Commit 95e82747 authored by Paul Bolle's avatar Paul Bolle Committed by Greg Ungerer

m68k: drop unused Kconfig symbols

Signed-off-by: default avatarPaul Bolle <pebolle@tiscali.nl>
Acked-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
parent 7a79a80f
...@@ -77,32 +77,6 @@ config MULTIFACE_III_TTY ...@@ -77,32 +77,6 @@ config MULTIFACE_III_TTY
To compile this driver as a module, choose M here. To compile this driver as a module, choose M here.
config GVPIOEXT
tristate "GVP IO-Extender support"
depends on PARPORT=n && ZORRO
help
If you want to use a GVP IO-Extender serial card in Linux, say Y.
Otherwise, say N.
config GVPIOEXT_LP
tristate "GVP IO-Extender parallel printer support"
depends on GVPIOEXT
help
Say Y to enable driving a printer from the parallel port on your
GVP IO-Extender card, N otherwise.
config GVPIOEXT_PLIP
tristate "GVP IO-Extender PLIP support"
depends on GVPIOEXT
help
Say Y to enable doing IP over the parallel port on your GVP
IO-Extender card, N otherwise.
config MAC_HID
bool
depends on INPUT_ADBHID
default y
config HPDCA config HPDCA
tristate "HP DCA serial support" tristate "HP DCA serial support"
depends on DIO && SERIAL_8250 depends on DIO && SERIAL_8250
...@@ -145,7 +119,7 @@ config DN_SERIAL ...@@ -145,7 +119,7 @@ config DN_SERIAL
config SERIAL_CONSOLE config SERIAL_CONSOLE
bool "Support for serial port console" bool "Support for serial port console"
depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL) depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
---help--- ---help---
If you say Y here, it will be possible to use a serial port as the If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all system console (the system console is the device which receives all
......
...@@ -303,9 +303,6 @@ config COBRA5282 ...@@ -303,9 +303,6 @@ config COBRA5282
help help
Support for the senTec COBRA5282 board. Support for the senTec COBRA5282 board.
config EMAC_INC
bool
config SOM5282EM config SOM5282EM
bool "EMAC.Inc SOM5282EM board support" bool "EMAC.Inc SOM5282EM board support"
depends on M528x depends on M528x
...@@ -371,27 +368,21 @@ config FIREBEE ...@@ -371,27 +368,21 @@ config FIREBEE
help help
Support for the FireBee ColdFire 5475 based board. Support for the FireBee ColdFire 5475 based board.
config HW_FEITH
bool
config CLEOPATRA config CLEOPATRA
bool "Feith CLEOPATRA board support" bool "Feith CLEOPATRA board support"
depends on (M5307 || M5407) depends on (M5307 || M5407)
select HW_FEITH
help help
Support for the Feith Cleopatra boards. Support for the Feith Cleopatra boards.
config CANCam config CANCam
bool "Feith CANCam board support" bool "Feith CANCam board support"
depends on M5272 depends on M5272
select HW_FEITH
help help
Support for the Feith CANCam board. Support for the Feith CANCam board.
config SCALES config SCALES
bool "Feith SCALES board support" bool "Feith SCALES board support"
depends on M5272 depends on M5272
select HW_FEITH
help help
Support for the Feith SCALES board. Support for the Feith SCALES board.
...@@ -438,13 +429,6 @@ if !MMU || COLDFIRE ...@@ -438,13 +429,6 @@ if !MMU || COLDFIRE
comment "Machine Options" comment "Machine Options"
config ROMFS_FROM_ROM
bool "ROMFS image not RAM resident"
depends on (NETtel || SNAPGEAR)
help
The ROMfs filesystem will stay resident in the FLASH/ROM, not be
moved into RAM.
config UBOOT config UBOOT
bool "Support for U-Boot command line parameters" bool "Support for U-Boot command line parameters"
help help
...@@ -524,33 +508,6 @@ config KERNELBASE ...@@ -524,33 +508,6 @@ config KERNELBASE
a system with the RAM based at address 0, and leaving enough room a system with the RAM based at address 0, and leaving enough room
for the theoretical maximum number of 256 vectors. for the theoretical maximum number of 256 vectors.
choice
prompt "RAM bus width"
default RAMAUTOBIT
config RAMAUTOBIT
bool "AUTO"
help
Select the physical RAM data bus size. Not needed on most platforms,
so you can generally choose AUTO.
config RAM8BIT
bool "8bit"
help
Configure RAM bus to be 8 bits wide.
config RAM16BIT
bool "16bit"
help
Configure RAM bus to be 16 bits wide.
config RAM32BIT
bool "32bit"
help
Configure RAM bus to be 32 bits wide.
endchoice
comment "ROM configuration" comment "ROM configuration"
config ROM config ROM
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment