nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery

nvme_fc_error_recovery() special cases handling when in CONNECTING state
and calls __nvme_fc_terminate_io(). __nvme_fc_terminate_io() itself
special cases CONNECTING state and calls the routine to abort outstanding
ios.

Simplify the sequence by putting the call to abort outstanding I/Os
directly in nvme_fc_error_recovery.

Move the location of __nvme_fc_abort_outstanding_ios(), and
nvme_fc_terminate_exchange() which is called by it, to avoid adding
function prototypes for nvme_fc_error_recovery().
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

drivers/nvme/host/fc.c

@@ -2413,27 +2413,97 @@ nvme_fc_nvme_ctrl_freed(struct nvme_ctrl *nctrl)
 	nvme_fc_ctrl_put(ctrl);
 }
 
-static void __nvme_fc_terminate_io(struct nvme_fc_ctrl *ctrl);
+/*
+ * This routine is used by the transport when it needs to find active
+ * io on a queue that is to be terminated. The transport uses
+ * blk_mq_tagset_busy_itr() to find the busy requests, which then invoke
+ * this routine to kill them on a 1 by 1 basis.
+ *
+ * As FC allocates FC exchange for each io, the transport must contact
+ * the LLDD to terminate the exchange, thus releasing the FC exchange.
+ * After terminating the exchange the LLDD will call the transport's
+ * normal io done path for the request, but it will have an aborted
+ * status. The done path will return the io request back to the block
+ * layer with an error status.
+ */
+static bool
+nvme_fc_terminate_exchange(struct request *req, void *data, bool reserved)
+{
+	struct nvme_ctrl *nctrl = data;
+	struct nvme_fc_ctrl *ctrl = to_fc_ctrl(nctrl);
+	struct nvme_fc_fcp_op *op = blk_mq_rq_to_pdu(req);
+
+	__nvme_fc_abort_op(ctrl, op);
+	return true;
+}
 
+/*
+ * This routine runs through all outstanding commands on the association
+ * and aborts them.  This routine is typically be called by the
+ * delete_association routine. It is also called due to an error during
+ * reconnect. In that scenario, it is most likely a command that initializes
+ * the controller, including fabric Connect commands on io queues, that
+ * may have timed out or failed thus the io must be killed for the connect
+ * thread to see the error.
+ */
 static void
-nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg)
+__nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues)
 {
 	/*
-	 * if an error (io timeout, etc) while (re)connecting,
-	 * it's an error on creating the new association.
-	 * Start the error recovery thread if it hasn't already
-	 * been started. It is expected there could be multiple
-	 * ios hitting this path before things are cleaned up.
+	 * If io queues are present, stop them and terminate all outstanding
+	 * ios on them. As FC allocates FC exchange for each io, the
+	 * transport must contact the LLDD to terminate the exchange,
+	 * thus releasing the FC exchange. We use blk_mq_tagset_busy_itr()
+	 * to tell us what io's are busy and invoke a transport routine
+	 * to kill them with the LLDD.  After terminating the exchange
+	 * the LLDD will call the transport's normal io done path, but it
+	 * will have an aborted status. The done path will return the
+	 * io requests back to the block layer as part of normal completions
+	 * (but with error status).
+	 */
+	if (ctrl->ctrl.queue_count > 1) {
+		nvme_stop_queues(&ctrl->ctrl);
+		blk_mq_tagset_busy_iter(&ctrl->tag_set,
+				nvme_fc_terminate_exchange, &ctrl->ctrl);
+		blk_mq_tagset_wait_completed_request(&ctrl->tag_set);
+		if (start_queues)
+			nvme_start_queues(&ctrl->ctrl);
+	}
+
+	/*
+	 * Other transports, which don't have link-level contexts bound
+	 * to sqe's, would try to gracefully shutdown the controller by
+	 * writing the registers for shutdown and polling (call
+	 * nvme_shutdown_ctrl()). Given a bunch of i/o was potentially
+	 * just aborted and we will wait on those contexts, and given
+	 * there was no indication of how live the controlelr is on the
+	 * link, don't send more io to create more contexts for the
+	 * shutdown. Let the controller fail via keepalive failure if
+	 * its still present.
+	 */
+
+	/*
+	 * clean up the admin queue. Same thing as above.
 	 */
-	if (ctrl->ctrl.state == NVME_CTRL_CONNECTING) {
-		__nvme_fc_terminate_io(ctrl);
+	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
+	blk_mq_tagset_busy_iter(&ctrl->admin_tag_set,
+				nvme_fc_terminate_exchange, &ctrl->ctrl);
+	blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set);
+}
 
+static void
+nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg)
+{
 	/*
-		 * Rescheduling the connection after recovering
-		 * from the io error is left to the reconnect work
-		 * item, which is what should have stalled waiting on
-		 * the io that had the error that scheduled this work.
+	 * if an error (io timeout, etc) while (re)connecting, the remote
+	 * port requested terminating of the association (disconnect_ls)
+	 * or an error (timeout or abort) occurred on an io while creating
+	 * the controller.  Abort any ios on the association and let the
+	 * create_association error path resolve things.
 	 */
+	if (ctrl->ctrl.state == NVME_CTRL_CONNECTING) {
+		__nvme_fc_abort_outstanding_ios(ctrl, true);
+		set_bit(ASSOC_FAILED, &ctrl->flags);
 		return;
 	}
 
@@ -2747,30 +2817,6 @@ nvme_fc_complete_rq(struct request *rq)
 	nvme_fc_ctrl_put(ctrl);
 }
 
-/*
- * This routine is used by the transport when it needs to find active
- * io on a queue that is to be terminated. The transport uses
- * blk_mq_tagset_busy_itr() to find the busy requests, which then invoke
- * this routine to kill them on a 1 by 1 basis.
- *
- * As FC allocates FC exchange for each io, the transport must contact
- * the LLDD to terminate the exchange, thus releasing the FC exchange.
- * After terminating the exchange the LLDD will call the transport's
- * normal io done path for the request, but it will have an aborted
- * status. The done path will return the io request back to the block
- * layer with an error status.
- */
-static bool
-nvme_fc_terminate_exchange(struct request *req, void *data, bool reserved)
-{
-	struct nvme_ctrl *nctrl = data;
-	struct nvme_fc_ctrl *ctrl = to_fc_ctrl(nctrl);
-	struct nvme_fc_fcp_op *op = blk_mq_rq_to_pdu(req);
-
-	__nvme_fc_abort_op(ctrl, op);
-	return true;
-}
-
 
 static const struct blk_mq_ops nvme_fc_mq_ops = {
 	.queue_rq	= nvme_fc_queue_rq,
@@ -3111,60 +3157,6 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl)
 }
 
 
-/*
- * This routine runs through all outstanding commands on the association
- * and aborts them.  This routine is typically be called by the
- * delete_association routine. It is also called due to an error during
- * reconnect. In that scenario, it is most likely a command that initializes
- * the controller, including fabric Connect commands on io queues, that
- * may have timed out or failed thus the io must be killed for the connect
- * thread to see the error.
- */
-static void
-__nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues)
-{
-	/*
-	 * If io queues are present, stop them and terminate all outstanding
-	 * ios on them. As FC allocates FC exchange for each io, the
-	 * transport must contact the LLDD to terminate the exchange,
-	 * thus releasing the FC exchange. We use blk_mq_tagset_busy_itr()
-	 * to tell us what io's are busy and invoke a transport routine
-	 * to kill them with the LLDD.  After terminating the exchange
-	 * the LLDD will call the transport's normal io done path, but it
-	 * will have an aborted status. The done path will return the
-	 * io requests back to the block layer as part of normal completions
-	 * (but with error status).
-	 */
-	if (ctrl->ctrl.queue_count > 1) {
-		nvme_stop_queues(&ctrl->ctrl);
-		blk_mq_tagset_busy_iter(&ctrl->tag_set,
-				nvme_fc_terminate_exchange, &ctrl->ctrl);
-		blk_mq_tagset_wait_completed_request(&ctrl->tag_set);
-		if (start_queues)
-			nvme_start_queues(&ctrl->ctrl);
-	}
-
-	/*
-	 * Other transports, which don't have link-level contexts bound
-	 * to sqe's, would try to gracefully shutdown the controller by
-	 * writing the registers for shutdown and polling (call
-	 * nvme_shutdown_ctrl()). Given a bunch of i/o was potentially
-	 * just aborted and we will wait on those contexts, and given
-	 * there was no indication of how live the controlelr is on the
-	 * link, don't send more io to create more contexts for the
-	 * shutdown. Let the controller fail via keepalive failure if
-	 * its still present.
-	 */
-
-	/*
-	 * clean up the admin queue. Same thing as above.
-	 */
-	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
-	blk_mq_tagset_busy_iter(&ctrl->admin_tag_set,
-				nvme_fc_terminate_exchange, &ctrl->ctrl);
-	blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set);
-}
-
 /*
  * This routine stops operation of the controller on the host side.
  * On the host os stack side: Admin and IO queues are stopped,
@@ -3297,17 +3289,6 @@ nvme_fc_reconnect_or_delete(struct nvme_fc_ctrl *ctrl, int status)
 static void
 __nvme_fc_terminate_io(struct nvme_fc_ctrl *ctrl)
 {
-	/*
-	 * if state is CONNECTING - the error occurred as part of a
-	 * reconnect attempt. Abort any ios on the association and
-	 * let the create_association error paths resolve things.
-	 */
-	if (ctrl->ctrl.state == NVME_CTRL_CONNECTING) {
-		__nvme_fc_abort_outstanding_ios(ctrl, true);
-		set_bit(ASSOC_FAILED, &ctrl->flags);
-		return;
-	}
-
 	/*
 	 * For any other state, kill the association. As this routine
 	 * is a common io abort routine for resetting and such, after