Merge remote-tracking branches 'regulator/topic/as3711',...

Merge remote-tracking branches 'regulator/topic/as3711', 'regulator/topic/axp20x', 'regulator/topic/bcm590xx' and 'regulator/topic/da9211' into regulator-next

Documentation/devicetree/bindings/regulator/da9211.txt

+* Dialog Semiconductor DA9211/DA9213 Voltage Regulator
+
+Required properties:
+- compatible: "dlg,da9211" or "dlg,da9213".
+- reg: I2C slave address, usually 0x68.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  BUCKA and BUCKB.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+
+Example 1) DA9211
+
+	pmic: da9211@68 {
+		compatible = "dlg,da9211";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <2000000>;
+				regulator-max-microamp 	= <5000000>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <2000000>;
+				regulator-max-microamp 	= <5000000>;
+			};
+		};
+	};
+
+Example 2) DA92113
+	pmic: da9213@68 {
+		compatible = "dlg,da9213";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+			};
+		};
+	};

drivers/regulator/Kconfig

@@ -199,13 +199,14 @@ config REGULATOR_DA9210
 	  interface.
 
 config REGULATOR_DA9211
-	tristate "Dialog Semiconductor DA9211/DA9212 regulator"
+	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214 regulator"
 	depends on I2C
 	select REGMAP_I2C
 	help
-	  Say y here to support for the Dialog Semiconductor DA9211/DA9212.
-	  The DA9211/DA9212 is a multi-phase synchronous step down
-	  converter 12A DC-DC Buck controlled through an I2C
+	  Say y here to support for the Dialog Semiconductor DA9211/DA9212
+	  /DA9213/DA9214.
+	  The DA9211/DA9212/DA9213/DA9214 is a multi-phase synchronous
+	  step down converter 12A or 16A DC-DC Buck controlled through an I2C
 	  interface.
 
 config REGULATOR_DBX500_PRCMU

drivers/regulator/as3711-regulator.c

@@ -22,12 +22,10 @@
 
 struct as3711_regulator_info {
 	struct regulator_desc	desc;
-	unsigned int		max_uV;
 };
 
 struct as3711_regulator {
 	struct as3711_regulator_info *reg_info;
-	struct regulator_dev *rdev;
 };
 
 /*
@@ -132,7 +130,7 @@ static const struct regulator_linear_range as3711_dldo_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1750000, 0x20, 0x3f, 50000),
 };
 
-#define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _vshift, _min_uV, _max_uV, _sfx)	\
+#define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _sfx)			   \
 	[AS3711_REGULATOR_ ## _id] = {					   \
 	.desc = {							   \
 		.name = "as3711-regulator-" # _id,			   \
@@ -142,29 +140,27 @@ static const struct regulator_linear_range as3711_dldo_ranges[] = {
 		.type = REGULATOR_VOLTAGE,				   \
 		.owner = THIS_MODULE,					   \
 		.vsel_reg = AS3711_ ## _id ## _VOLTAGE,			   \
-		.vsel_mask = _vmask << _vshift,						\
+		.vsel_mask = _vmask,					   \
 		.enable_reg = AS3711_ ## _en_reg,			   \
 		.enable_mask = BIT(_en_bit),				   \
-		.min_uV	= _min_uV,							\
 		.linear_ranges = as3711_ ## _sfx ## _ranges,		   \
 		.n_linear_ranges = ARRAY_SIZE(as3711_ ## _sfx ## _ranges), \
 	},								   \
-	.max_uV = _max_uV,								\
 }
 
 static struct as3711_regulator_info as3711_reg_info[] = {
-	AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, 0, 612500, 3350000, sd),
-	AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, 0, 612500, 3350000, sd),
-	AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, 0, 612500, 3350000, sd),
-	AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, 0, 612500, 3350000, sd),
-	AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo),
-	AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo),
-	AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
-	AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
-	AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
-	AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
-	AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
-	AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+	AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, sd),
+	AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, sd),
+	AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, sd),
+	AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, sd),
+	AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, aldo),
+	AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, aldo),
+	AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, dldo),
+	AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, dldo),
+	AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, dldo),
+	AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, dldo),
+	AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, dldo),
+	AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, dldo),
 	/* StepUp output voltage depends on supplying regulator */
 };
 
@@ -263,7 +259,6 @@ static int as3711_regulator_probe(struct platform_device *pdev)
 				ri->desc.name);
 			return PTR_ERR(rdev);
 		}
-		reg->rdev = rdev;
 	}
 	platform_set_drvdata(pdev, regs);
 	return 0;

drivers/regulator/axp20x-regulator.c

@@ -245,7 +245,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 	for (i = 0; i < AXP20X_REG_ID_MAX; i++) {
 		init_data = axp20x_matches[i].init_data;
 
-		config.dev = &pdev->dev;
+		config.dev = pdev->dev.parent;
 		config.init_data = init_data;
 		config.regmap = axp20x->regmap;
 		config.of_node = axp20x_matches[i].of_node;

drivers/regulator/bcm590xx-regulator.c

@@ -202,7 +202,6 @@ static struct bcm590xx_info bcm590xx_regs[] = {
 struct bcm590xx_reg {
 	struct regulator_desc *desc;
 	struct bcm590xx *mfd;
-	struct bcm590xx_info **info;
 };
 
 static int bcm590xx_get_vsel_register(int id)
@@ -389,11 +388,6 @@ static int bcm590xx_probe(struct platform_device *pdev)
 	if (!pmu->desc)
 		return -ENOMEM;
 
-	pmu->info = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS *
-			sizeof(struct bcm590xx_info *), GFP_KERNEL);
-	if (!pmu->info)
-		return -ENOMEM;
-
 	info = bcm590xx_regs;
 
 	for (i = 0; i < BCM590XX_NUM_REGS; i++, info++) {
@@ -403,8 +397,6 @@ static int bcm590xx_probe(struct platform_device *pdev)
 			reg_data = NULL;
 
 		/* Register the regulators */
-		pmu->info[i] = info;
-
 		pmu->desc[i].name = info->name;
 		pmu->desc[i].supply_name = info->vin_name;
 		pmu->desc[i].id = i;

drivers/regulator/da9211-regulator.c

 /*
- * da9211-regulator.c - Regulator device driver for DA9211
+ * da9211-regulator.c - Regulator device driver for DA9211/DA9213
  * Copyright (C) 2014  Dialog Semiconductor Ltd.
  *
  * This library is free software; you can redistribute it and/or
@@ -24,9 +24,14 @@
 #include <linux/regmap.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/regulator/da9211.h>
 #include "da9211-regulator.h"
 
+/* DEVICE IDs */
+#define DA9211_DEVICE_ID	0x22
+#define DA9213_DEVICE_ID	0x23
+
 #define DA9211_BUCK_MODE_SLEEP	1
 #define DA9211_BUCK_MODE_SYNC	2
 #define DA9211_BUCK_MODE_AUTO	3
@@ -42,6 +47,7 @@ struct da9211 {
 	struct regulator_dev *rdev[DA9211_MAX_REGULATORS];
 	int num_regulator;
 	int chip_irq;
+	int chip_id;
 };
 
 static const struct regmap_range_cfg da9211_regmap_range[] = {
@@ -52,14 +58,14 @@ static const struct regmap_range_cfg da9211_regmap_range[] = {
 		.window_start = 0,
 		.window_len = 256,
 		.range_min = 0,
-		.range_max = 2*256,
+		.range_max = 5*128,
 	},
 };
 
 static const struct regmap_config da9211_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
-	.max_register = 2 * 256,
+	.max_register = 5 * 128,
 	.ranges = da9211_regmap_range,
 	.num_ranges = ARRAY_SIZE(da9211_regmap_range),
 };
@@ -69,11 +75,20 @@ static const struct regmap_config da9211_regmap_config = {
 #define DA9211_MAX_MV		1570
 #define DA9211_STEP_MV		10
 
-/* Current limits for buck (uA) indices corresponds with register values */
+/* Current limits for DA9211 buck (uA) indices
+ * corresponds with register values
+ */
 static const int da9211_current_limits[] = {
 	2000000, 2200000, 2400000, 2600000, 2800000, 3000000, 3200000, 3400000,
 	3600000, 3800000, 4000000, 4200000, 4400000, 4600000, 4800000, 5000000
 };
+/* Current limits for DA9213 buck (uA) indices
+ * corresponds with register values
+ */
+static const int da9213_current_limits[] = {
+	3000000, 3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000,
+	4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000
+};
 
 static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev)
 {
@@ -129,12 +144,26 @@ static int da9211_set_current_limit(struct regulator_dev *rdev, int min,
 {
 	int id = rdev_get_id(rdev);
 	struct da9211 *chip = rdev_get_drvdata(rdev);
-	int i;
+	int i, max_size;
+	const int *current_limits;
+
+	switch (chip->chip_id) {
+	case DA9211:
+		current_limits = da9211_current_limits;
+		max_size = ARRAY_SIZE(da9211_current_limits)-1;
+		break;
+	case DA9213:
+		current_limits = da9213_current_limits;
+		max_size = ARRAY_SIZE(da9213_current_limits)-1;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	/* search for closest to maximum */
-	for (i = ARRAY_SIZE(da9211_current_limits)-1; i >= 0; i--) {
-		if (min <= da9211_current_limits[i] &&
-		    max >= da9211_current_limits[i]) {
+	for (i = max_size; i >= 0; i--) {
+		if (min <= current_limits[i] &&
+		    max >= current_limits[i]) {
 				return regmap_update_bits(chip->regmap,
 					DA9211_REG_BUCK_ILIM,
 					(0x0F << id*4), (i << id*4));
@@ -150,14 +179,28 @@ static int da9211_get_current_limit(struct regulator_dev *rdev)
 	struct da9211 *chip = rdev_get_drvdata(rdev);
 	unsigned int data;
 	int ret;
+	const int *current_limits;
+
+	switch (chip->chip_id) {
+	case DA9211:
+		current_limits = da9211_current_limits;
+		break;
+	case DA9213:
+		current_limits = da9213_current_limits;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	ret = regmap_read(chip->regmap, DA9211_REG_BUCK_ILIM, &data);
 	if (ret < 0)
 		return ret;
 
-	/* select one of 16 values: 0000 (2000mA) to 1111 (5000mA) */
+	/* select one of 16 values: 0000 (2000mA or 3000mA)
+	 * to 1111 (5000mA or 6000mA).
+	 */
 	data = (data >> id*4) & 0x0F;
-	return da9211_current_limits[data];
+	return current_limits[data];
 }
 
 static struct regulator_ops da9211_buck_ops = {
@@ -194,6 +237,59 @@ static struct regulator_desc da9211_regulators[] = {
 	DA9211_BUCK(BUCKB),
 };
 
+#ifdef CONFIG_OF
+static struct of_regulator_match da9211_matches[] = {
+	[DA9211_ID_BUCKA] = { .name = "BUCKA" },
+	[DA9211_ID_BUCKB] = { .name = "BUCKB" },
+	};
+
+static struct da9211_pdata *da9211_parse_regulators_dt(
+		struct device *dev)
+{
+	struct da9211_pdata *pdata;
+	struct device_node *node;
+	int i, num, n;
+
+	node = of_get_child_by_name(dev->of_node, "regulators");
+	if (!node) {
+		dev_err(dev, "regulators node not found\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	num = of_regulator_match(dev, node, da9211_matches,
+				 ARRAY_SIZE(da9211_matches));
+	of_node_put(node);
+	if (num < 0) {
+		dev_err(dev, "Failed to match regulators\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->num_buck = num;
+
+	n = 0;
+	for (i = 0; i < ARRAY_SIZE(da9211_matches); i++) {
+		if (!da9211_matches[i].init_data)
+			continue;
+
+		pdata->init_data[n] = da9211_matches[i].init_data;
+
+		n++;
+	}
+
+	return pdata;
+}
+#else
+static struct da9211_pdata *da9211_parse_regulators_dt(
+		struct device *dev)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
+
 static irqreturn_t da9211_irq_handler(int irq, void *data)
 {
 	struct da9211 *chip = data;
@@ -264,13 +360,11 @@ static int da9211_regulator_init(struct da9211 *chip)
 	}
 
 	for (i = 0; i < chip->num_regulator; i++) {
-		if (chip->pdata)
-			config.init_data =
-				&(chip->pdata->init_data[i]);
-
+		config.init_data = chip->pdata->init_data[i];
 		config.dev = chip->dev;
 		config.driver_data = chip;
 		config.regmap = chip->regmap;
+		config.of_node = chip->dev->of_node;
 
 		chip->rdev[i] = devm_regulator_register(chip->dev,
 			&da9211_regulators[i], &config);
@@ -293,6 +387,7 @@ static int da9211_regulator_init(struct da9211 *chip)
 
 	return 0;
 }
+
 /*
  * I2C driver interface functions
  */
@@ -301,14 +396,17 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
 {
 	struct da9211 *chip;
 	int error, ret;
+	unsigned int data;
 
 	chip = devm_kzalloc(&i2c->dev, sizeof(struct da9211), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
 
 	chip->dev = &i2c->dev;
 	chip->regmap = devm_regmap_init_i2c(i2c, &da9211_regmap_config);
 	if (IS_ERR(chip->regmap)) {
 		error = PTR_ERR(chip->regmap);
-		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+		dev_err(chip->dev, "Failed to allocate register map: %d\n",
 			error);
 		return error;
 	}
@@ -316,11 +414,33 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
 	i2c_set_clientdata(i2c, chip);
 
 	chip->pdata = i2c->dev.platform_data;
-	if (!chip->pdata) {
-		dev_err(&i2c->dev, "No platform init data supplied\n");
+
+	ret = regmap_read(chip->regmap, DA9211_REG_DEVICE_ID, &data);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to read DEVICE_ID reg: %d\n", ret);
+		return ret;
+	}
+
+	switch (data) {
+	case DA9211_DEVICE_ID:
+		chip->chip_id = DA9211;
+		break;
+	case DA9213_DEVICE_ID:
+		chip->chip_id = DA9213;
+		break;
+	default:
+		dev_err(chip->dev, "Unsupported device id = 0x%x.\n", data);
 		return -ENODEV;
 	}
 
+	if (!chip->pdata)
+		chip->pdata = da9211_parse_regulators_dt(chip->dev);
+
+	if (IS_ERR(chip->pdata)) {
+		dev_err(chip->dev, "No regulators defined for the platform\n");
+		return PTR_ERR(chip->pdata);
+	}
+
 	chip->chip_irq = i2c->irq;
 
 	if (chip->chip_irq != 0) {
@@ -340,22 +460,32 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
 	ret = da9211_regulator_init(chip);
 
 	if (ret < 0)
-		dev_err(&i2c->dev, "Failed to initialize regulator: %d\n", ret);
+		dev_err(chip->dev, "Failed to initialize regulator: %d\n", ret);
 
 	return ret;
 }
 
 static const struct i2c_device_id da9211_i2c_id[] = {
-	{"da9211", 0},
+	{"da9211", DA9211},
+	{"da9213", DA9213},
 	{},
 };
-
 MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id da9211_dt_ids[] = {
+	{ .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
+	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] },
+	{},
+};
+MODULE_DEVICE_TABLE(of, da9211_dt_ids);
+#endif
+
 static struct i2c_driver da9211_regulator_driver = {
 	.driver = {
 		.name = "da9211",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(da9211_dt_ids),
 	},
 	.probe = da9211_i2c_probe,
 	.id_table = da9211_i2c_id,
@@ -364,5 +494,5 @@ static struct i2c_driver da9211_regulator_driver = {
 module_i2c_driver(da9211_regulator_driver);
 
 MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
-MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211");
+MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213");
 MODULE_LICENSE("GPL v2");

drivers/regulator/da9211-regulator.h

 /*
- * da9211-regulator.h - Regulator definitions for DA9211
+ * da9211-regulator.h - Regulator definitions for DA9211/DA9213
  * Copyright (C) 2014  Dialog Semiconductor Ltd.
  *
  * This library is free software; you can redistribute it and/or
@@ -53,12 +53,15 @@
 /* BUCK Phase Selection*/
 #define DA9211_REG_CONFIG_E			0x147
 
+/* Device ID */
+#define	DA9211_REG_DEVICE_ID			0x201
+
 /*
  * Registers bits
  */
 /* DA9211_REG_PAGE_CON (addr=0x00) */
 #define	DA9211_REG_PAGE_SHIFT			1
-#define	DA9211_REG_PAGE_MASK			0x02
+#define	DA9211_REG_PAGE_MASK			0x06
 /* On I2C registers 0x00 - 0xFF */
 #define	DA9211_REG_PAGE0			0
 /* On I2C registers 0x100 - 0x1FF */

include/linux/regulator/da9211.h

 /*
- * da9211.h - Regulator device driver for DA9211
+ * da9211.h - Regulator device driver for DA9211/DA9213
  * Copyright (C) 2014  Dialog Semiconductor Ltd.
  *
  * This library is free software; you can redistribute it and/or
@@ -20,6 +20,11 @@
 
 #define DA9211_MAX_REGULATORS	2
 
+enum da9211_chip_id {
+	DA9211,
+	DA9213,
+};
+
 struct da9211_pdata {
 	/*
 	 * Number of buck
@@ -27,6 +32,6 @@ struct da9211_pdata {
 	 * 2 : 2 phase 2 buck
 	 */
 	int num_buck;
-	struct regulator_init_data *init_data;
+	struct regulator_init_data *init_data[DA9211_MAX_REGULATORS];
 };
 #endif