Commit 95dcb997 authored by Dang Huynh's avatar Dang Huynh Committed by Bjorn Andersson

arm64: dts: qcom: Drop input-name property

This property doesn't seem to exist in the documentation nor
in source code, but for some reason it is defined in a bunch
of device trees.
Signed-off-by: default avatarDang Huynh <danct12@riseup.net>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211123162436.1507341-1-danct12@riseup.net
parent 68674303
...@@ -42,7 +42,6 @@ framebuffer0: framebuffer@3404000 { ...@@ -42,7 +42,6 @@ framebuffer0: framebuffer@3404000 {
gpio_keys { gpio_keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
input-name = "gpio-keys";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
autorepeat; autorepeat;
......
...@@ -62,7 +62,6 @@ divclk4: divclk4 { ...@@ -62,7 +62,6 @@ divclk4: divclk4 {
gpio-keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
input-name = "gpio-keys";
autorepeat; autorepeat;
volupkey { volupkey {
......
...@@ -29,7 +29,6 @@ / { ...@@ -29,7 +29,6 @@ / {
gpio_keys { gpio_keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
input-name = "gpio-keys";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
autorepeat; autorepeat;
......
...@@ -29,7 +29,6 @@ extcon_usb: extcon-usb { ...@@ -29,7 +29,6 @@ extcon_usb: extcon-usb {
gpio-hall-sensors { gpio-hall-sensors {
compatible = "gpio-keys"; compatible = "gpio-keys";
input-name = "hall-sensors";
label = "Hall sensors"; label = "Hall sensors";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&hall_sensor1_default>; pinctrl-0 = <&hall_sensor1_default>;
...@@ -46,7 +45,6 @@ hall-sensor1 { ...@@ -46,7 +45,6 @@ hall-sensor1 {
gpio-kb-extra-keys { gpio-kb-extra-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
input-name = "extra-kb-keys";
label = "Keyboard extra keys"; label = "Keyboard extra keys";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&gpio_kb_pins_extra>; pinctrl-0 = <&gpio_kb_pins_extra>;
...@@ -102,7 +100,6 @@ alt { ...@@ -102,7 +100,6 @@ alt {
gpio-keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
input-name = "side-buttons";
label = "Side buttons"; label = "Side buttons";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -93,7 +93,6 @@ vph_pwr: vph-pwr-regulator { ...@@ -93,7 +93,6 @@ vph_pwr: vph-pwr-regulator {
gpio-keys { gpio-keys {
compatible = "gpio-keys"; compatible = "gpio-keys";
input-name = "gpio-keys";
label = "Side buttons"; label = "Side buttons";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
...@@ -126,7 +125,6 @@ camera-focus { ...@@ -126,7 +125,6 @@ camera-focus {
gpio-hall-sensor { gpio-hall-sensor {
compatible = "gpio-keys"; compatible = "gpio-keys";
input-name = "hall-sensors";
label = "Hall sensors"; label = "Hall sensors";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&hall_sensor0_default>; pinctrl-0 = <&hall_sensor0_default>;
......
...@@ -90,7 +90,6 @@ cam_vana_rear_vreg: cam_vana_rear_vreg { ...@@ -90,7 +90,6 @@ cam_vana_rear_vreg: cam_vana_rear_vreg {
gpio_keys { gpio_keys {
status = "okay"; status = "okay";
compatible = "gpio-keys"; compatible = "gpio-keys";
input-name = "gpio-keys";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
......
...@@ -42,7 +42,6 @@ extcon_usb: extcon-usb { ...@@ -42,7 +42,6 @@ extcon_usb: extcon-usb {
gpio-keys { gpio-keys {
status = "okay"; status = "okay";
compatible = "gpio-keys"; compatible = "gpio-keys";
input-name = "gpio-keys";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
autorepeat; autorepeat;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment