ARM: dts: sunxi: Add mdio bus sub-node to GMAC

The DWMAC binding never supported having the Ethernet PHY node as a
direct child to the controller, nor did it support the "phy" property
as a way to specify which Ethernet PHY to use. What seemed to work
was simply the implementation ignoring the "phy" property and instead
probing all addresses on the MDIO bus and using the first available
one.

The recent switch from "phy" to "phy-handle" breaks the assumptions
of the implementation, and does not match what the binding requires.
The binding requires that if an MDIO bus is described, it shall be
a sub-node with the "snps,dwmac-mdio" compatible string.

Add a device node for the MDIO bus, and move the Ethernet PHY node
under it. Also fix up the #address-cells and #size-cells properties
where needed.

Fixes: de332de2 ("ARM: dts: sunxi: Switch from phy to phy-handle")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

arch/arm/boot/dts/sun6i-a31-colombus.dts

@@ -79,10 +79,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -104,6 +100,12 @@ mma8452: mma8452@1d {
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31-hummingbird.dts

@@ -156,13 +156,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10000>;
-		reset-deassert-us = <30000>;
-	};
 };
 
 &hdmi {
@@ -199,6 +192,15 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31-i7.dts

@@ -120,10 +120,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -142,6 +138,12 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31-m9.dts

@@ -88,10 +88,6 @@ &gmac {
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
@@ -100,6 +96,12 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts

@@ -88,10 +88,6 @@ &gmac {
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
@@ -100,6 +96,12 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -939,9 +939,13 @@ gmac: ethernet@1c30000 {
 			snps,fixed-burst;
 			snps,force_sf_dma_mode;
 			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+		};
 
 		crypto: crypto-engine@1c15000 {
 			compatible = "allwinner,sun6i-a31-crypto",

arch/arm/boot/dts/sun6i-a31s-cs908.dts

@@ -70,9 +70,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &ir {
@@ -81,6 +78,12 @@ &ir {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &ohci1 {
 	status = "okay";
 };

arch/arm/boot/dts/sun6i-a31s-sina31s.dts

@@ -119,10 +119,6 @@ &gmac {
 	phy-mode = "mii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -160,6 +156,12 @@ button-349 {
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;

arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts

@@ -96,7 +96,15 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_dldo1>;
 	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
 
+&mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
@@ -105,12 +113,6 @@ phy1: ethernet-phy@1 {
 	};
 };
 
-&ir {
-	pinctrl-names = "default";
-	pinctrl-0 = <&s_ir_rx_pin>;
-	status = "okay";
-};
-
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts

@@ -133,10 +133,6 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -171,6 +167,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-bananapi.dts

@@ -135,10 +135,6 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -171,6 +167,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-bananapro.dts

@@ -113,10 +113,6 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -143,6 +139,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-cubieboard2.dts

@@ -118,10 +118,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -161,6 +157,12 @@ &mmc0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &ohci0 {
 	status = "okay";
 };

arch/arm/boot/dts/sun7i-a20-cubietruck.dts

@@ -153,10 +153,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -194,6 +190,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-hummingbird.dts

@@ -104,14 +104,6 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_vdd>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
-		reset-assert-us = <10000>;
-		/* wait 1s after reset, otherwise fail to read phy id */
-		reset-deassert-us = <1000000>;
-	};
 };
 
 &i2c0 {
@@ -145,6 +137,16 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts

@@ -119,10 +119,6 @@ &gmac {
 	phy-mode = "mii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -145,6 +141,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-icnova-swac.dts

@@ -79,10 +79,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -99,6 +95,12 @@ &i2c1 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-itead-ibox.dts

@@ -100,7 +100,9 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
+};
 
+&gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};

arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts

@@ -123,8 +123,6 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-	/delete-property/#address-cells;
-	/delete-property/#size-cells;
 
 	fixed-link {
 		speed = <1000>;

arch/arm/boot/dts/sun7i-a20-m3.dts

@@ -85,10 +85,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -111,6 +107,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts

@@ -114,10 +114,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -202,6 +198,12 @@ button-1400 {
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts

@@ -109,14 +109,6 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_vcc3v3>;
 	status = "okay";
-
-	phy3: ethernet-phy@3 {
-		reg = <3>;
-		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
-		reset-assert-us = <10000>;
-		/* wait 1s after reset, otherwise fail to read phy id */
-		reset-deassert-us = <1000000>;
-	};
 };
 
 &hdmi {
@@ -161,6 +153,16 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts

@@ -109,10 +109,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -149,6 +145,12 @@ eeprom: eeprom@50 {
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts

@@ -114,10 +114,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -154,6 +150,12 @@ &lradc {
 	vref-supply = <&reg_vcc3v0>;
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts

@@ -121,10 +121,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -215,6 +211,12 @@ button-1398 {
 	};
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts

@@ -124,10 +124,6 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -158,6 +154,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-orangepi.dts

@@ -100,10 +100,6 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -124,6 +120,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts

@@ -117,10 +117,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -149,6 +145,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-pcduino3.dts

@@ -125,10 +125,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -149,6 +145,12 @@ &ir0 {
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts

@@ -84,10 +84,6 @@ &gmac {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c0 {
@@ -110,6 +106,12 @@ &i2c2 {
 
 #include "axp209.dtsi"
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -1437,9 +1437,13 @@ gmac: ethernet@1c50000 {
 			snps,fixed-burst;
 			snps,force_sf_dma_mode;
 			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+		};
 
 		hstimer@1c60000 {
 			compatible = "allwinner,sun7i-a20-hstimer";

arch/arm/boot/dts/sun9i-a80-cubieboard4.dts

@@ -132,10 +132,6 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_cldo1>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &i2c3 {
@@ -144,6 +140,12 @@ &i2c3 {
 	status = "okay";
 };
 
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;

arch/arm/boot/dts/sun9i-a80-optimus.dts

@@ -127,7 +127,9 @@ &gmac {
 	phy-mode = "rgmii";
 	phy-supply = <&reg_cldo1>;
 	status = "okay";
+};
 
+&mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};

arch/arm/boot/dts/sun9i-a80.dtsi

@@ -331,9 +331,13 @@ gmac: ethernet@830000 {
 			snps,fixed-burst;
 			snps,force_sf_dma_mode;
 			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+		};
 
 		ehci0: usb@a00000 {
 			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";