Commit 95dafb2c authored by Joachim Eastwood's avatar Joachim Eastwood

ARM: dts: lpc4357-ea4357: add gpio joystick

Hook up the small joystick found on the EA4357 devkit.
Signed-off-by: default avatarJoachim Eastwood <manabian@gmail.com>
parent bfd0b498
...@@ -15,6 +15,9 @@ ...@@ -15,6 +15,9 @@
#include "lpc18xx.dtsi" #include "lpc18xx.dtsi"
#include "lpc4357.dtsi" #include "lpc4357.dtsi"
#include "dt-bindings/input/input.h"
#include "dt-bindings/gpio/gpio.h"
/ { / {
model = "Embedded Artists' LPC4357 Developer's Kit"; model = "Embedded Artists' LPC4357 Developer's Kit";
compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350"; compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
...@@ -42,9 +45,58 @@ vmmc: vmmc_fixed { ...@@ -42,9 +45,58 @@ vmmc: vmmc_fixed {
regulator-min-microvolt = <3300000>; regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
}; };
gpio_joystick {
compatible = "gpio-keys-polled";
pinctrl-names = "default";
pinctrl-0 = <&gpio_joystick_pins>;
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
autorepeat;
button@0 {
label = "joy_enter";
linux,code = <KEY_ENTER>;
gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
};
button@1 {
label = "joy_left";
linux,code = <KEY_LEFT>;
gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
};
button@2 {
label = "joy_up";
linux,code = <KEY_UP>;
gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
};
button@3 {
label = "joy_right";
linux,code = <KEY_RIGHT>;
gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
};
button@4 {
label = "joy_down";
linux,code = <KEY_DOWN>;
gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
};
};
}; };
&pinctrl { &pinctrl {
gpio_joystick_pins: gpio-joystick-pins {
gpio_joystick_cfg {
pins = "p9_0", "p9_1", "pa_1", "pa_2", "pa_3";
function = "gpio";
input-enable;
bias-disable;
};
};
sdmmc_pins: sdmmc-pins { sdmmc_pins: sdmmc-pins {
sdmmc_clk_cfg { sdmmc_clk_cfg {
pins = "pc_0"; pins = "pc_0";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment