Commit 95691e3e authored by Maciej S. Szmigiero's avatar Maciej S. Szmigiero Committed by Dominik Brodowski

pcmcia: Implement CLKRUN protocol disabling for Ricoh bridges

Currently, "disable_clkrun" yenta_socket module parameter is only
implemented for TI CardBus bridges.
Add also an implementation for Ricoh bridges that have the necessary
setting documented in publicly available datasheets.

Tested on a RL5C476II with a Sunrich C-160 CardBus NIC that doesn't work
correctly unless the CLKRUN protocol is disabled.

Let's also make it clear in its description that the "disable_clkrun"
module parameter only works on these two previously mentioned brands of
CardBus bridges.
Signed-off-by: default avatarMaciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarDominik Brodowski <linux@dominikbrodowski.net>
parent 1b22dcf6
......@@ -119,6 +119,10 @@
#define RL5C4XX_MISC_CONTROL 0x2F /* 8 bit */
#define RL5C4XX_ZV_ENABLE 0x08
/* Misc Control 3 Register */
#define RL5C4XX_MISC3 0x00A2 /* 16 bit */
#define RL5C47X_MISC3_CB_CLKRUN_DIS BIT(1)
#ifdef __YENTA_H
#define rl_misc(socket) ((socket)->private[0])
......@@ -156,6 +160,35 @@ static void ricoh_set_zv(struct yenta_socket *socket)
}
}
static void ricoh_set_clkrun(struct yenta_socket *socket, bool quiet)
{
u16 misc3;
/*
* RL5C475II likely has this setting, too, however no datasheet
* is publicly available for this chip
*/
if (socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C476 &&
socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C478)
return;
if (socket->dev->revision < 0x80)
return;
misc3 = config_readw(socket, RL5C4XX_MISC3);
if (misc3 & RL5C47X_MISC3_CB_CLKRUN_DIS) {
if (!quiet)
dev_dbg(&socket->dev->dev,
"CLKRUN feature already disabled\n");
} else if (disable_clkrun) {
if (!quiet)
dev_info(&socket->dev->dev,
"Disabling CLKRUN feature\n");
misc3 |= RL5C47X_MISC3_CB_CLKRUN_DIS;
config_writew(socket, RL5C4XX_MISC3, misc3);
}
}
static void ricoh_save_state(struct yenta_socket *socket)
{
rl_misc(socket) = config_readw(socket, RL5C4XX_MISC);
......@@ -172,6 +205,7 @@ static void ricoh_restore_state(struct yenta_socket *socket)
config_writew(socket, RL5C4XX_16BIT_IO_0, rl_io(socket));
config_writew(socket, RL5C4XX_16BIT_MEM_0, rl_mem(socket));
config_writew(socket, RL5C4XX_CONFIG, rl_config(socket));
ricoh_set_clkrun(socket, true);
}
......@@ -197,6 +231,7 @@ static int ricoh_override(struct yenta_socket *socket)
config_writew(socket, RL5C4XX_CONFIG, config);
ricoh_set_zv(socket);
ricoh_set_clkrun(socket, false);
return 0;
}
......
......@@ -26,7 +26,8 @@
static bool disable_clkrun;
module_param(disable_clkrun, bool, 0444);
MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option");
MODULE_PARM_DESC(disable_clkrun,
"If PC card doesn't function properly, please try this option (TI and Ricoh bridges only)");
static bool isa_probe = 1;
module_param(isa_probe, bool, 0444);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment