] = {
+	{ MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
+	{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
+};
+
 static void __init mx28evk_init(void)
 {
 	int ret;
@@ -378,18 +382,11 @@ static void __init mx28evk_init(void)
 		mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
 	}
 
-	ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
-	if (ret)
-		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
-	else
-		gpio_set_value(MX28EVK_LCD_ENABLE, 1);
-
-	ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
+	ret = gpio_request_array(mx28evk_lcd_gpios,
+				 ARRAY_SIZE(mx28evk_lcd_gpios));
 	if (ret)
-		pr_warn("failed to request gpio bl-enable: %d\n", ret);
+		pr_warn("failed to request gpio pins for lcd: %d\n", ret);
 	else
-		gpio_set_value(MX28EVK_BL_ENABLE, 1);
-
 		mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
 
 	/* power on mmc slot by writing 0 to the gpio */
@@ -403,6 +400,7 @@ static void __init mx28evk_init(void)
 			       "mmc1-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
+	else
 		mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 
 	gpio_led_register_device(0, &mx28evk_led_data);
@@ -421,6 +419,6 @@ MACHINE_START(MX28EVK, "Freescale MX28 EVK")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.map_io		= mx28_map_io,
 	.init_irq	= mx28_init_irq,
-	.init_machine	= mx28evk_init,
 	.timer		= &mx28evk_timer,
+	.init_machine	= mx28evk_init,
 MACHINE_END

arch/arm/mach-mxs/mach-stmp378x_devb.c

@@ -19,7 +19,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/irq.h>
 #include <linux/spi/spi.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-mxs/mach-tx28.c

@@ -175,6 +175,6 @@ static struct sys_timer tx28_timer = {
 MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
 	.map_io = mx28_map_io,
 	.init_irq = mx28_init_irq,
-	.init_machine = tx28_stk5v3_init,
 	.timer = &tx28_timer,
+	.init_machine = tx28_stk5v3_init,
 MACHINE_END

arch/arm/mach-mxs/mm-mx23.c

-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License.  You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx23.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
-
-/*
- * Define the MX23 memory map.
- */
-static struct map_desc mx23_io_desc[] __initdata = {
-	mxs_map_entry(MX23, OCRAM, MT_DEVICE),
-	mxs_map_entry(MX23, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx23_map_io(void)
-{
-	iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
-}
-
-void __init mx23_init_irq(void)
-{
-	icoll_init_irq();
-}

arch/arm/mach-mxs/mm-mx28.c → arch/arm/mach-mxs/mm.c

@@ -16,10 +16,19 @@
 
 #include <asm/mach/map.h>
 
+#include <mach/mx23.h>
 #include <mach/mx28.h>
 #include <mach/common.h>
 #include <mach/iomux.h>
 
+/*
+ * Define the MX23 memory map.
+ */
+static struct map_desc mx23_io_desc[] __initdata = {
+	mxs_map_entry(MX23, OCRAM, MT_DEVICE),
+	mxs_map_entry(MX23, IO, MT_DEVICE),
+};
+
 /*
  * Define the MX28 memory map.
  */
@@ -33,6 +42,16 @@ static struct map_desc mx28_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
+void __init mx23_map_io(void)
+{
+	iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
+}
+
+void __init mx23_init_irq(void)
+{
+	icoll_init_irq();
+}
+
 void __init mx28_map_io(void)
 {
 	iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));

arch/arm/mach-omap1/mcbsp.c

@@ -31,6 +31,7 @@
 static int dsp_use;
 static struct clk *api_clk;
 static struct clk *dsp_clk;
+static struct platform_device **omap_mcbsp_devices;
 
 static void omap1_mcbsp_request(unsigned int id)
 {
@@ -78,6 +79,17 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 	.free		= omap1_mcbsp_free,
 };
 
+#define OMAP7XX_MCBSP1_BASE	0xfffb1000
+#define OMAP7XX_MCBSP2_BASE	0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE	0xe1011800
+#define OMAP1510_MCBSP2_BASE	0xfffb1000
+#define OMAP1510_MCBSP3_BASE	0xe1017000
+
+#define OMAP1610_MCBSP1_BASE	0xe1011800
+#define OMAP1610_MCBSP2_BASE	0xfffb1000
+#define OMAP1610_MCBSP3_BASE	0xe1017000
+
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 struct resource omap7xx_mcbsp_res[][6] = {
 	{
@@ -369,6 +381,39 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 #define OMAP16XX_MCBSP_COUNT		0
 #endif
 
+static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+			struct omap_mcbsp_platform_data *config, int size)
+{
+	int i;
+
+	omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+				     GFP_KERNEL);
+	if (!omap_mcbsp_devices) {
+		printk(KERN_ERR "Could not register McBSP devices\n");
+		return;
+	}
+
+	for (i = 0; i < size; i++) {
+		struct platform_device *new_mcbsp;
+		int ret;
+
+		new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+		if (!new_mcbsp)
+			continue;
+		platform_device_add_resources(new_mcbsp, &res[i * res_count],
+					res_count);
+		config[i].reg_size = 2;
+		config[i].reg_step = 2;
+		new_mcbsp->dev.platform_data = &config[i];
+		ret = platform_device_add(new_mcbsp);
+		if (ret) {
+			platform_device_put(new_mcbsp);
+			continue;
+		}
+		omap_mcbsp_devices[i] = new_mcbsp;
+	}
+}
+
 static int __init omap1_mcbsp_init(void)
 {
 	if (!cpu_class_is_omap1())

arch/arm/mach-omap2/Makefile

@@ -116,9 +116,12 @@ obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common) \
 obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain.o \
 					   clockdomain2xxx_3xxx.o \
 					   clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= clockdomains2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= clockdomains2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain.o \
 					   clockdomain2xxx_3xxx.o \
-					   clockdomains2xxx_3xxx_data.o
+					   clockdomains2xxx_3xxx_data.o \
+					   clockdomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain.o \
 					   clockdomain44xx.o \
 					   clockdomains44xx_data.o
@@ -185,75 +188,62 @@ endif
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
-obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
-					   hsmmc.o
+obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
-                                           hsmmc.o
-obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
-					   board-flash.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
-					   hsmmc.o \
-					   board-flash.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
+obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o
+obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
+obj-$(CONFIG_MACH_ENCORE)		+= board-omap3encore.o
+obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
+obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
+obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
+obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
-					   sdram-nokia.o \
-					   hsmmc.o
+					   sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   sdram-nokia.o \
 					   board-rx51-peripherals.o \
-					   board-rx51-video.o \
-					   hsmmc.o
+					   board-rx51-video.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o \
 					   board-zoom-peripherals.o \
 					   board-zoom-display.o \
-					   board-flash.o \
-					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o \
 					   board-zoom-peripherals.o \
 					   board-zoom-display.o \
-					   board-flash.o \
-					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
 					   board-zoom-peripherals.o \
-					   board-zoom-display.o \
-					   board-flash.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
-					   hsmmc.o
+					   board-zoom-display.o
+obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
-					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
-					   hsmmc.o
+obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o
+obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
+obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o
+
+obj-$(CONFIG_MACH_PCM049)		+= board-omap4pcm049.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 
 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 
-obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
-					   hsmmc.o
+obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
 obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
+
 # Platform specific device init code
+
+omap-flash-$(CONFIG_MTD_NAND_OMAP2)	:= board-flash.o
+omap-flash-$(CONFIG_MTD_ONENAND_OMAP2)	:= board-flash.o
+obj-y					+= $(omap-flash-y) $(omap-flash-m)
+
+omap-hsmmc-$(CONFIG_MMC_OMAP_HS)	:= hsmmc.o
+obj-y					+= $(omap-hsmmc-m) $(omap-hsmmc-y)
+
+
 usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
 obj-y					+= $(usbfs-m) $(usbfs-y)
 obj-y					+= usb-musb.o

arch/arm/mach-omap2/board-2430sdp.c

@@ -192,12 +192,6 @@ static inline void board_smc91x_init(void)
 
 #endif
 
-static void __init omap_2430sdp_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
@@ -284,6 +278,7 @@ static void __init omap_2430sdp_init(void)
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap2_hsmmc_init(mmc);
 	omap2_usbfs_init(&sdp2430_usb_config);
 
@@ -299,18 +294,12 @@ static void __init omap_2430sdp_init(void)
 	sdp2430_display_init();
 }
 
-static void __init omap_2430sdp_map_io(void)
-{
-	omap2_set_globals_243x();
-	omap243x_map_common_io();
-}
-
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.map_io		= omap_2430sdp_map_io,
-	.init_early	= omap_2430sdp_init_early,
+	.map_io		= omap243x_map_io,
+	.init_early	= omap2430_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap2_timer,

arch/arm/mach-omap2/board-3430sdp.c

@@ -224,12 +224,6 @@ static struct omap_dss_board_info sdp3430_dss_data = {
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 };
 
-static void __init omap_3430sdp_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
-}
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -718,6 +712,7 @@ static void __init omap_3430sdp_init(void)
 		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
 	omap_ads7846_init(1, gpio_pendown, 310, NULL);
 	board_serial_init();
+	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
 	usb_musb_init(NULL);
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
@@ -731,7 +726,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap_3430sdp_init_early,
+	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-3630sdp.c

@@ -70,13 +70,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 static struct omap_board_config_kernel sdp_config[] __initdata = {
 };
 
-static void __init omap_sdp_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
-				  h8mbx00u0mer0em_sdrc_params);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -207,6 +200,8 @@ static void __init omap_sdp_init(void)
 	omap_board_config = sdp_config;
 	omap_board_config_size = ARRAY_SIZE(sdp_config);
 	zoom_peripherals_init();
+	omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+				  h8mbx00u0mer0em_sdrc_params);
 	zoom_display_init();
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
@@ -218,7 +213,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap_sdp_init_early,
+	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-4430sdp.c

@@ -379,12 +379,6 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_vbat,
 };
 
-static void __init omap_4430sdp_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_UTMI,
 	.mode			= MUSB_OTG,
@@ -961,6 +955,7 @@ static void __init omap_4430sdp_init(void)
 	omap_sfh7741prox_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	board_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap4_sdp4430_wifi_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
@@ -982,18 +977,12 @@ static void __init omap_4430sdp_init(void)
 	omap_4430sdp_display_init();
 }
 
-static void __init omap_4430sdp_map_io(void)
-{
-	omap2_set_globals_443x();
-	omap44xx_map_common_io();
-}
-
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.map_io		= omap_4430sdp_map_io,
-	.init_early	= omap_4430sdp_init_early,
+	.map_io		= omap4_map_io,
+	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap4_timer,

arch/arm/mach-omap2/board-am3517crane.c

@@ -47,12 +47,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
-static void __init am3517_crane_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -70,6 +64,7 @@ static void __init am3517_crane_init(void)
 
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 
 	omap_board_config = am3517_crane_config;
 	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
@@ -101,7 +96,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= am3517_crane_init_early,
+	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= am3517_crane_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-am3517evm.c

@@ -362,11 +362,6 @@ static struct omap_dss_board_info am3517_evm_dss_data = {
 /*
  * Board initialization
  */
-static void __init am3517_evm_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
 
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type         = MUSB_INTERFACE_ULPI,
@@ -469,6 +464,7 @@ static void __init am3517_evm_init(void)
 	am3517_evm_i2c_init();
 	omap_display_init(&am3517_evm_dss_data);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
@@ -493,7 +489,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= am3517_evm_init_early,
+	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-apollon.c

@@ -284,12 +284,6 @@ static struct omap_dss_board_info apollon_dss_data = {
 	.default_device	= &apollon_lcd_device,
 };
 
-static void __init omap_apollon_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static struct gpio apollon_gpio_leds[] __initdata = {
 	{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
 	{ LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6  */
@@ -349,22 +343,16 @@ static void __init omap_apollon_init(void)
 	 */
 	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
 	omap_serial_init();
-
+	omap_sdrc_init(NULL, NULL);
 	omap_display_init(&apollon_dss_data);
 }
 
-static void __init omap_apollon_map_io(void)
-{
-	omap2_set_globals_242x();
-	omap242x_map_common_io();
-}
-
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.map_io		= omap_apollon_map_io,
-	.init_early	= omap_apollon_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap2_timer,

arch/arm/mach-omap2/board-cm-t35.c

@@ -471,13 +471,6 @@ static void __init cm_t35_init_i2c(void)
 	omap3_pmic_init("tps65930", &cm_t35_twldata);
 }
 
-static void __init cm_t35_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* nCS and IRQ for CM-T35 ethernet */
@@ -610,6 +603,8 @@ static void __init cm_t3x_common_init(void)
 	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	cm_t35_init_i2c();
 	omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
 	cm_t35_init_ethernet();
@@ -637,7 +632,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= cm_t35_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap3_timer,
@@ -647,7 +642,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
 	.atag_offset    = 0x100,
 	.reserve        = omap_reserve,
 	.map_io         = omap3_map_io,
-	.init_early     = cm_t35_init_early,
+	.init_early     = omap3630_init_early,
 	.init_irq       = omap3_init_irq,
 	.init_machine   = cm_t3730_init,
 	.timer          = &omap3_timer,

arch/arm/mach-omap2/board-cm-t3517.c

@@ -251,12 +251,6 @@ static inline void cm_t3517_init_nand(void) {}
 static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
 };
 
-static void __init cm_t3517_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
@@ -289,6 +283,7 @@ static void __init cm_t3517_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap_board_config = cm_t3517_config;
 	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
 	cm_t3517_init_leds();
@@ -302,7 +297,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.atag_offset	= 0x100,
 	.reserve        = omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= cm_t3517_init_early,
+	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= cm_t3517_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-devkit8000.c

@@ -397,19 +397,6 @@ static struct platform_device keys_gpio = {
 	},
 };
 
-
-static void __init devkit8000_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-}
-
-static void __init devkit8000_init_irq(void)
-{
-	omap3_init_irq();
-}
-
 #define OMAP_DM9000_BASE	0x2c000000
 
 static struct resource omap_dm9000_resources[] = {
@@ -645,6 +632,8 @@ static void __init devkit8000_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 
 	omap_dm9000_init();
 
@@ -670,8 +659,8 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= devkit8000_init_early,
-	.init_irq	= devkit8000_init_irq,
+	.init_early	= omap35xx_init_early,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-flash.c

@@ -148,11 +148,6 @@ __init board_nand_init(struct mtd_partition *nand_parts,
 	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
 	gpmc_nand_init(&board_nand_data);
 }
-#else
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type)
-{
-}
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
 
 /**

arch/arm/mach-omap2/board-flash.h

@@ -24,7 +24,26 @@ struct flash_partitions {
 	int nr_parts;
 };
 
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+		defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
 extern void board_flash_init(struct flash_partitions [],
 				char chip_sel[][GPMC_CS_NUM], int nand_type);
+#else
+static inline void board_flash_init(struct flash_partitions part[],
+				char chip_sel[][GPMC_CS_NUM], int nand_type)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 extern void board_nand_init(struct mtd_partition *nand_parts,
 					u8 nr_parts, u8 cs, int nand_type);
+#else
+static inline void board_nand_init(struct mtd_partition *nand_parts,
+					u8 nr_parts, u8 cs, int nand_type)
+{
+}
+#endif

arch/arm/mach-omap2/board-generic.c

@@ -35,12 +35,12 @@ static struct omap_board_config_kernel generic_config[] = {
 static void __init omap_generic_init_early(void)
 {
 	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
 }
 
 static void __init omap_generic_init(void)
 {
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap_board_config = generic_config;
 	omap_board_config_size = ARRAY_SIZE(generic_config);
 }

arch/arm/mach-omap2/board-h4.c

@@ -300,17 +300,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
 	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
 };
 
-static void __init omap_h4_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
-static void __init omap_h4_init_irq(void)
-{
-	omap2_init_irq();
-}
-
 static struct at24_platform_data m24c01 = {
 	.byte_len	= SZ_1K / 8,
 	.page_size	= 16,
@@ -378,24 +367,19 @@ static void __init omap_h4_init(void)
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
 	omap2_usbfs_init(&h4_usb_config);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	h4_init_flash();
 
 	omap_display_init(&h4_dss_data);
 }
 
-static void __init omap_h4_map_io(void)
-{
-	omap2_set_globals_242x();
-	omap242x_map_common_io();
-}
-
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.map_io		= omap_h4_map_io,
-	.init_early	= omap_h4_init_early,
-	.init_irq	= omap_h4_init_irq,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
+	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-igep0020.c

@@ -491,13 +491,6 @@ static struct platform_device *igep_devices[] __initdata = {
 	&igep_vwlan_device,
 };
 
-static void __init igep_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(m65kxxxxam_sdrc_params,
-				  m65kxxxxam_sdrc_params);
-}
-
 static int igep2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -650,6 +643,8 @@ static void __init igep_init(void)
 	igep_i2c_init();
 	platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
 	omap_serial_init();
+	omap_sdrc_init(m65kxxxxam_sdrc_params,
+				  m65kxxxxam_sdrc_params);
 	usb_musb_init(NULL);
 
 	igep_flash_init();
@@ -675,7 +670,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= igep_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= igep_init,
 	.timer		= &omap3_timer,
@@ -685,7 +680,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= igep_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= igep_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-ldp.c

@@ -251,12 +251,6 @@ static void __init ldp_display_init(void)
 	omap_display_init(&ldp_dss_data);
 }
 
-static void __init omap_ldp_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 {
 	int r;
@@ -425,6 +419,7 @@ static void __init omap_ldp_init(void)
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	omap_ads7846_init(1, 54, 310, NULL);
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions,
 		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
@@ -437,7 +432,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap_ldp_init_early,
+	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-n8x0.c

@@ -616,18 +616,6 @@ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
 	},
 };
 
-static void __init n8x0_map_io(void)
-{
-	omap2_set_globals_242x();
-	omap242x_map_common_io();
-}
-
-static void __init n8x0_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* I2S codec port pins for McBSP block */
@@ -689,6 +677,7 @@ static void __init n8x0_init_machine(void)
 		i2c_register_board_info(2, n810_i2c_board_info_2,
 					ARRAY_SIZE(n810_i2c_board_info_2));
 	board_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	gpmc_onenand_init(board_onenand_data);
 	n8x0_mmc_init();
 	n8x0_usb_init();
@@ -697,8 +686,8 @@ static void __init n8x0_init_machine(void)
 MACHINE_START(NOKIA_N800, "Nokia N800")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.map_io		= n8x0_map_io,
-	.init_early	= n8x0_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
@@ -707,8 +696,8 @@ MACHINE_END
 MACHINE_START(NOKIA_N810, "Nokia N810")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.map_io		= n8x0_map_io,
-	.init_early	= n8x0_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
@@ -717,8 +706,8 @@ MACHINE_END
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.map_io		= n8x0_map_io,
-	.init_early	= n8x0_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,

arch/arm/mach-omap2/board-omap3beagle.c

@@ -447,13 +447,6 @@ static struct platform_device keys_gpio = {
 static void __init omap3_beagle_init_early(void)
 {
 	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_beagle_init_irq(void)
-{
-	omap3_init_irq();
 }
 
 static struct platform_device *omap3_beagle_devices[] __initdata = {
@@ -534,6 +527,8 @@ static void __init omap3_beagle_init(void)
 			ARRAY_SIZE(omap3_beagle_devices));
 	omap_display_init(&beagle_dss_data);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 
 	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
 	/* REVISIT leave DVI powered down until it's needed ... */
@@ -561,7 +556,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_beagle_init_early,
-	.init_irq	= omap3_beagle_init_irq,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3evm.c

@@ -519,12 +519,6 @@ static int __init omap3_evm_i2c_init(void)
 static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
 };
 
-static void __init omap3_evm_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
 static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -639,6 +633,7 @@ static void __init omap3_evm_init(void)
 	omap_display_init(&omap3_evm_dss_data);
 
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
 
 	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
 	usb_nop_xceiv_register();
@@ -683,7 +678,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3_evm_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3_evm_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-omap3logic.c

@@ -182,12 +182,6 @@ static inline void __init board_smsc911x_init(void)
 	gpmc_smsc911x_init(&board_smsc911x_data);
 }
 
-static void __init omap3logic_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -200,6 +194,7 @@ static void __init omap3logic_init(void)
 	omap3torpedo_fix_pbias_voltage();
 	omap3logic_i2c_init();
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	board_mmc_init();
 	board_smsc911x_init();
 
@@ -211,7 +206,7 @@ static void __init omap3logic_init(void)
 MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.atag_offset	= 0x100,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3logic_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap3_timer,
@@ -220,7 +215,7 @@ MACHINE_END
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.atag_offset	= 0x100,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3logic_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-omap3pandora.c

@@ -525,13 +525,6 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 	}
 };
 
-static void __init omap3pandora_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-}
-
 static void __init pandora_wl1251_init(void)
 {
 	struct wl12xx_platform_data pandora_wl1251_pdata;
@@ -593,6 +586,8 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_devices));
 	omap_display_init(&pandora_dss_data);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
@@ -609,7 +604,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3pandora_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3pandora_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-omap3stalker.c

@@ -394,17 +394,6 @@ static int __init omap3_stalker_i2c_init(void)
 static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
 };
 
-static void __init omap3_stalker_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
-static void __init omap3_stalker_init_irq(void)
-{
-	omap3_init_irq();
-}
-
 static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
@@ -444,6 +433,7 @@ static void __init omap3_stalker_init(void)
 	omap_display_init(&omap3_stalker_dss_data);
 
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
@@ -462,8 +452,8 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg@ema-tech.com */
 	.atag_offset		= 0x100,
 	.map_io			= omap3_map_io,
-	.init_early		= omap3_stalker_init_early,
-	.init_irq		= omap3_stalker_init_irq,
+	.init_early		= omap35xx_init_early,
+	.init_irq		= omap3_init_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -311,18 +311,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
-static void __init omap3_touchbook_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_touchbook_init_irq(void)
-{
-	omap3_init_irq();
-}
-
 static struct platform_device *omap3_touchbook_devices[] __initdata = {
 	&leds_gpio,
 	&keys_gpio,
@@ -367,6 +355,8 @@ static void __init omap3_touchbook_init(void)
 	platform_add_devices(omap3_touchbook_devices,
 			ARRAY_SIZE(omap3_touchbook_devices));
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 
 	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
 	/* REVISIT leave DVI powered down until it's needed ... */
@@ -389,8 +379,8 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3_touchbook_init_early,
-	.init_irq	= omap3_touchbook_init_irq,
+	.init_early	= omap3430_init_early,
+	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3_touchbook_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap4panda.c

@@ -95,12 +95,6 @@ static struct platform_device *panda_devices[] __initdata = {
 	&wl1271_device,
 };
 
-static void __init omap4_panda_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -569,24 +563,19 @@ static void __init omap4_panda_init(void)
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
 	platform_device_register(&omap_vwlan_device);
 	board_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
 	usb_musb_init(&musb_board_data);
 	omap4_panda_display_init();
 }
 
-static void __init omap4_panda_map_io(void)
-{
-	omap2_set_globals_443x();
-	omap44xx_map_common_io();
-}
-
 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	/* Maintainer: David Anders - Texas Instruments Inc */
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.map_io		= omap4_panda_map_io,
-	.init_early	= omap4_panda_init_early,
+	.map_io		= omap4_map_io,
+	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
 	.init_machine	= omap4_panda_init,
 	.timer		= &omap4_timer,

arch/arm/mach-omap2/board-overo.c

@@ -479,13 +479,6 @@ static int __init overo_spi_init(void)
 	return 0;
 }
 
-static void __init overo_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-}
-
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -515,6 +508,8 @@ static void __init overo_init(void)
 	overo_i2c_init();
 	omap_display_init(&overo_dss_data);
 	omap_serial_init();
+	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 	omap_nand_flash_init(0, overo_nand_partitions,
 			     ARRAY_SIZE(overo_nand_partitions));
 	usb_musb_init(NULL);
@@ -565,7 +560,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= overo_init_early,
+	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= overo_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-rm680.c

@@ -123,15 +123,6 @@ static void __init rm680_peripherals_init(void)
 	omap2_hsmmc_init(mmc);
 }
 
-static void __init rm680_init_early(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap2_init_common_infrastructure();
-	sdrc_params = nokia_get_sdram_timings();
-	omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -140,23 +131,23 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 static void __init rm680_init(void)
 {
+	struct omap_sdrc_params *sdrc_params;
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
+
+	sdrc_params = nokia_get_sdram_timings();
+	omap_sdrc_init(sdrc_params, sdrc_params);
+
 	usb_musb_init(NULL);
 	rm680_peripherals_init();
 }
 
-static void __init rm680_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.map_io		= rm680_map_io,
-	.init_early	= rm680_init_early,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= rm680_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-rx51.c

@@ -79,15 +79,6 @@ static struct cpuidle_params rx51_cpuidle_params[] = {
 	{7505 + 15274, 484329, 1},
 };
 
-static void __init rx51_init_early(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap2_init_common_infrastructure();
-	sdrc_params = nokia_get_sdram_timings();
-	omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
 extern void __init rx51_peripherals_init(void);
 
 #ifdef CONFIG_OMAP_MUX
@@ -104,9 +95,15 @@ static struct omap_musb_board_data musb_board_data = {
 
 static void __init rx51_init(void)
 {
+	struct omap_sdrc_params *sdrc_params;
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_pm_init_cpuidle(rx51_cpuidle_params);
 	omap_serial_init();
+
+	sdrc_params = nokia_get_sdram_timings();
+	omap_sdrc_init(sdrc_params, sdrc_params);
+
 	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
 
@@ -117,12 +114,6 @@ static void __init rx51_init(void)
 	platform_device_register(&leds_gpio);
 }
 
-static void __init rx51_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-
 static void __init rx51_reserve(void)
 {
 	rx51_video_mem_init();
@@ -133,8 +124,8 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
 	.atag_offset	= 0x100,
 	.reserve	= rx51_reserve,
-	.map_io		= rx51_map_io,
-	.init_early	= rx51_init_early,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= rx51_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/board-ti8168evm.c

@@ -27,15 +27,10 @@
 static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
 };
 
-static void __init ti8168_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	omap2_init_common_devices(NULL, NULL);
-}
-
 static void __init ti8168_evm_init(void)
 {
 	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
 	omap_board_config = ti8168_evm_config;
 	omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
 }
@@ -50,7 +45,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
 	/* Maintainer: Texas Instruments */
 	.atag_offset	= 0x100,
 	.map_io		= ti8168_evm_map_io,
-	.init_early	= ti8168_init_early,
+	.init_early	= ti816x_init_early,
 	.init_irq	= ti816x_init_irq,
 	.timer		= &omap3_timer,
 	.init_machine	= ti8168_evm_init,

arch/arm/mach-omap2/board-zoom.c

@@ -34,17 +34,6 @@
 
 #define ZOOM3_EHCI_RESET_GPIO		64
 
-static void __init omap_zoom_init_early(void)
-{
-	omap2_init_common_infrastructure();
-	if (machine_is_omap_zoom2())
-		omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
-					  mt46h32m32lf6_sdrc_params);
-	else if (machine_is_omap_zoom3())
-		omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
-					  h8mbx00u0mer0em_sdrc_params);
-}
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	/* WLAN IRQ - GPIO 162 */
@@ -129,6 +118,14 @@ static void __init omap_zoom_init(void)
 						ZOOM_NAND_CS, NAND_BUSWIDTH_16);
 	zoom_debugboard_init();
 	zoom_peripherals_init();
+
+	if (machine_is_omap_zoom2())
+		omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+					  mt46h32m32lf6_sdrc_params);
+	else if (machine_is_omap_zoom3())
+		omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+					  h8mbx00u0mer0em_sdrc_params);
+
 	zoom_display_init();
 }
 
@@ -136,7 +133,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap_zoom_init_early,
+	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap3_timer,
@@ -146,7 +143,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap_zoom_init_early,
+	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap3_timer,

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3472,7 +3472,16 @@ int __init omap3xxx_clk_init(void)
 	struct omap_clk *c;
 	u32 cpu_clkflg = 0;
 
-	if (cpu_is_omap3517()) {
+	/*
+	 * 3505 must be tested before 3517, since 3517 returns true
+	 * for both AM3517 chips and AM3517 family chips, which
+	 * includes 3505.  Unfortunately there's no obvious family
+	 * test for 3517/3505 :-(
+	 */
+	if (cpu_is_omap3505()) {
+		cpu_mask = RATE_IN_34XX;
+		cpu_clkflg = CK_3505;
+	} else if (cpu_is_omap3517()) {
 		cpu_mask = RATE_IN_34XX;
 		cpu_clkflg = CK_3517;
 	} else if (cpu_is_omap3505()) {

arch/arm/mach-omap2/clockdomain.c

@@ -73,9 +73,6 @@ static int _clkdm_register(struct clockdomain *clkdm)
 	if (!clkdm || !clkdm->name)
 		return -EINVAL;
 
-	if (!omap_chip_is(clkdm->omap_chip))
-		return -EINVAL;
-
 	pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
 	if (!pwrdm) {
 		pr_err("clockdomain: %s: powerdomain %s does not exist\n",
@@ -105,13 +102,10 @@ static struct clkdm_dep *_clkdm_deps_lookup(struct clockdomain *clkdm,
 {
 	struct clkdm_dep *cd;
 
-	if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip))
+	if (!clkdm || !deps)
 		return ERR_PTR(-EINVAL);
 
 	for (cd = deps; cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
-
 		if (!cd->clkdm && cd->clkdm_name)
 			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
 
@@ -148,9 +142,6 @@ static void _autodep_lookup(struct clkdm_autodep *autodep)
 	if (!autodep)
 		return;
 
-	if (!omap_chip_is(autodep->omap_chip))
-		return;
-
 	clkdm = clkdm_lookup(autodep->clkdm.name);
 	if (!clkdm) {
 		pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
@@ -182,9 +173,6 @@ void _clkdm_add_autodeps(struct clockdomain *clkdm)
 		if (IS_ERR(autodep->clkdm.ptr))
 			continue;
 
-		if (!omap_chip_is(autodep->omap_chip))
-			continue;
-
 		pr_debug("clockdomain: adding %s sleepdep/wkdep for "
 			 "clkdm %s\n", autodep->clkdm.ptr->name,
 			 clkdm->name);
@@ -216,9 +204,6 @@ void _clkdm_del_autodeps(struct clockdomain *clkdm)
 		if (IS_ERR(autodep->clkdm.ptr))
 			continue;
 
-		if (!omap_chip_is(autodep->omap_chip))
-			continue;
-
 		pr_debug("clockdomain: removing %s sleepdep/wkdep for "
 			 "clkdm %s\n", autodep->clkdm.ptr->name,
 			 clkdm->name);
@@ -243,8 +228,6 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm,
 	struct clkdm_dep *cd;
 
 	for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
 		if (cd->clkdm)
 			continue;
 		cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -257,43 +240,113 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm,
 /* Public functions */
 
 /**
- * clkdm_init - set up the clockdomain layer
- * @clkdms: optional pointer to an array of clockdomains to register
- * @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specific implementations
+ * clkdm_register_platform_funcs - register clockdomain implementation fns
+ * @co: func pointers for arch specific implementations
  *
- * Set up internal state.  If a pointer to an array of clockdomains
- * @clkdms was supplied, loop through the list of clockdomains,
- * register all that are available on the current platform. Similarly,
- * if a pointer to an array of clockdomain autodependencies
- * @init_autodeps was provided, register those.  No return value.
+ * Register the list of function pointers used to implement the
+ * clockdomain functions on different OMAP SoCs.  Should be called
+ * before any other clkdm_register*() function.  Returns -EINVAL if
+ * @co is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
  */
-void clkdm_init(struct clockdomain **clkdms,
-		struct clkdm_autodep *init_autodeps,
-		struct clkdm_ops *custom_funcs)
+int clkdm_register_platform_funcs(struct clkdm_ops *co)
+{
+	if (!co)
+		return -EINVAL;
+
+	if (arch_clkdm)
+		return -EEXIST;
+
+	arch_clkdm = co;
+
+	return 0;
+};
+
+/**
+ * clkdm_register_clkdms - register SoC clockdomains
+ * @cs: pointer to an array of struct clockdomain to register
+ *
+ * Register the clockdomains available on a particular OMAP SoC.  Must
+ * be called after clkdm_register_platform_funcs().  May be called
+ * multiple times.  Returns -EACCES if called before
+ * clkdm_register_platform_funcs(); -EINVAL if the argument @cs is
+ * null; or 0 upon success.
+ */
+int clkdm_register_clkdms(struct clockdomain **cs)
 {
 	struct clockdomain **c = NULL;
-	struct clockdomain *clkdm;
-	struct clkdm_autodep *autodep = NULL;
 
-	if (!custom_funcs)
-		WARN(1, "No custom clkdm functions registered\n");
-	else
-		arch_clkdm = custom_funcs;
+	if (!arch_clkdm)
+		return -EACCES;
+
+	if (!cs)
+		return -EINVAL;
 
-	if (clkdms)
-		for (c = clkdms; *c; c++)
+	for (c = cs; *c; c++)
 		_clkdm_register(*c);
 
-	autodeps = init_autodeps;
+	return 0;
+}
+
+/**
+ * clkdm_register_autodeps - register autodeps (if required)
+ * @ia: pointer to a static array of struct clkdm_autodep to register
+ *
+ * Register clockdomain "automatic dependencies."  These are
+ * clockdomain wakeup and sleep dependencies that are automatically
+ * added whenever the first clock inside a clockdomain is enabled, and
+ * removed whenever the last clock inside a clockdomain is disabled.
+ * These are currently only used on OMAP3 devices, and are deprecated,
+ * since they waste energy.  However, until the OMAP2/3 IP block
+ * enable/disable sequence can be converted to match the OMAP4
+ * sequence, they are needed.
+ *
+ * Must be called only after all of the SoC clockdomains are
+ * registered, since the function will resolve autodep clockdomain
+ * names into clockdomain pointers.
+ *
+ * The struct clkdm_autodep @ia array must be static, as this function
+ * does not copy the array elements.
+ *
+ * Returns -EACCES if called before any clockdomains have been
+ * registered, -EINVAL if called with a null @ia argument, -EEXIST if
+ * autodeps have already been registered, or 0 upon success.
+ */
+int clkdm_register_autodeps(struct clkdm_autodep *ia)
+{
+	struct clkdm_autodep *a = NULL;
+
+	if (list_empty(&clkdm_list))
+		return -EACCES;
+
+	if (!ia)
+		return -EINVAL;
+
 	if (autodeps)
-		for (autodep = autodeps; autodep->clkdm.ptr; autodep++)
-			_autodep_lookup(autodep);
+		return -EEXIST;
 
-	/*
-	 * Put all clockdomains into software-supervised mode; PM code
-	 * should later enable hardware-supervised mode as appropriate
+	autodeps = ia;
+	for (a = autodeps; a->clkdm.ptr; a++)
+		_autodep_lookup(a);
+
+	return 0;
+}
+
+/**
+ * clkdm_complete_init - set up the clockdomain layer
+ *
+ * Put all clockdomains into software-supervised mode; PM code should
+ * later enable hardware-supervised mode as appropriate.  Must be
+ * called after clkdm_register_clkdms().  Returns -EACCES if called
+ * before clkdm_register_clkdms(), or 0 upon success.
  */
+int clkdm_complete_init(void)
+{
+	struct clockdomain *clkdm;
+
+	if (list_empty(&clkdm_list))
+		return -EACCES;
+
 	list_for_each_entry(clkdm, &clkdm_list, node) {
 		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
 			clkdm_wakeup(clkdm);
@@ -306,6 +359,8 @@ void clkdm_init(struct clockdomain **clkdms,
 		_resolve_clkdm_deps(clkdm, clkdm->sleepdep_srcs);
 		clkdm_clear_all_sleepdeps(clkdm);
 	}
+
+	return 0;
 }
 
 /**

arch/arm/mach-omap2/clockdomain.h

@@ -45,7 +45,6 @@
 /**
  * struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
  * @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
- * @omap_chip: OMAP chip types that this autodep is valid on
  *
  * A clockdomain that should have wkdeps and sleepdeps added when a
  * clockdomain should stay active in hwsup mode; and conversely,
@@ -60,14 +59,12 @@ struct clkdm_autodep {
 		const char *name;
 		struct clockdomain *ptr;
 	} clkdm;
-	const struct omap_chip_id omap_chip;
 };
 
 /**
  * struct clkdm_dep - encode dependencies between clockdomains
  * @clkdm_name: clockdomain name
  * @clkdm: pointer to the struct clockdomain of @clkdm_name
- * @omap_chip: OMAP chip types that this dependency is valid on
  * @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
  * @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
  *
@@ -81,7 +78,6 @@ struct clkdm_dep {
 	struct clockdomain *clkdm;
 	atomic_t wkdep_usecount;
 	atomic_t sleepdep_usecount;
-	const struct omap_chip_id omap_chip;
 };
 
 /* Possible flags for struct clockdomain._flags */
@@ -101,7 +97,6 @@ struct clkdm_dep {
  * @clkdm_offs: (OMAP4 only) CM clockdomain register offset
  * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
  * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
- * @omap_chip: OMAP chip types that this clockdomain is valid on
  * @usecount: Usecount tracking
  * @node: list_head to link all clockdomains together
  *
@@ -126,7 +121,6 @@ struct clockdomain {
 	const u16 clkdm_offs;
 	struct clkdm_dep *wkdep_srcs;
 	struct clkdm_dep *sleepdep_srcs;
-	const struct omap_chip_id omap_chip;
 	atomic_t usecount;
 	struct list_head node;
 	spinlock_t lock;
@@ -166,8 +160,11 @@ struct clkdm_ops {
 	int	(*clkdm_clk_disable)(struct clockdomain *clkdm);
 };
 
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps,
-			struct clkdm_ops *custom_funcs);
+int clkdm_register_platform_funcs(struct clkdm_ops *co);
+int clkdm_register_autodeps(struct clkdm_autodep *ia);
+int clkdm_register_clkdms(struct clockdomain **c);
+int clkdm_complete_init(void);
+
 struct clockdomain *clkdm_lookup(const char *name);
 
 int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
@@ -195,7 +192,8 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
 int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
 int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
 
-extern void __init omap2xxx_clockdomains_init(void);
+extern void __init omap242x_clockdomains_init(void);
+extern void __init omap243x_clockdomains_init(void);
 extern void __init omap3xxx_clockdomains_init(void);
 extern void __init omap44xx_clockdomains_init(void);
 extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
@@ -205,4 +203,10 @@ extern struct clkdm_ops omap2_clkdm_operations;
 extern struct clkdm_ops omap3_clkdm_operations;
 extern struct clkdm_ops omap4_clkdm_operations;
 
+extern struct clkdm_dep gfx_24xx_wkdeps[];
+extern struct clkdm_dep dsp_24xx_wkdeps[];
+extern struct clockdomain wkup_common_clkdm;
+extern struct clockdomain prm_common_clkdm;
+extern struct clockdomain cm_common_clkdm;
+
 #endif

arch/arm/mach-omap2/clockdomain2xxx_3xxx.c

@@ -52,8 +52,6 @@ static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 	u32 mask = 0;
 
 	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
 		if (!cd->clkdm)
 			continue; /* only happens if data is erroneous */
 
@@ -98,8 +96,6 @@ static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
 	u32 mask = 0;
 
 	for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
 		if (!cd->clkdm)
 			continue; /* only happens if data is erroneous */
 

arch/arm/mach-omap2/clockdomain44xx.c

@@ -52,8 +52,6 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
 	u32 mask = 0;
 
 	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
 		if (!cd->clkdm)
 			continue; /* only happens if data is erroneous */
 

arch/arm/mach-omap2/clockdomains2420_data.c

+/*
+ * OMAP2420 clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2420 chips.  Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned.  So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ *    from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2420-specific possible wakeup dependencies */
+
+/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */
+static struct clkdm_dep mpu_2420_wkdeps[] = {
+	{ .clkdm_name = "core_l3_clkdm" },
+	{ .clkdm_name = "core_l4_clkdm" },
+	{ .clkdm_name = "dsp_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ NULL },
+};
+
+/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */
+static struct clkdm_dep core_2420_wkdeps[] = {
+	{ .clkdm_name = "dsp_clkdm" },
+	{ .clkdm_name = "gfx_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ NULL },
+};
+
+/*
+ * 2420-only clockdomains
+ */
+
+static struct clockdomain mpu_2420_clkdm = {
+	.name		= "mpu_clkdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.wkdep_srcs	= mpu_2420_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+static struct clockdomain iva1_2420_clkdm = {
+	.name		= "iva1_clkdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+	.wkdep_srcs	= dsp_24xx_wkdeps,
+	.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
+};
+
+static struct clockdomain dsp_2420_clkdm = {
+	.name		= "dsp_clkdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2420_clkdm = {
+	.name		= "gfx_clkdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= gfx_24xx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+static struct clockdomain core_l3_2420_clkdm = {
+	.name		= "core_l3_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.wkdep_srcs	= core_2420_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+static struct clockdomain core_l4_2420_clkdm = {
+	.name		= "core_l4_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.wkdep_srcs	= core_2420_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2420_clkdm = {
+	.name		= "dss_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap242x[] __initdata = {
+	&wkup_common_clkdm,
+	&cm_common_clkdm,
+	&prm_common_clkdm,
+	&mpu_2420_clkdm,
+	&iva1_2420_clkdm,
+	&dsp_2420_clkdm,
+	&gfx_2420_clkdm,
+	&core_l3_2420_clkdm,
+	&core_l4_2420_clkdm,
+	&dss_2420_clkdm,
+	NULL,
+};
+
+void __init omap242x_clockdomains_init(void)
+{
+	if (!cpu_is_omap242x())
+		return;
+
+	clkdm_register_platform_funcs(&omap2_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_omap242x);
+	clkdm_complete_init();
+}

arch/arm/mach-omap2/clockdomains2430_data.c

+/*
+ * OMAP2xxx clockdomains
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2xxx chips.  Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned.  So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ *    from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2430-specific possible wakeup dependencies */
+
+/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */
+static struct clkdm_dep core_2430_wkdeps[] = {
+	{ .clkdm_name = "dsp_clkdm" },
+	{ .clkdm_name = "gfx_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ .clkdm_name = "mdm_clkdm" },
+	{ NULL },
+};
+
+/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */
+static struct clkdm_dep mpu_2430_wkdeps[] = {
+	{ .clkdm_name = "core_l3_clkdm" },
+	{ .clkdm_name = "core_l4_clkdm" },
+	{ .clkdm_name = "dsp_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ .clkdm_name = "mdm_clkdm" },
+	{ NULL },
+};
+
+/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
+static struct clkdm_dep mdm_2430_wkdeps[] = {
+	{ .clkdm_name = "core_l3_clkdm" },
+	{ .clkdm_name = "core_l4_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
+	{ NULL },
+};
+
+/*
+ * 2430-only clockdomains
+ */
+
+static struct clockdomain mpu_2430_clkdm = {
+	.name		= "mpu_clkdm",
+	.pwrdm		= { .name = "mpu_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= mpu_2430_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_MDM */
+static struct clockdomain mdm_clkdm = {
+	.name		= "mdm_clkdm",
+	.pwrdm		= { .name = "mdm_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.dep_bit	= OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+	.wkdep_srcs	= mdm_2430_wkdeps,
+	.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
+};
+
+static struct clockdomain dsp_2430_clkdm = {
+	.name		= "dsp_clkdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+	.wkdep_srcs	= dsp_24xx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2430_clkdm = {
+	.name		= "gfx_clkdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.wkdep_srcs	= gfx_24xx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_2430_clkdm = {
+	.name		= "core_l3_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
+	.wkdep_srcs	= core_2430_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_2430_clkdm = {
+	.name		= "core_l4_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
+	.wkdep_srcs	= core_2430_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2430_clkdm = {
+	.name		= "dss_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap243x[] __initdata = {
+	&wkup_common_clkdm,
+	&cm_common_clkdm,
+	&prm_common_clkdm,
+	&mpu_2430_clkdm,
+	&mdm_clkdm,
+	&dsp_2430_clkdm,
+	&gfx_2430_clkdm,
+	&core_l3_2430_clkdm,
+	&core_l4_2430_clkdm,
+	&dss_2430_clkdm,
+	NULL,
+};
+
+void __init omap243x_clockdomains_init(void)
+{
+	if (!cpu_is_omap243x())
+		return;
+
+	clkdm_register_platform_funcs(&omap2_clkdm_operations);
+	clkdm_register_clkdms(clockdomains_omap243x);
+	clkdm_complete_init();
+}
+

arch/arm/mach-omap2/common.c

@@ -56,6 +56,12 @@ void __init omap2_set_globals_242x(void)
 {
 	__omap2_set_globals(&omap242x_globals);
 }
+
+void __init omap242x_map_io(void)
+{
+	omap2_set_globals_242x();
+	omap242x_map_common_io();
+}
 #endif
 
 #if defined(CONFIG_SOC_OMAP2430)
@@ -74,6 +80,12 @@ void __init omap2_set_globals_243x(void)
 {
 	__omap2_set_globals(&omap243x_globals);
 }
+
+void __init omap243x_map_io(void)
+{
+	omap2_set_globals_243x();
+	omap243x_map_common_io();
+}
 #endif
 
 #if defined(CONFIG_ARCH_OMAP3)
@@ -138,5 +150,11 @@ void __init omap2_set_globals_443x(void)
 	omap2_set_globals_control(&omap4_globals);
 	omap2_set_globals_prcm(&omap4_globals);
 }
+
+void __init omap4_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap44xx_map_common_io();
+}
 #endif
 

arch/arm/mach-omap2/display.c

@@ -127,7 +127,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 {
 	int r = 0;
 	struct omap_hwmod *oh;
-	struct omap_device *od;
+	struct platform_device *pdev;
 	int i, oh_count;
 	struct omap_display_platform_data pdata;
 	const struct omap_dss_hwmod_data *curr_dss_hwmod;
@@ -162,13 +162,13 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 			return -ENODEV;
 		}
 
-		od = omap_device_build(curr_dss_hwmod[i].dev_name,
+		pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
 				curr_dss_hwmod[i].id, oh, &pdata,
 				sizeof(struct omap_display_platform_data),
 				omap_dss_latency,
 				ARRAY_SIZE(omap_dss_latency), 0);
 
-		if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
+		if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
 				curr_dss_hwmod[i].oh_name))
 			return -ENODEV;
 	}