Commit 95323361 authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab

[media] media: i2c: Convert to gpio_request_one()

Replace gpio_request() with gpio_request_one() and remove the associated
gpio_direction_output() calls.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent c7e3cc3c
......@@ -474,9 +474,9 @@ static int adv7183_s_stream(struct v4l2_subdev *sd, int enable)
struct adv7183 *decoder = to_adv7183(sd);
if (enable)
gpio_direction_output(decoder->oe_pin, 0);
gpio_set_value(decoder->oe_pin, 0);
else
gpio_direction_output(decoder->oe_pin, 1);
gpio_set_value(decoder->oe_pin, 1);
udelay(1);
return 0;
}
......@@ -580,13 +580,15 @@ static int adv7183_probe(struct i2c_client *client,
decoder->reset_pin = pin_array[0];
decoder->oe_pin = pin_array[1];
if (gpio_request(decoder->reset_pin, "ADV7183 Reset")) {
if (gpio_request_one(decoder->reset_pin, GPIOF_OUT_INIT_LOW,
"ADV7183 Reset")) {
v4l_err(client, "failed to request GPIO %d\n", decoder->reset_pin);
ret = -EBUSY;
goto err_free_decoder;
}
if (gpio_request(decoder->oe_pin, "ADV7183 Output Enable")) {
if (gpio_request_one(decoder->oe_pin, GPIOF_OUT_INIT_HIGH,
"ADV7183 Output Enable")) {
v4l_err(client, "failed to request GPIO %d\n", decoder->oe_pin);
ret = -EBUSY;
goto err_free_reset;
......@@ -619,12 +621,10 @@ static int adv7183_probe(struct i2c_client *client,
decoder->input = ADV7183_COMPOSITE4;
decoder->output = ADV7183_8BIT_OUT;
gpio_direction_output(decoder->oe_pin, 1);
/* reset chip */
gpio_direction_output(decoder->reset_pin, 0);
/* reset pulse width at least 5ms */
mdelay(10);
gpio_direction_output(decoder->reset_pin, 1);
gpio_set_value(decoder->reset_pin, 1);
/* wait 5ms before any further i2c writes are performed */
mdelay(5);
......
......@@ -930,6 +930,7 @@ static int m5mols_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct m5mols_platform_data *pdata = client->dev.platform_data;
unsigned long gpio_flags;
struct m5mols_info *info;
struct v4l2_subdev *sd;
int ret;
......@@ -956,12 +957,13 @@ static int m5mols_probe(struct i2c_client *client,
info->pdata = pdata;
info->set_power = pdata->set_power;
ret = gpio_request(pdata->gpio_reset, "M5MOLS_NRST");
gpio_flags = pdata->reset_polarity
? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
ret = gpio_request_one(pdata->gpio_reset, gpio_flags, "M5MOLS_NRST");
if (ret) {
dev_err(&client->dev, "Failed to request gpio: %d\n", ret);
goto out_free;
}
gpio_direction_output(pdata->gpio_reset, pdata->reset_polarity);
ret = regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies), supplies);
if (ret) {
......
......@@ -746,24 +746,24 @@ static int noon010_probe(struct i2c_client *client,
info->curr_win = &noon010_sizes[0];
if (gpio_is_valid(pdata->gpio_nreset)) {
ret = gpio_request(pdata->gpio_nreset, "NOON010PC30 NRST");
ret = gpio_request_one(pdata->gpio_nreset, GPIOF_OUT_INIT_LOW,
"NOON010PC30 NRST");
if (ret) {
dev_err(&client->dev, "GPIO request error: %d\n", ret);
goto np_err;
}
info->gpio_nreset = pdata->gpio_nreset;
gpio_direction_output(info->gpio_nreset, 0);
gpio_export(info->gpio_nreset, 0);
}
if (gpio_is_valid(pdata->gpio_nstby)) {
ret = gpio_request(pdata->gpio_nstby, "NOON010PC30 NSTBY");
ret = gpio_request_one(pdata->gpio_nstby, GPIOF_OUT_INIT_LOW,
"NOON010PC30 NSTBY");
if (ret) {
dev_err(&client->dev, "GPIO request error: %d\n", ret);
goto np_gpio_err;
}
info->gpio_nstby = pdata->gpio_nstby;
gpio_direction_output(info->gpio_nstby, 0);
gpio_export(info->gpio_nstby, 0);
}
......
......@@ -805,12 +805,11 @@ static int vs6624_probe(struct i2c_client *client,
if (ce == NULL)
return -EINVAL;
ret = gpio_request(*ce, "VS6624 Chip Enable");
ret = gpio_request_one(*ce, GPIOF_OUT_INIT_HIGH, "VS6624 Chip Enable");
if (ret) {
v4l_err(client, "failed to request GPIO %d\n", *ce);
return ret;
}
gpio_direction_output(*ce, 1);
/* wait 100ms before any further i2c writes are performed */
mdelay(100);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment