Merge tag 'amd-drm-fixes-5.17-2022-02-09' of...

Merge tag 'amd-drm-fixes-5.17-2022-02-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.17-2022-02-09:

amdgpu:
- DCN 3.1 display fixes
- GC 10.3.1 harvest fix
- Page flip irq fix
- hwmon label fix
- DCN 2.0 display fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210041137.5926-1-alexander.deucher@amd.com

drivers/gpu/drm/amd/amdgpu/gfxhub_v2_1.c

@@ -543,7 +543,9 @@ static void gfxhub_v2_1_utcl2_harvest(struct amdgpu_device *adev)
 		adev->gfx.config.max_sh_per_se *
 		adev->gfx.config.max_shader_engines);
 
-	if (adev->ip_versions[GC_HWIP][0] == IP_VERSION(10, 3, 3)) {
+	switch (adev->ip_versions[GC_HWIP][0]) {
+	case IP_VERSION(10, 3, 1):
+	case IP_VERSION(10, 3, 3):
 		/* Get SA disabled bitmap from eFuse setting */
 		efuse_setting = RREG32_SOC15(GC, 0, mmCC_GC_SA_UNIT_DISABLE);
 		efuse_setting &= CC_GC_SA_UNIT_DISABLE__SA_DISABLE_MASK;
@@ -566,6 +568,9 @@ static void gfxhub_v2_1_utcl2_harvest(struct amdgpu_device *adev)
 		disabled_sa = tmp;
 
 		WREG32_SOC15(GC, 0, mmGCUTCL2_HARVEST_BYPASS_GROUPS_YELLOW_CARP, disabled_sa);
+		break;
+	default:
+		break;
 	}
 }
 

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c

@@ -3653,7 +3653,7 @@ static int dcn10_register_irq_handlers(struct amdgpu_device *adev)
 
 	/* Use GRPH_PFLIP interrupt */
 	for (i = DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT;
-			i <= DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT + adev->mode_info.num_crtc - 1;
+			i <= DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT + dc->caps.max_otg_num - 1;
 			i++) {
 		r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, i, &adev->pageflip_irq);
 		if (r) {

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c

@@ -120,6 +120,10 @@ static int dcn31_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr,
 	result = dcn31_smu_wait_for_response(clk_mgr, 10, 200000);
 
 	if (result == VBIOSSMC_Result_Failed) {
+		if (msg_id == VBIOSSMC_MSG_TransferTableDram2Smu &&
+		    param == TABLE_WATERMARKS)
+			DC_LOG_WARNING("Watermarks table not configured properly by SMU");
+		else
 			ASSERT(0);
 		REG_WRITE(MP1_SMN_C2PMSG_91, VBIOSSMC_Result_OK);
 		return -1;

drivers/gpu/drm/amd/display/dc/core/dc.c

@@ -1220,6 +1220,8 @@ struct dc *dc_create(const struct dc_init_data *init_params)
 
 		dc->caps.max_dp_protocol_version = DP_VERSION_1_4;
 
+		dc->caps.max_otg_num = dc->res_pool->res_cap->num_timing_generator;
+
 		if (dc->res_pool->dmcu != NULL)
 			dc->versions.dmcu_version = dc->res_pool->dmcu->dmcu_version;
 	}

drivers/gpu/drm/amd/display/dc/dc.h

@@ -202,6 +202,7 @@ struct dc_caps {
 	bool edp_dsc_support;
 	bool vbios_lttpr_aware;
 	bool vbios_lttpr_enable;
+	uint32_t max_otg_num;
 };
 
 struct dc_bug_wa {

drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c

@@ -1834,9 +1834,29 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context)
 				break;
 			}
 		}
-		// We are trying to enable eDP, don't power down VDD
-		if (can_apply_edp_fast_boot)
+
+		/*
+		 * TO-DO: So far the code logic below only addresses single eDP case.
+		 * For dual eDP case, there are a few things that need to be
+		 * implemented first:
+		 *
+		 * 1. Change the fastboot logic above, so eDP link[0 or 1]'s
+		 * stream[0 or 1] will all be checked.
+		 *
+		 * 2. Change keep_edp_vdd_on to an array, and maintain keep_edp_vdd_on
+		 * for each eDP.
+		 *
+		 * Once above 2 things are completed, we can then change the logic below
+		 * correspondingly, so dual eDP case will be fully covered.
+		 */
+
+		// We are trying to enable eDP, don't power down VDD if eDP stream is existing
+		if ((edp_stream_num == 1 && edp_streams[0] != NULL) || can_apply_edp_fast_boot) {
 			keep_edp_vdd_on = true;
+			DC_LOG_EVENT_LINK_TRAINING("Keep eDP Vdd on\n");
+		} else {
+			DC_LOG_EVENT_LINK_TRAINING("No eDP stream enabled, turn eDP Vdd off\n");
+		}
 	}
 
 	// Check seamless boot support

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c

@@ -1069,7 +1069,7 @@ static const struct dc_debug_options debug_defaults_drv = {
 		.timing_trace = false,
 		.clock_trace = true,
 		.disable_pplib_clock_request = true,
-		.pipe_split_policy = MPC_SPLIT_DYNAMIC,
+		.pipe_split_policy = MPC_SPLIT_AVOID_MULT_DISP,
 		.force_single_disp_pipe_split = false,
 		.disable_dcc = DCC_ENABLE,
 		.vsr_support = true,

drivers/gpu/drm/amd/pm/amdgpu_pm.c

@@ -3462,8 +3462,7 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj,
 	     attr == &sensor_dev_attr_power2_cap_min.dev_attr.attr ||
 		 attr == &sensor_dev_attr_power2_cap.dev_attr.attr ||
 		 attr == &sensor_dev_attr_power2_cap_default.dev_attr.attr ||
-		 attr == &sensor_dev_attr_power2_label.dev_attr.attr ||
-		 attr == &sensor_dev_attr_power1_label.dev_attr.attr))
+		 attr == &sensor_dev_attr_power2_label.dev_attr.attr))
 		return 0;
 
 	return effective_mode;