Merge flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5

into flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-rmk

arch/arm/Config.help

@@ -836,3 +836,153 @@ CONFIG_DEBUG_BUGVERBOSE
   of the BUG call as well as the EIP and oops trace.  This aids
   debugging but costs about 70-100K of memory.
 
+CONFIG_ZBOOT_ROM
+  Say Y here if you intend to execute your compressed kernel image (zImage)
+  directly from ROM or flash.  If unsure, say N.
+
+CONFIG_ZBOOT_ROM_TEXT
+  The base address for zImage.  Unless you have special requirements, you
+  should not change this value.
+
+CONFIG_ZBOOT_ROM_BSS
+  The base address of 64KiB of read/write memory, which must be available
+  while the decompressor is running.  Unless you have special requirements,
+  you should not change this value.
+
+CONFIG_CPU_FREQ
+  CPU clock scaling allows you to change the clock speed of the
+  running CPU on the fly. This is a nice method to save battery power,
+  because the lower the clock speed, the less power the CPU
+  consumes. Note that this driver doesn't automatically change the CPU
+  clock speed, you need some userland tools (which still have to be
+  written) to implement the policy. If you don't understand what this
+  is all about, it's safe to say 'N'.
+
+CONFIG_ARCH_EDB7211
+  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
+  evaluation board.
+
+CONFIG_SA1100_H3100
+  Say Y here if you intend to run this kernel on the Compaq iPAQ
+  H3100 handheld computer.  Information about this machine and the
+  Linux port to this machine can be found at:
+
+  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
+  <http://www.compaq.com/products/handhelds/pocketpc/>
+
+CONFIG_SA1100_H3800
+  Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
+  series handheld computer.  Information about this machine and the
+  Linux port to this machine can be found at:
+
+  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
+  <http://www.compaq.com/products/handhelds/pocketpc/>
+
+CONFIG_H3600_SLEEVE
+  Choose this option to enable support for extension packs (sleeves)
+  for the Compaq iPAQ H3XXX series of handheld computers.  This option
+  is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension
+  packs.
+
+CONFIG_SA1100_GRAPHICSMASTER
+  Say Y here if you are using an Applied Data Systems Intel(R)
+  StrongARM(R) SA-1100 based Graphics Master SBC with SA-1111
+  StrongARM companion chip.  See
+  <http://www.applieddata.net/products_masterSpec.asp> for information
+  on this system.
+
+CONFIG_SA1100_ADSBITSY
+  Say Y here if you are using Applied Data Systems Intel(R)
+  StrongARM(R) 1110 based Bitsy, 3 x 5 inches in size, Compaq - IPAQ -
+  like platform. See
+  <http://www.applieddata.net/products_bitsySpec.asp> for more
+  information.
+
+CONFIG_SA1100_ITSY
+  Say Y here if you are using the Compaq Itsy experimental pocket
+  computer. See <http://research.compaq.com/wrl/projects/itsy/> for
+  more information.
+
+CONFIG_SA1100_HUW_WEBPANEL
+  Say Y here to support the HuW Webpanel produced by Hoeft & Wessel
+  AG.  English-language website is at
+  <http://www.hoeft-wessel.de/en.htm>; credits and build instructions
+  at Documentation/arm/SA1100/HUW_WEBPANEL.
+
+CONFIG_SA1100_PLEB
+  Say Y here if you are using a Portable Linux Embedded Board
+  (also known as PLEB). See <http://www.cse.unsw.edu.au/~pleb/>
+  for more information.
+
+CONFIG_SA1100_SHERMAN
+  Say Y here to support the Blazie Engineering `Sherman' StrongARM
+  1110-based SBC, used primarily in assistance products for the
+  visually impaired.  The company is now Freedom Scientific, with
+  a website at <http://www.freedomscientific.com/index.html>. The
+  Sherman product, however, appears to have been discontinued.
+
+CONFIG_SA1100_YOPY
+  Say Y here to support the Yopy PDA.  Product information at
+  <http://www.yopy.com/>.  See Documentation/arm/SA110/Yopy
+  for more.
+
+CONFIG_SA1100_CERF_CPLD
+  Say Y here to support the Linux CerfPDA development kit from
+  Intrinsyc. This is a StrongARM-1110-based reference platform for
+  designing custom PDAs.  Product info is at
+  <http://www.intrinsyc.com/products/referencedesigns/cerfpda.asp>.
+
+CONFIG_SA1100_FREEBIRD
+  Support the FreeBird board used in Coventive embedded products.  See
+  Documentation/arm/SA1100/Freebird for more.
+
+CONFIG_SA1100_PT_SYSTEM3
+   Say Y here if you intend to build a kernel suitable to run on
+   a Pruftechnik Digital Board. For more information see
+   <http://www.pruftechnik.com>
+
+CONFIG_CPU_ARM926T
+  This is a variant of the ARM920.  It has slightly different
+  instruction sequences for cache and TLB operations.  Curiously,
+  there is no documentation on it at the ARM corporate website.
+
+  Say Y if you want support for the ARM926T processor.
+  Otherwise, say N.
+
+CONFIG_SA1100_JORNADA720
+  Say Y here if you want to build a kernel for the HP Jornada 720
+  handheld computer.  See <http://www.hp.com/jornada/products/720>
+  for details.
+
+CONFIG_SA1100_OMNIMETER
+  Say Y here if you are using the inhand electronics OmniMeter.  See
+  <http://www.inhandelectronics.com/html/omni1.html> for details.
+
+CONFIG_SA1100_SIMPAD
+  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
+  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
+  FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
+  PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
+  like CL4 in additional it has a PCMCIA-Slot. For more information
+  visit <http://www.my-siemens.com or www.siemens.ch>.
+
+CONFIG_ARCH_CDB89712
+  This is an evaluation board from Cirrus for the CS89712 processor.
+  The board includes 2 serial ports, Ethernet, IRDA, and expansion
+  headers.  It comes with 16 MB SDRAM and 8 MB flash ROM.
+
+CONFIG_ARCH_AUTCPU12
+  Say Y if you intend to run the kernel on the autronix autcpu12
+  board. This board is based on a Cirrus Logic CS89712.
+
+CONFIG_EP72XX_ROM_BOOT
+  If you say Y here, your CLPS711x-based kernel will use the bootstrap
+  mode memory map instead of the normal memory map.
+
+  Processors derived from the Cirrus CLPS-711X core support two boot
+  modes.  Normal mode boots from the external memory device at CS0.
+  Bootstrap mode rearranges parts of the memory map, placing an
+  internal 128 byte bootstrap ROM at CS0.  This option performs the
+  address map changes required to support booting in this mode.
+
+  You almost surely want to say N here.

arch/arm/boot/Makefile

@@ -5,31 +5,31 @@
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
 #
-# Copyright (C) 1995-2000 Russell King
+# Copyright (C) 1995-2002 Russell King
 #
 
 SYSTEM	=$(TOPDIR)/vmlinux
 
 ifeq ($(CONFIG_CPU_26),y)
-ZTEXTADDR	 = 0x02080000
+ZRELADDR	 = 0x02080000
 PARAMS_PHYS	 = 0x0207c000
 INITRD_PHYS	 = 0x02180000
 INITRD_VIRT	 = 0x02180000
 endif
 
 ifeq ($(CONFIG_ARCH_RPC),y)
-ZTEXTADDR	 = 0x10008000
+ZRELADDR	 = 0x10008000
 PARAMS_PHYS	 = 0x10000100
 INITRD_PHYS	 = 0x18000000
 INITRD_VIRT	 = 0xc8000000
 endif
 
 ifeq ($(CONFIG_ARCH_CLPS7500),y)
-ZTEXTADDR	 = 0x10008000
+ZRELADDR	 = 0x10008000
 endif
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
-ZTEXTADDR	 = 0x00008000
+ZRELADDR	 = 0x00008000
 PARAMS_PHYS	 = 0x00000400
 INITRD_PHYS	 = 0x00800000
 INITRD_VIRT	 = 0xc0800000
@@ -41,41 +41,34 @@ ZRELADDR	 = 0x08008000
 endif
 
 ifeq ($(CONFIG_FOOTBRIDGE),y)
-ZTEXTADDR	 = 0x00008000
+ZRELADDR	 = 0x00008000
 PARAMS_PHYS	 = 0x00000100
 INITRD_PHYS	 = 0x00800000
 INITRD_VIRT	 = 0xc0800000
 endif
 
 ifeq ($(CONFIG_ARCH_INTEGRATOR),y)
-ZTEXTADDR	 = 0x00008000
+ZRELADDR	 = 0x00008000
 PARAMS_PHYS	 = 0x00000100
 INITRD_PHYS	 = 0x00800000
 INITRD_VIRT	 = 0xc0800000
 endif
 
 ifeq ($(CONFIG_ARCH_CAMELOT),y)
-ZTEXTADDR	 = 0x00008000
+ZRELADDR	 = 0x00008000
 endif
 
 ifeq ($(CONFIG_ARCH_NEXUSPCI),y)
-ZTEXTADDR	 = 0x40008000
+ZRELADDR	 = 0x40008000
 endif
 
 ifeq ($(CONFIG_ARCH_L7200),y)
-# RAM based kernel
-#ZTEXTADDR	 = 0xf0400000
-#ZRELADDR	 = 0xf0008000
-
-# FLASH based kernel
-ZTEXTADDR	 = 0x00010000
 ZRELADDR	 = 0xf0008000
-ZBSSADDR	 = 0xf03e0000
 endif
 
 # The standard locations for stuff on CLPS711x type processors
 ifeq ($(CONFIG_ARCH_CLPS711X),y)
-ZTEXTADDR	 = 0xc0028000
+ZRELADDR	 = 0xc0028000
 PARAMS_PHYS	 = 0xc0000100
 endif
 
@@ -90,60 +83,40 @@ INITRD_VIRT	 = 0xc0300000
 endif
 
 ifeq ($(CONFIG_ARCH_SA1100),y)
-ZTEXTADDR	 = 0xc0008000
 ZRELADDR	 = 0xc0008000
-ifeq ($(CONFIG_SA1100_VICTOR),y)
-  ZTEXTADDR	 = 0x00002000
-  ZBSSADDR	 = 0xc0200000
-endif
-ifeq ($(CONFIG_SA1100_SHERMAN),y)
-  ZTEXTADDR      = 0x00050000   
-  ZBSSADDR       = 0xc0200000
-endif
-ifeq ($(CONFIG_SA1100_GRAPHICSCLIENT),y)
-  ZTEXTADDR	 = 0xC0200000
-endif
-ifeq ($(CONFIG_SA1100_GRAPHICSMASTER),y)
-  ZTEXTADDR	 = 0xC0400000
-endif
-ifeq ($(CONFIG_SA1100_ADSBITSY),y)
-  ZTEXTADDR	 = 0xC0400000
-endif
-ifeq ($(CONFIG_SA1100_YOPY),y)
-  ZTEXTADDR      = 0x00080000
-  ZBSSADDR       = 0xc0200000
-endif
+# No defconfig file to move this into...
+#ifeq ($(CONFIG_SA1100_YOPY),y)
+#  ZTEXTADDR      = 0x00080000
+#  ZBSSADDR       = 0xc0200000
+#endif
 ifeq ($(CONFIG_SA1111),y)
   ZRELADDR	 = 0xc0208000
 endif
 endif
 
 ifeq ($(CONFIG_ARCH_ANAKIN),y)
-ZTEXTADDR	 = 0x20008000
+ZRELADDR	 = 0x20008000
 endif
 
 ifeq ($(CONFIG_ARCH_IQ80310),y)
 ZRELADDR	 = 0xa0008000
-
-# for serial upload
-ZTEXTADDR	 = 0xa1008000
-
-# for direct flash execution
-# ZTEXTADDR	 = 0x00060000
-# ZBSSADDR	 = 0xa1008000
 endif
 
 ifeq ($(CONFIG_ARCH_ADIFCC),y)
 ZRELADDR	 = 0xc0008000
-ZTEXTADDR	 = 0xc1000000
 endif
 
 #
-# If you don't define ZRELADDR above,
-# then it defaults to ZTEXTADDR
+# We now have a PIC decompressor implementation.  Decompressors running
+# from RAM should not define ZTEXTADDR.  Decompressors running directly
+# from ROM or Flash must define ZTEXTADDR (preferably via the config)
 #
-ifeq ($(ZRELADDR),)
-ZRELADDR	= $(ZTEXTADDR)
+ifeq ($(CONFIG_ZBOOT_ROM),y)
+ZTEXTADDR	=0x$(CONFIG_ZBOOT_ROM_TEXT)
+ZBSSADDR	=0x$(CONFIG_ZBOOT_ROM_BSS)
+else
+ZTEXTADDR	=0
+ZBSSADDR	=ALIGN(4)
 endif
 
 export	SYSTEM ZTEXTADDR ZBSSADDR ZRELADDR INITRD_PHYS INITRD_VIRT PARAMS_PHYS

arch/arm/boot/compressed/Makefile

@@ -9,7 +9,7 @@
 
 HEAD		 = head.o
 OBJS		 = misc.o
-CFLAGS		 = $(CPPFLAGS) -O2 -DSTDC_HEADERS $(CFLAGS_BOOT)
+CFLAGS		 = $(CPPFLAGS) -O2 -DSTDC_HEADERS $(CFLAGS_BOOT) -fpic
 FONTC		 = $(TOPDIR)/drivers/video/font_acorn_8x8.c
 ZLDFLAGS	 = -p -X -T vmlinux.lds
 
@@ -65,13 +65,7 @@ ifeq ($(CONFIG_CPU_XSCALE),y)
 OBJS		+= head-xscale.o
 endif
 
-SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/LOAD_ADDR/$(ZRELADDR)/;
-
-ifneq ($(ZBSSADDR),)
-SEDFLAGS	+= s/BSS_START/$(ZBSSADDR)/
-else
-SEDFLAGS	+= s/BSS_START/ALIGN(4)/
-endif
+SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/LOAD_ADDR/$(ZRELADDR)/;s/BSS_START/$(ZBSSADDR)/
 
 LIBGCC		:= $(shell $(CC) $(CFLAGS) --print-libgcc-file-name)
 

arch/arm/boot/compressed/head-clps7500.S

@@ -13,7 +13,7 @@
 		/* This branch is taken if the CPU memory width matches the
 		   actual device in use.  The default at power on is 16 bits
 		   so we must be prepared for a mismatch. */
-		.section ".start", #alloc, #execinstr
+		.section ".start", "ax"
 2:
 		b	1f
 		.word	0xffff

arch/arm/boot/compressed/head-epxa10db.S

 #include <asm/mach-types.h>
 #include <asm/arch/excalibur.h>
 
-		.section	".start", #alloc, #execinstr
+		.section	".start", "ax"
 		mov	r7, #MACH_TYPE_CAMELOT

arch/arm/boot/compressed/head-ftvpci.S

@@ -13,7 +13,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-	.section        ".start", #alloc, #execinstr
+	.section        ".start", "ax"
 ftv_start:
 	mcr	p15, 0, r0, c7, c5, 0		@ flush I cache
 	mrc	p15, 0, r0, c1, c0

arch/arm/boot/compressed/head-integrator.S

 #include <asm/mach-types.h>
 
-		.section	".start", #alloc, #execinstr
+		.section	".start", "ax"
 		mov	r7, #MACH_TYPE_INTEGRATOR

arch/arm/boot/compressed/head-l7200.S

@@ -13,7 +13,7 @@
 #error What am I doing here...
 #endif
 
-		.section        ".start", #alloc, #execinstr
+		.section        ".start", "ax"
 
 __L7200_start:
 		mov	r0, #0x00100000		@ FLASH address of initrd

arch/arm/boot/compressed/head-netwinder.S

 /*
  *  linux/arch/arm/boot/compressed/head-netwinder.S
  *
- *  Copyright (C) 2000 Russell King
+ *  Copyright (C) 2000-2002 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define K(a,b,c)	((a) << 24 | (b) << 12 | (c))
+		.section	".start", "ax"
 
-		.section	".start", #alloc, #execinstr
-
-		/*
-		 * check to see if we are running from the correct address.
-		 * If not, we move ourselves in a two stage process.  Firstly,
-		 * we copy the start of the kernel (which includes this code)
-		 * to 0x8000, and then jump to this code to continue with the
-		 * rest (since this code will get overwritten).
-		 */
-		adr	r2, 1f
-		ldmdb	r2, {r9, r10}
-		and	r3, r2, #0xc000
-		teq	r3, #0x8000	@ correctly located?
-		beq	2f		@ skip this code
-		bic	r3, r2, #0xc000
-		orr	r3, r3, #0x8000
-		mov	r0, r3		@ new address if '1'
-		mov	r4, #64		@ number of bytes to copy
-		sub	r5, r10, r9	@ total number of bytes to copy
-		b	1f
-
-		.word	_start
-		.word	__bss_start
-
-1:
-		.rept	4
-		ldmia	r2!, {r6, r9, r10, r11}
-		stmia	r3!, {r6, r9, r10, r11}
-		.endr
-		subs	r4, r4, #64
-		bcs	1b
-		movs	r4, r5		@ remaining length
-		mov	r5, #0		@ no more to copy
-		movne	pc, r0		@ jump back to 1 (in the newly copied
-					@ code)
-		mov	r7, #5		@ only here to fix NeTTroms which dont
-		mov	r8, #2 << 24		@ scheduled for removal in 2.5.xx
-		orr	r8, r8, #5 << 12
-2:
+		mov	r7, #5
+		mov	r8, #0

arch/arm/boot/compressed/head-sa1100.S

@@ -11,7 +11,7 @@
 #include <linux/linkage.h>
 #include <asm/mach-types.h>
 
-		.section        ".start", #alloc, #execinstr
+		.section        ".start", "ax"
 
 __SA1100_start:
 

arch/arm/boot/compressed/head-shark.S

@@ -16,7 +16,7 @@
 
 #include <asm/assembler.h>
 	
-		.section	".start", #alloc, #execinstr
+		.section	".start", "ax"
 
 		b	__beginning
 	

arch/arm/boot/compressed/head-xscale.S

@@ -9,7 +9,7 @@
 #include <linux/linkage.h>
 #include <asm/mach-types.h>
 
-		.section        ".start", #alloc, #execinstr
+		.section        ".start", "ax"
 
 __XScale_start:
 

arch/arm/boot/compressed/head.S

@@ -132,10 +132,28 @@ not_angel:
 		 */
 
 		.text
-1:		adr	r2, LC0
-		ldmia	r2, {r2, r3, r4, r5, sp}
+		adr	r0, LC0
+		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+		subs	r0, r0, r1		@ calculate the delta offset
+
+		teq	r0, #0			@ if delta is zero, we're
+		beq	not_relocated		@ running at the address we
+						@ were linked at.
+
+		add	r2, r2, r0		@ different address, so we
+		add	r3, r3, r0		@ need to fix up various
+		add	r5, r5, r0		@ pointers.
+		add	r6, r6, r0
+		add	ip, ip, r0
+		add	sp, sp, r0
+
+1:		ldr	r1, [r6, #0]		@ relocate entries in the GOT
+		add	r1, r1, r0		@ table.  This fixes up the
+		str	r1, [r6], #4		@ C references.
+		cmp	r6, ip
+		blt	1b
 
-		mov	r0, #0
+not_relocated:	mov	r0, #0
 1:		str	r0, [r2], #4		@ clear bss
 		str	r0, [r2], #4
 		str	r0, [r2], #4
@@ -149,17 +167,26 @@ not_angel:
 		mov	r1, sp			@ malloc space above stack
 		add	r2, sp, #0x10000	@ 64k max
 
-		teq	r4, r5			@ will we overwrite ourselves?
-		moveq	r5, r2			@ decompress after image
-		movne	r5, r4			@ decompress to final location
+/*
+ * Check to see if we will overwrite ourselves.
+ *   r4 = final kernel address
+ *   r5 = start of this image
+ *   r2 = end of malloc space (and therefore this image)
+ * We basically want:
+ *   r4 >= r2 -> OK
+ *   r4 + image length <= r5 -> OK
+ */
+		cmp	r4, r2
+		bhs	wont_overwrite
+		add	r0, r4, #4096*1024	@ 4MB largest kernel size
+		cmp	r0, r5
+		bls	wont_overwrite
 
+		mov	r5, r2			@ decompress after malloc space
 		mov	r0, r5
 		mov	r3, r7
 		bl	SYMBOL_NAME(decompress_kernel)
 
-		teq	r4, r5			@ do we need to relocate
-		beq	call_kernel		@ the kernel?
-
 		add	r0, r0, #127
 		bic	r0, r0, #127		@ align the kernel length
 /*
@@ -184,12 +211,26 @@ not_angel:
 		bl	cache_clean_flush
 		add	pc, r5, r0		@ call relocation code
 
+/*
+ * We're not in danger of overwriting ourselves.  Do this the simple way.
+ *
+ * r4     = kernel execution address
+ * r7     = architecture ID
+ */
+wont_overwrite:	mov	r0, r4
+		mov	r3, r7
+		bl	SYMBOL_NAME(decompress_kernel)
+		b	call_kernel
+
 		.type	LC0, #object
-LC0:		.word	__bss_start
-		.word	_end
-		.word	_load_addr
-		.word	_start
-		.word	user_stack+4096
+LC0:		.word	LC0			@ r1
+		.word	__bss_start		@ r2
+		.word	_end			@ r3
+		.word	_load_addr		@ r4
+		.word	_start			@ r5
+		.word	_got_start		@ r6
+		.word	_got_end		@ r7
+		.word	user_stack+4096		@ r8
 		.size	LC0, . - LC0
 
 /*
@@ -518,5 +559,5 @@ memdump:	mov	r12, r0
 reloc_end:
 
 		.align
-		.section	".stack"
+		.section ".stack", "aw"
 user_stack:	.space	4096

arch/arm/boot/compressed/vmlinux.lds.in

@@ -35,29 +35,26 @@ SECTIONS
 
   _etext = .;
 
-  .data : {
-    *(.data)
-  }
-
+  _got_start = .;
+  .got			: { *(.got) }
+  _got_end = .;
+  .got.plt		: { *(.got.plt) }
+  .data			: { *(.data) }
   _edata = .;
 
   . = BSS_START;
   __bss_start = .;
-  .bss : {
-    *(.bss)
-  }
+  .bss			: { *(.bss) }
   _end = .;
 
-  .stack : {
-    *(.stack)
-  }
+  .stack (NOLOAD)	: { *(.stack) }
 
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
+  .stab 0		: { *(.stab) }
+  .stabstr 0		: { *(.stabstr) }
+  .stab.excl 0		: { *(.stab.excl) }
+  .stab.exclstr 0	: { *(.stab.exclstr) }
+  .stab.index 0		: { *(.stab.index) }
+  .stab.indexstr 0	: { *(.stab.indexstr) }
+  .comment 0		: { *(.comment) }
 }
 

arch/arm/config.in

@@ -433,6 +433,12 @@ else
    define_bool CONFIG_FIQ n
 fi
 
+# Compressed boot loader in ROM.  Yes, we really want to ask about
+# TEXT and BSS so we preserve their values in the config files.
+bool 'Compressed boot loader in ROM/flash' CONFIG_ZBOOT_ROM
+hex 'Compressed ROM boot loader base address' CONFIG_ZBOOT_ROM_TEXT 0
+hex 'Compressed ROM boot loader BSS address' CONFIG_ZBOOT_ROM_BSS 0
+
 if [ "$CONFIG_ARCH_SA1100" = "y" -o \
      "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
    dep_bool 'Support CPU clock change (EXPERIMENTAL)' CONFIG_CPU_FREQ $CONFIG_EXPERIMENTAL

arch/arm/def-configs/iq80310

@@ -139,6 +139,9 @@ CONFIG_ARM_THUMB=y
 #
 # General setup
 #
+CONFIG_ZBOOT_ROM=y
+CONFIG_ZBOOT_ROM_TEXT=0x00060000
+CONFIG_ZBOOT_ROM_BSS=0xa1008000
 CONFIG_PCI=y
 # CONFIG_ISA is not set
 # CONFIG_ISA_DMA is not set

arch/arm/def-configs/lusl7200

@@ -23,6 +23,9 @@ CONFIG_CPU_32=y
 # CONFIG_CPU_26 is not set
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ARM720=y
+CONFIG_ZBOOT_ROM=y
+CONFIG_ZBOOT_ROM_TEXT=0x00010000
+CONFIG_ZBOOT_ROM_BSS=0xf03e0000
 # CONFIG_PCI is not set
 # CONFIG_ISA is not set
 # CONFIG_ISA_DMA is not set

arch/arm/def-configs/sherman

@@ -47,6 +47,9 @@ CONFIG_MODULES=y
 #
 # General setup
 #
+CONFIG_ZBOOT_ROM=y
+CONFIG_ZBOOT_ROM_TEXT=0x00050000
+CONFIG_ZBOOT_ROM_BSS=0xc0200000
 # CONFIG_NET is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set

arch/arm/def-configs/victor

@@ -46,6 +46,9 @@ CONFIG_MODULES=y
 #
 # General setup
 #
+CONFIG_ZBOOT_ROM=y
+CONFIG_ZBOOT_ROM_TEXT=0x00002000
+CONFIG_ZBOOT_ROM_BSS=0xc0200000
 # CONFIG_NET is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set

arch/arm/kernel/dma.c

@@ -17,6 +17,7 @@
 #include <linux/mman.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <linux/errno.h>
 
 #include <asm/dma.h>
 

arch/arm/kernel/entry-armv.S

@@ -756,7 +756,6 @@ __irq_svc:	sub	sp, sp, #S_FRAME_SIZE
 #ifdef CONFIG_PREEMPT
 		ldr	r0, [r8, #TI_FLAGS]		@ get flags
 		tst	r0, #_TIF_NEED_RESCHED
-		ldrne	r6, .LCirq_stat
 		blne	svc_preempt
 preempt_return:
 		ldr	r0, [r8, #TI_PREEMPT]		@ read preempt value
@@ -770,20 +769,20 @@ preempt_return:
 
 #ifdef CONFIG_PREEMPT
 svc_preempt:	teq	r9, #0				@ was preempt count = 0
+		ldreq	r6, .LCirq_stat
 		movne	pc, lr				@ no
 		ldr	r0, [r6, #4]			@ local_irq_count
 		ldr	r1, [r6, #8]			@ local_bh_count
 		adds	r0, r0, r1
 		movne	pc, lr
-		ldr	r1, [r8, #TI_TASK]
-		set_cpsr_c r2, #MODE_SVC		@ enable IRQs
-		str	r0, [r1, #0]			@ current->state = TASK_RUNNING
-1:		bl	SYMBOL_NAME(schedule)
+		mov	r7, #PREEMPT_ACTIVE
+		str	r7, [r8, #TI_PREEMPT]		@ set PREEMPT_ACTIVE
+1:		set_cpsr_c r2, #MODE_SVC		@ enable IRQs
+		bl	SYMBOL_NAME(schedule)
 		set_cpsr_c r0, #PSR_I_BIT | MODE_SVC	@ disable IRQs
-		ldr	r0, [r8, #TI_FLAGS]
+		ldr	r0, [r8, #TI_FLAGS]		@ get new tasks TI_FLAGS
 		tst	r0, #_TIF_NEED_RESCHED
-		beq	preempt_return
-		set_cpsr_c r0, #MODE_SVC		@ enable IRQs
+		beq	preempt_return			@ go again
 		b	1b
 #endif
 

arch/arm/kernel/entry-common.S

@@ -76,6 +76,9 @@ __do_notify_resume:
  * This is how we return from a fork.
  */
 ENTRY(ret_from_fork)
+#ifdef CONFIG_PREEMPT
+	bl	schedule_tail
+#endif
 	get_thread_info tsk
 	ldr	ip, [tsk, #TI_FLAGS]		@ check for syscall tracing
 	mov	why, #1

arch/arm/kernel/irq.c

@@ -29,6 +29,7 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/seq_file.h>
+#include <linux/errno.h>
 
 #include <asm/irq.h>
 #include <asm/system.h>

arch/arm/kernel/process.c

@@ -73,7 +73,7 @@ void (*pm_power_off)(void);
  * This is our default idle handler.  We need to disable
  * interrupts here to ensure we don't miss a wakeup call.
  */
-static void default_idle(void)
+void default_idle(void)
 {
 	__cli();
 	if (!need_resched() && !hlt_counter)

arch/arm/kernel/semaphore.c

@@ -13,6 +13,7 @@
  */
 #include <linux/config.h>
 #include <linux/sched.h>
+#include <linux/errno.h>
 
 #include <asm/semaphore.h>
 

arch/arm/kernel/setup.c

@@ -26,6 +26,7 @@
 #include <asm/procinfo.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
+#include <asm/tlbflush.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -255,7 +256,7 @@ static void __init setup_processor(void)
 	cpu_user = *list->user;
 #endif
 
-	printk("Processor: %s %s revision %d\n",
+	printk("CPU: %s %s revision %d\n",
 	       proc_info.manufacturer, proc_info.cpu_name,
 	       (int)processor_id & 15);
 

arch/arm/kernel/signal.c

@@ -628,14 +628,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 
 			case SIGSTOP: {
 				struct signal_struct *sig;
+				current->state = TASK_STOPPED;
 				current->exit_code = signr;
 				sig = current->parent->sig;
-				preempt_disable();
-				current->state = TASK_STOPPED;
 				if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
 					notify_parent(current, SIGCHLD);
 				schedule();
-				preempt_enable();
 				continue;
 			}
 

arch/arm/kernel/time.c

@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/timex.h>
+#include <linux/errno.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>

arch/arm/mach-clps711x/edb7211-mm.c

@@ -26,11 +26,10 @@
 #include <asm/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
+#include <asm/sizes.h>
  
 #include <asm/mach/map.h>
 
-#define MB1 1048576	/* one megabyte == size of an MMU section */
-
 extern void clps711x_map_io(void);
 
 /*
@@ -56,12 +55,12 @@ static struct map_desc edb7211_io_desc[] __initdata = {
  /* virtual, physical, length, domain, r, w, c, b */
 
  /* memory-mapped extra keyboard row and CS8900A Ethernet chip */
- { EP7211_VIRT_EXTKBD, EP7211_PHYS_EXTKBD, MB1, DOMAIN_IO, 0, 1, 0, 0 }, 
- { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, MB1, DOMAIN_IO, 0, 1, 0, 0 },
+ { EP7211_VIRT_EXTKBD,  EP7211_PHYS_EXTKBD,  SZ_1M, DOMAIN_IO, 0, 1, 0, 0 }, 
+ { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, SZ_1M, DOMAIN_IO, 0, 1, 0, 0 },
 
  /* flash banks */
- { EP7211_VIRT_FLASH1, EP7211_PHYS_FLASH1, MB1 * 8, DOMAIN_KERNEL, 0, 1, 0, 0 },
- { EP7211_VIRT_FLASH2, EP7211_PHYS_FLASH2, MB1 * 8, DOMAIN_KERNEL, 0, 1, 0, 0 },
+ { EP7211_VIRT_FLASH1,  EP7211_PHYS_FLASH1,  SZ_8M, DOMAIN_KERNEL, 0, 1, 0, 0 },
+ { EP7211_VIRT_FLASH2,  EP7211_PHYS_FLASH2,  SZ_8M, DOMAIN_KERNEL, 0, 1, 0, 0 },
 
  LAST_DESC
 };

arch/arm/mm/minicache.c

@@ -44,7 +44,7 @@ static pte_t *minicache_pte;
 unsigned long map_page_minicache(unsigned long virt)
 {
 	set_pte(minicache_pte, mk_pte_phys(__pa(virt), minicache_pgprot));
-	flush_kern_tlb_page(minicache_address);
+	flush_tlb_kernel_page(minicache_address);
 
 	return minicache_address;
 }

arch/arm/mm/proc-xscale.S

@@ -723,7 +723,6 @@ ENTRY(xscale_processor_functions)
 	.word	cpu_xscale_set_pgd
 	.word	cpu_xscale_set_pmd
 	.word	cpu_xscale_set_pte
-
 	.size	xscale_processor_functions, . - xscale_processor_functions
 
 	.type	cpu_80200_info, #object
@@ -779,6 +778,5 @@ __pxa250_proc_info:
 	.long	xscale_processor_functions
 	.long	v4wbi_tlb_fns
 	.long	v5te_mc_user_fns
-	.size	__cotulla_proc_info, . - __cotulla_proc_info
 	.size	__pxa250_proc_info, . - __pxa250_proc_info
 

arch/arm/mm/tlb-v3.S

@@ -53,6 +53,7 @@ ENTRY(v3_flush_user_tlb_range)
 	act_mm	r3				@ get current->active_mm
 	teq	r2, r3				@ == mm ?
 	movne	pc, lr				@ no, we dont do anything
+ENTRY(v3_flush_kern_tlb_range)
 	bic	r0, r0, #0x0ff
 	bic	r0, r0, #0xf00
 1:	mcr	p15, 0, r0, c6, c0, 0		@ invalidate TLB entry
@@ -87,5 +88,6 @@ ENTRY(v3_tlb_fns)
 	.long	v3_flush_user_tlb_mm
 	.long	v3_flush_user_tlb_range
 	.long	v3_flush_user_tlb_page
+	.long	v3_flush_kern_tlb_range
 	.long	v3_flush_kern_tlb_page
 	.size	v3_tlb_fns, . - v3_tlb_fns

arch/arm/mm/tlb-v4.S

@@ -42,7 +42,7 @@ ENTRY(v4_flush_kern_tlb_all)
 /*
  *	v4_flush_user_tlb_range(start, end, mm)
  *
- *	Invalidate a range of TLB entries in the specified address space.
+ *	Invalidate a range of TLB entries in the specified user address space.
  *
  *	- start - range start address
  *	- end   - range end address
@@ -85,6 +85,27 @@ ENTRY(v4_flush_user_tlb_page)
 	mcrne	p15, 0, r3, c8, c5, 0		@ invalidate I TLB
 	mov	pc, lr
 
+/*
+ *	v4_flush_kerm_tlb_range(start, end)
+ *
+ *	Invalidate a range of TLB entries in the specified kernel
+ *	address range.
+ *
+ *	- start - virtual address (may not be aligned)
+ *	- end   - virtual address (may not be aligned)
+ */
+	.align	5
+ENTRY(v4_flush_kern_tlb_range)
+	bic	r0, r0, #0x0ff
+	bic	r0, r0, #0xf00
+1:	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
+	add	r0, r0, #PAGE_SZ
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r3, c8, c5, 0		@ invalidate I TLB
+	mov	pc, lr
+
+
 /*
  *	v4_flush_kern_tlb_page(kaddr)
  *
@@ -106,5 +127,6 @@ ENTRY(v4_tlb_fns)
 	.long	v4_flush_user_tlb_mm
 	.long	v4_flush_user_tlb_range
 	.long	v4_flush_user_tlb_page
+	.long	v4_flush_kern_tlb_range
 	.long	v4_flush_kern_tlb_page
 	.size	v4_tlb_fns, . - v4_tlb_fns

arch/arm/mm/tlb-v4wb.S

@@ -88,7 +88,41 @@ ENTRY(v4wb_flush_user_tlb_page)
 	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, r3, c8, c5, 0		@ invalidate I TLB
+	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
+	mov	pc, lr
+
+/*
+ *	v4_flush_kerm_tlb_range(start, end)
+ *
+ *	Invalidate a range of TLB entries in the specified kernel
+ *	address range.
+ *
+ *	- start - virtual address (may not be aligned)
+ *	- end   - virtual address (may not be aligned)
+ */
+ENTRY(v4wb_flush_kern_tlb_range)
+	mov	r3, #0
+	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
+	bic	r0, r0, #0x0ff
+	bic	r0, r0, #0xf00
+	mcr	p15, 0, r3, c8, c5, 0		@ invalidate I TLB
+1:	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
+	add	r0, r0, #PAGE_SZ
+	cmp	r0, r1
+	blo	1b
+	mov	pc, lr
+
+/*
+ *	v4_flush_kern_tlb_page(kaddr)
+ *
+ *	Invalidate the TLB entry for the specified page.  The address
+ *	will be in the kernels virtual memory space.  Current uses
+ *	only require the D-TLB to be invalidated.
+ *
+ *	- kaddr - Kernel virtual memory address
+ */
 ENTRY(v4wb_flush_kern_tlb_page)
+	mcr	p15, 0, r3, c8, c5, 0		@ invalidate I TLB
 	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
 	mov	pc, lr
 
@@ -107,14 +141,17 @@ ENTRY(v4wb_flush_kern_tlb_page)
  */
 	.align	5
 ENTRY(v4wbi_flush_user_tlb_range)
+	vma_vm_mm ip, r2
 	act_mm	r3				@ get current->active_mm
-	teq	r2, r3				@ == mm ?
+	eors	r3, ip, r3			@ == mm ?
 	movne	pc, lr				@ no, we dont do anything
 	mov	r3, #0
 	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
+	vma_vm_flags r2, r2
 	bic	r0, r0, #0x0ff
 	bic	r0, r0, #0xf00
-1:	mcr	p15, 0, r0, c8, c5, 1		@ invalidate I TLB entry
+1:	tst	r2, #VM_EXEC
+	mcrne	p15, 0, r0, c8, c5, 1		@ invalidate I TLB entry
 	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
@@ -140,7 +177,23 @@ ENTRY(v4wbi_flush_user_tlb_page)
 	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
 	tst	r2, #VM_EXEC
 	mcrne	p15, 0, r0, c8, c5, 1		@ invalidate I TLB entry
+	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
+	mov	pc, lr
+
+ENTRY(v4wbi_flush_kern_tlb_range)
+	mov	r3, #0
+	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
+	bic	r0, r0, #0x0ff
+	bic	r0, r0, #0xf00
+1:	mcr	p15, 0, r0, c8, c5, 1		@ invalidate I TLB entry
+	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
+	add	r0, r0, #PAGE_SZ
+	cmp	r0, r1
+	blo	1b
+	mov	pc, lr
+
 ENTRY(v4wbi_flush_kern_tlb_page)
+	mcr	p15, 0, r0, c8, c5, 1		@ invalidate I TLB entry
 	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
 	mov	pc, lr
 
@@ -152,6 +205,7 @@ ENTRY(v4wb_tlb_fns)
 	.long	v4wb_flush_user_tlb_mm
 	.long	v4wb_flush_user_tlb_range
 	.long	v4wb_flush_user_tlb_page
+	.long	v4wb_flush_kern_tlb_range
 	.long	v4wb_flush_kern_tlb_page
 	.size	v4wb_tlb_fns, . - v4wb_tlb_fns
 
@@ -161,5 +215,6 @@ ENTRY(v4wbi_tlb_fns)
 	.long	v4wbi_flush_user_tlb_mm
 	.long	v4wbi_flush_user_tlb_range
 	.long	v4wbi_flush_user_tlb_page
+	.long	v4wbi_flush_kern_tlb_range
 	.long	v4wbi_flush_kern_tlb_page
 	.size	v4wbi_tlb_fns, . - v4wbi_tlb_fns

arch/arm/nwfpe/fpmodule.c

@@ -28,6 +28,7 @@
 #include <linux/config.h>
 
 /* XXX */
+#include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>

drivers/pcmcia/Makefile

@@ -71,6 +71,7 @@ sa1100_cs-objs-$(CONFIG_SA1100_PT_SYSTEM3)	+= sa1100_system3.o sa1111_generic.o
 sa1100_cs-objs-$(CONFIG_SA1100_SHANNON)		+= sa1100_shannon.o
 sa1100_cs-objs-$(CONFIG_SA1100_SIMPAD)		+= sa1100_simpad.o
 sa1100_cs-objs-$(CONFIG_SA1100_STORK)		+= sa1100_stork.o
+sa1100_cs-objs-$(CONFIG_SA1100_TRIZEPS) 	+= sa1100_trizeps.o
 sa1100_cs-objs-$(CONFIG_SA1100_XP860)		+= sa1100_xp860.o sa1111_generic.o
 sa1100_cs-objs-$(CONFIG_SA1100_YOPY)		+= sa1100_yopy.o
 

drivers/pcmcia/sa1100.h

@@ -237,6 +237,9 @@ extern void pcmcia_stork_exit(void);
 extern int pcmcia_system3_init(void);
 extern void pcmcia_system3_exit(void);
 
+extern int pcmcia_trizeps_init(void);
+extern void pcmcia_trizeps_exit(void);
+
 extern int pcmcia_xp860_init(void);
 extern void pcmcia_xp860_exit(void);
 

drivers/pcmcia/sa1100_generic.c

@@ -1180,6 +1180,9 @@ static int __init sa1100_pcmcia_init(void)
 #ifdef CONFIG_SA1100_STORK
 	pcmcia_stork_init();
 #endif
+#ifdef CONFIG_SA1100_TRIZEPS
+	pcmcia_trizeps_init();
+#endif
 #ifdef CONFIG_SA1100_XP860
 	pcmcia_xp860_init();
 #endif

drivers/pcmcia/sa1100_trizeps.c

+/*
+ * drivers/pcmcia/sa1100_trizeps.c
+ *
+ * PCMCIA implementation routines for Trizeps
+ *
+ * Authors:
+ * Andreas Hofer <ho@dsa-ac.de>,
+ * Peter Lueg <pl@dsa-ac.de>,
+ * Guennadi Liakhovetski <gl@dsa-ac.de>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>   // included trizeps.h
+#include <asm/system.h>
+#include <asm/irq.h>
+#include "sa1100_generic.h"
+
+#define NUMBER_OF_TRIZEPS_PCMCIA_SLOTS 1
+/**
+ *
+ *
+ ******************************************************/
+static int trizeps_pcmcia_init(struct pcmcia_init *init)
+{
+	int res;
+
+	/* Enable CF bus: */
+	TRIZEPS_BCR_clear(TRIZEPS_BCR1, TRIZEPS_nPCM_ENA_REG);
+
+	/* All those are inputs */
+	GPDR &= ~((GPIO_GPIO(TRIZEPS_GPIO_PCMCIA_CD0))
+		    | (GPIO_GPIO(TRIZEPS_GPIO_PCMCIA_IRQ0)));
+
+	/* Set transition detect */
+//	set_irq_type(SA1100_GPIO_TO_IRQ(GPIO_TRIZEPS_PCMCIA_CD0), IRQT_BOTHEDGE);
+	set_irq_type(TRIZEPS_IRQ_PCMCIA_IRQ0, IRQT_FALLING);
+
+	/* Register SOCKET interrupts */
+	/* WHY? */
+	set_irq_type(TRIZEPS_IRQ_PCMCIA_CD0, IRQT_NOEDGE);
+	res = request_irq( TRIZEPS_IRQ_PCMCIA_CD0, init->handler, SA_INTERRUPT, "PCMCIA_CD0", NULL );
+	if( res < 0 ) goto irq_err;
+
+	//MECR = 0x00060006; // Initialised on trizeps init
+
+	// return=sa1100_pcmcia_socket_count (sa1100_generic.c)
+	//        -> number of PCMCIA Slots
+	// Slot 0 -> Trizeps PCMCIA
+	// Slot 1 -> Trizeps ISA-Bus
+	return NUMBER_OF_TRIZEPS_PCMCIA_SLOTS;
+
+ irq_err:
+	printk( KERN_ERR __FUNCTION__ ": PCMCIA Request for IRQ %u failed\n", TRIZEPS_IRQ_PCMCIA_CD0 );
+	return -1;
+}
+
+/**
+ *
+ *
+ ******************************************************/
+static int trizeps_pcmcia_shutdown(void)
+{
+	printk(">>>>>PCMCIA TRIZEPS shutdown\n");
+	/* disable IRQs */
+	free_irq(TRIZEPS_IRQ_PCMCIA_CD0, NULL );
+
+	/* Disable CF bus: */
+	TRIZEPS_BCR_set(TRIZEPS_BCR1, TRIZEPS_nPCM_ENA_REG);
+
+	return 0;
+}
+
+/**
+ *
+
+ ******************************************************/
+static int trizeps_pcmcia_socket_state(struct pcmcia_state_array
+				       *state_array){
+	unsigned long levels;
+
+	if (state_array->size < NUMBER_OF_TRIZEPS_PCMCIA_SLOTS) return -1;
+
+	memset(state_array->state, 0,
+	       (state_array->size)*sizeof(struct pcmcia_state));
+
+	levels = GPLR;
+
+	state_array->state[0].detect = ((levels & GPIO_GPIO(TRIZEPS_GPIO_PCMCIA_CD0)) == 0) ? 1 : 0;
+	state_array->state[0].ready  = ((levels & GPIO_GPIO(TRIZEPS_GPIO_PCMCIA_IRQ0)) != 0) ? 1 : 0;
+	state_array->state[0].bvd1   = ((TRIZEPS_BCR1 & TRIZEPS_PCM_BVD1) !=0 ) ? 1 : 0;
+	state_array->state[0].bvd2   = ((TRIZEPS_BCR1 & TRIZEPS_PCM_BVD2) != 0) ? 1 : 0;
+	state_array->state[0].wrprot = 0; // not write protected
+	state_array->state[0].vs_3v  = ((TRIZEPS_BCR1 & TRIZEPS_nPCM_VS1) == 0) ? 1 : 0; //VS1=0 -> vs_3v=1
+	state_array->state[0].vs_Xv  = ((TRIZEPS_BCR1 & TRIZEPS_nPCM_VS2) == 0) ? 1 : 0; //VS2=0 -> vs_Xv=1
+
+	return 1;  // success
+}
+
+/**
+ *
+ *
+ ******************************************************/
+static int trizeps_pcmcia_get_irq_info(struct pcmcia_irq_info *info){
+
+	switch (info->sock) {
+	case 0:
+		info->irq=TRIZEPS_IRQ_PCMCIA_IRQ0;
+		break;
+	case 1:
+		// MFTB2 use only one Slot
+	default:
+		return -1;
+	}
+	return 0;
+}
+
+/**
+ *
+ *
+ ******************************************************/
+static int trizeps_pcmcia_configure_socket(const struct pcmcia_configure *configure)
+{
+	unsigned long flags;
+
+	if(configure->sock>1) return -1;
+
+	local_irq_save(flags);
+
+	switch (configure->vcc) {
+	case 0:
+		printk(">>> PCMCIA Power off\n");
+		TRIZEPS_BCR_clear(TRIZEPS_BCR1, TRIZEPS_PCM_V3_EN_REG);
+		TRIZEPS_BCR_clear(TRIZEPS_BCR1, TRIZEPS_PCM_V5_EN_REG);
+		break;
+
+	case 33:
+		// 3.3V Power on
+		TRIZEPS_BCR_clear(TRIZEPS_BCR1, TRIZEPS_PCM_V3_EN_REG);
+		TRIZEPS_BCR_set(TRIZEPS_BCR1, TRIZEPS_PCM_V5_EN_REG);
+		break;
+	case 50:
+		// 5.0V Power on
+		TRIZEPS_BCR_set(TRIZEPS_BCR1, TRIZEPS_PCM_V3_EN_REG);
+		TRIZEPS_BCR_clear(TRIZEPS_BCR1, TRIZEPS_PCM_V5_EN_REG);
+		break;
+	default:
+		printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__,
+		       configure->vcc);
+		local_irq_restore(flags);
+		return -1;
+	}
+
+	if (configure->reset)
+		TRIZEPS_BCR_set(TRIZEPS_BCR1, TRIZEPS_nPCM_RESET_DISABLE);   // Reset
+	else
+		TRIZEPS_BCR_clear(TRIZEPS_BCR1, TRIZEPS_nPCM_RESET_DISABLE); // no Reset
+	/*
+	  printk(" vcc=%u vpp=%u -->reset=%i\n",
+	  configure->vcc,
+	  configure->vpp,
+	  ((BCR_read(1) & nPCM_RESET_DISABLE)? 1:0));
+	*/
+	local_irq_restore(flags);
+
+	if (configure->irq) {
+		enable_irq(TRIZEPS_IRQ_PCMCIA_CD0);
+		enable_irq(TRIZEPS_IRQ_PCMCIA_IRQ0);
+	} else {
+		disable_irq(TRIZEPS_IRQ_PCMCIA_IRQ0);
+		disable_irq(TRIZEPS_IRQ_PCMCIA_CD0);
+	}
+
+	return 0;
+}
+
+static int trizeps_pcmcia_socket_init(int sock)
+{
+	return 0;
+}
+
+static int trizeps_pcmcia_socket_suspend(int sock)
+{
+	return 0;
+}
+
+/**
+ * low-level PCMCIA interface
+ *
+ ******************************************************/
+struct pcmcia_low_level trizeps_pcmcia_ops = {
+	init:			trizeps_pcmcia_init,
+	shutdown:		trizeps_pcmcia_shutdown,
+	socket_state:		trizeps_pcmcia_socket_state,
+	get_irq_info:		trizeps_pcmcia_get_irq_info,
+	configure_socket:	trizeps_pcmcia_configure_socket,
+	socket_init:		trizeps_pcmcia_socket_init,
+	socket_suspend:		trizeps_pcmcia_socket_suspend,
+};
+
+int __init pcmcia_trizeps_init(void)
+{
+	if (machine_is_trizeps()) {
+		return sa1100_register_pcmcia(&trizeps_pcmcia_ops);
+	}
+	return -ENODEV;
+}
+
+void __exit pcmcia_trizeps_exit(void)
+{
+	sa1100_unregister_pcmcia(&trizeps_pcmcia_ops);
+}

drivers/video/anakinfb.c

@@ -180,7 +180,7 @@ anakinfb_init(void)
 {
 	memset(&fb_info, 0, sizeof(struct fb_info));
 	strcpy(fb_info.modename, "AnakinFB");
-	fb_info.node = -1;
+	fb_info.node = NODEV;
 	fb_info.flags = FBINFO_FLAG_DEFAULT;
 	fb_info.fbops = &anakinfb_ops;
 	fb_info.disp = &display;
@@ -192,7 +192,12 @@ anakinfb_init(void)
 
 	memset(&display, 0, sizeof(struct display));
 	anakinfb_get_var(&display.var, 0, &fb_info);
-	display.screen_base = ioremap(VGA_START, VGA_SIZE);
+	if (!(request_mem_region(VGA_START, VGA_SIZE, "vga")))
+		return -ENOMEM;
+	if (!(display.screen_base = ioremap(VGA_START, VGA_SIZE))) {
+		release_mem_region(VGA_START, VGA_SIZE);
+		return -EIO;
+	}
 	display.visual = FB_VISUAL_TRUECOLOR;
 	display.type = FB_TYPE_PACKED_PIXELS;
 	display.type_aux = 0;
@@ -209,8 +214,11 @@ anakinfb_init(void)
 	display.dispsw = &fbcon_dummy;
 #endif
 
-	if (register_framebuffer(&fb_info) < 0)
+	if (register_framebuffer(&fb_info) < 0) {
+		iounmap(display.screen_base);
+		release_mem_region(VGA_START, VGA_SIZE);
 		return -EINVAL;
+	}
 
 	MOD_INC_USE_COUNT;
 	return 0;

include/asm-arm/cacheflush.h

+/*
+ *  linux/include/asm-arm/cacheflush.h
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_CACHEFLUSH_H
+#define _ASMARM_CACHEFLUSH_H
+
+#include <asm/proc/cache.h>
+
+#endif

include/asm-arm/io.h

@@ -272,7 +272,7 @@ extern void consistent_sync(void *vaddr, size_t size, int rw);
 /*
  * Change "struct page" to physical address.
  */
-#ifdef CONFIG_DISCONTIG
+#ifdef CONFIG_DISCONTIGMEM
 #define page_to_phys(page)					  \
 	((((page) - page_zone(page)->zone_mem_map) << PAGE_SHIFT) \
 		  + page_zone(page)->zone_start_paddr)

include/asm-arm/pgalloc.h

@@ -10,11 +10,10 @@
 #ifndef _ASMARM_PGALLOC_H
 #define _ASMARM_PGALLOC_H
 
-#include <linux/config.h>
-
 #include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
 
-#include <asm/proc/cache.h>
 #include <asm/proc/pgalloc.h>
 
 /*

include/asm-arm/proc-armo/cache.h

@@ -27,66 +27,3 @@
 
 /* DAG: ARM3 will flush cache on MEMC updates anyway? so don't bother */
 #define clean_cache_area(_start,_size) do { } while (0)
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb_all() flushes all processes TLBs
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- */
-#define flush_tlb_all()				memc_update_all()
-#define flush_tlb_mm(mm)			memc_update_mm(mm)
-#define flush_tlb_range(vma,start,end)		\
-		do { memc_update_mm(vma->vm_mm); (void)(start); (void)(end); } while (0)
-#define flush_tlb_page(vma, vmaddr)		do { } while (0)
-
-/*
- * The following handle the weird MEMC chip
- */
-static inline void memc_update_all(void)
-{
-	struct task_struct *p;
-
-	cpu_memc_update_all(init_mm.pgd);
-	for_each_task(p) {
-		if (!p->mm)
-			continue;
-		cpu_memc_update_all(p->mm->pgd);
-	}
-	processor._set_pgd(current->active_mm->pgd);
-}
-
-static inline void memc_update_mm(struct mm_struct *mm)
-{
-	cpu_memc_update_all(mm->pgd);
-
-	if (mm == current->active_mm)
-		processor._set_pgd(mm->pgd);
-}
-
-static inline void
-memc_clear(struct mm_struct *mm, struct page *page)
-{
-	cpu_memc_update_entry(mm->pgd, (unsigned long) page_address(page), 0);
-
-	if (mm == current->active_mm)
-		processor._set_pgd(mm->pgd);
-}
-
-static inline void
-memc_update_addr(struct mm_struct *mm, pte_t pte, unsigned long vaddr)
-{
-	cpu_memc_update_entry(mm->pgd, pte_val(pte), vaddr);
-
-	if (mm == current->active_mm)
-		processor._set_pgd(mm->pgd);
-}
-
-static inline void
-update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	memc_update_addr(mm, pte, addr);
-}

include/asm-arm/proc-armo/tlbflush.h

+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ */
+#define flush_tlb_all()				memc_update_all()
+#define flush_tlb_mm(mm)			memc_update_mm(mm)
+#define flush_tlb_range(vma,start,end)		\
+		do { memc_update_mm(vma->vm_mm); (void)(start); (void)(end); } while (0)
+#define flush_tlb_page(vma, vmaddr)		do { } while (0)
+
+/*
+ * The following handle the weird MEMC chip
+ */
+static inline void memc_update_all(void)
+{
+	struct task_struct *p;
+
+	cpu_memc_update_all(init_mm.pgd);
+	for_each_task(p) {
+		if (!p->mm)
+			continue;
+		cpu_memc_update_all(p->mm->pgd);
+	}
+	processor._set_pgd(current->active_mm->pgd);
+}
+
+static inline void memc_update_mm(struct mm_struct *mm)
+{
+	cpu_memc_update_all(mm->pgd);
+
+	if (mm == current->active_mm)
+		processor._set_pgd(mm->pgd);
+}
+
+static inline void
+memc_clear(struct mm_struct *mm, struct page *page)
+{
+	cpu_memc_update_entry(mm->pgd, (unsigned long) page_address(page), 0);
+
+	if (mm == current->active_mm)
+		processor._set_pgd(mm->pgd);
+}
+
+static inline void
+memc_update_addr(struct mm_struct *mm, pte_t pte, unsigned long vaddr)
+{
+	cpu_memc_update_entry(mm->pgd, pte_val(pte), vaddr);
+
+	if (mm == current->active_mm)
+		processor._set_pgd(mm->pgd);
+}
+
+static inline void
+update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	memc_update_addr(mm, pte, addr);
+}
+

include/asm-arm/proc-armv/cache.h

@@ -132,108 +132,3 @@ static inline void flush_dcache_page(struct page *page)
 	do {								\
 		cpu_icache_invalidate_range((_s), (_e));		\
 	} while (0)
-
-/*
- *	TLB Management
- *	==============
- *
- *	The arch/arm/mm/tlb-*.S files implement these methods.
- *
- *	The TLB specific code is expected to perform whatever tests it
- *	needs to determine if it should invalidate the TLB for each
- *	call.  Start addresses are inclusive and end addresses are
- *	exclusive; it is safe to round these addresses down.
- *
- *	flush_tlb_all()
- *
- *		Invalidate the entire TLB.
- *
- *	flush_tlb_mm(mm)
- *
- *		Invalidate all TLB entries in a particular address
- *		space.
- *		- mm	- mm_struct describing address space
- *
- *	flush_tlb_range(mm,start,end)
- *
- *		Invalidate a range of TLB entries in the specified
- *		address space.
- *		- mm	- mm_struct describing address space
- *		- start - start address (may not be aligned)
- *		- end	- end address (exclusive, may not be aligned)
- *
- *	flush_tlb_page(vaddr,vma)
- *
- *		Invalidate the specified page in the specified address range.
- *		- vaddr - virtual address (may not be aligned)
- *		- vma	- vma_struct describing address range
- *
- *	flush_kern_tlb_page(kaddr)
- *
- *		Invalidate the TLB entry for the specified page.  The address
- *		will be in the kernels virtual memory space.  Current uses
- *		only require the D-TLB to be invalidated.
- *		- kaddr - Kernel virtual memory address
- */
-
-struct cpu_tlb_fns {
-	void (*flush_kern_all)(void);
-	void (*flush_user_mm)(struct mm_struct *);
-	void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *);
-	void (*flush_user_page)(unsigned long, struct vm_area_struct *);
-	void (*flush_kern_page)(unsigned long);
-};
-
-/*
- * Convert calls to our calling convention.
- */
-#define flush_tlb_all()			__cpu_flush_kern_tlb_all()
-#define flush_tlb_mm(mm)		__cpu_flush_user_tlb_mm(mm)
-#define flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
-#define flush_tlb_page(vma,vaddr)	__cpu_flush_user_tlb_page(vaddr,vma)
-#define flush_kern_tlb_page(kaddr)	__cpu_flush_kern_tlb_page(kaddr)
-
-/*
- * Now select the calling method
- */
-#ifdef MULTI_TLB
-
-extern struct cpu_tlb_fns cpu_tlb;
-
-#define __cpu_flush_kern_tlb_all	cpu_tlb.flush_kern_all
-#define __cpu_flush_user_tlb_mm		cpu_tlb.flush_user_mm
-#define __cpu_flush_user_tlb_range	cpu_tlb.flush_user_range
-#define __cpu_flush_user_tlb_page	cpu_tlb.flush_user_page
-#define __cpu_flush_kern_tlb_page	cpu_tlb.flush_kern_page
-
-#else
-
-#define __cpu_flush_kern_tlb_all	__glue(_TLB,_flush_kern_tlb_all)
-#define __cpu_flush_user_tlb_mm		__glue(_TLB,_flush_user_tlb_mm)
-#define __cpu_flush_user_tlb_range	__glue(_TLB,_flush_user_tlb_range)
-#define __cpu_flush_user_tlb_page	__glue(_TLB,_flush_user_tlb_page)
-#define __cpu_flush_kern_tlb_page	__glue(_TLB,_flush_kern_tlb_page)
-
-extern void __cpu_flush_kern_tlb_all(void);
-extern void __cpu_flush_user_tlb_mm(struct mm_struct *);
-extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
-extern void __cpu_flush_user_tlb_page(unsigned long, struct vm_area_struct *);
-extern void __cpu_flush_kern_tlb_page(unsigned long);
-
-#endif
-
-/*
- * if PG_dcache_dirty is set for the page, we need to ensure that any
- * cache entries for the kernels virtual memory range are written
- * back to the page.
- */
-extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
-
-/*
- * Old ARM MEMC stuff.  This supports the reversed mapping handling that
- * we have on the older 26-bit machines.  We don't have a MEMC chip, so...
- */
-#define memc_update_all()		do { } while (0)
-#define memc_update_mm(mm)		do { } while (0)
-#define memc_update_addr(mm,pte,log)	do { } while (0)
-#define memc_clear(mm,physaddr)		do { } while (0)

include/asm-arm/proc-armv/tlbflush.h

+/*
+ *  linux/include/asm-arm/proc-armv/tlbflush.h
+ *
+ *  Copyright (C) 1999-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ *	TLB Management
+ *	==============
+ *
+ *	The arch/arm/mm/tlb-*.S files implement these methods.
+ *
+ *	The TLB specific code is expected to perform whatever tests it
+ *	needs to determine if it should invalidate the TLB for each
+ *	call.  Start addresses are inclusive and end addresses are
+ *	exclusive; it is safe to round these addresses down.
+ *
+ *	flush_tlb_all()
+ *
+ *		Invalidate the entire TLB.
+ *
+ *	flush_tlb_mm(mm)
+ *
+ *		Invalidate all TLB entries in a particular address
+ *		space.
+ *		- mm	- mm_struct describing address space
+ *
+ *	flush_tlb_range(mm,start,end)
+ *
+ *		Invalidate a range of TLB entries in the specified
+ *		address space.
+ *		- mm	- mm_struct describing address space
+ *		- start - start address (may not be aligned)
+ *		- end	- end address (exclusive, may not be aligned)
+ *
+ *	flush_tlb_page(vaddr,vma)
+ *
+ *		Invalidate the specified page in the specified address range.
+ *		- vaddr - virtual address (may not be aligned)
+ *		- vma	- vma_struct describing address range
+ *
+ *	flush_kern_tlb_page(kaddr)
+ *
+ *		Invalidate the TLB entry for the specified page.  The address
+ *		will be in the kernels virtual memory space.  Current uses
+ *		only require the D-TLB to be invalidated.
+ *		- kaddr - Kernel virtual memory address
+ */
+
+struct cpu_tlb_fns {
+	void (*flush_kern_all)(void);
+	void (*flush_user_mm)(struct mm_struct *);
+	void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *);
+	void (*flush_user_page)(unsigned long, struct vm_area_struct *);
+	void (*flush_kern_range)(unsigned long, unsigned long);
+	void (*flush_kern_page)(unsigned long);
+};
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define flush_tlb_all()			__cpu_flush_kern_tlb_all()
+#define flush_tlb_mm(mm)		__cpu_flush_user_tlb_mm(mm)
+#define flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
+#define flush_tlb_page(vma,vaddr)	__cpu_flush_user_tlb_page(vaddr,vma)
+#define flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
+#define flush_tlb_kernel_page(kaddr)	__cpu_flush_kern_tlb_page(kaddr)
+
+/*
+ * Now select the calling method
+ */
+#ifdef MULTI_TLB
+
+extern struct cpu_tlb_fns cpu_tlb;
+
+#define __cpu_flush_kern_tlb_all	cpu_tlb.flush_kern_all
+#define __cpu_flush_user_tlb_mm		cpu_tlb.flush_user_mm
+#define __cpu_flush_user_tlb_range	cpu_tlb.flush_user_range
+#define __cpu_flush_user_tlb_page	cpu_tlb.flush_user_page
+#define __cpu_flush_kern_tlb_range	cpu_tlb.flush_kern_range
+#define __cpu_flush_kern_tlb_page	cpu_tlb.flush_kern_page
+
+#else
+
+#define __cpu_flush_kern_tlb_all	__glue(_TLB,_flush_kern_tlb_all)
+#define __cpu_flush_user_tlb_mm		__glue(_TLB,_flush_user_tlb_mm)
+#define __cpu_flush_user_tlb_range	__glue(_TLB,_flush_user_tlb_range)
+#define __cpu_flush_user_tlb_page	__glue(_TLB,_flush_user_tlb_page)
+#define __cpu_flush_kern_tlb_range	__glue(_TLB,_flush_kern_tlb_range)
+#define __cpu_flush_kern_tlb_page	__glue(_TLB,_flush_kern_tlb_page)
+
+extern void __cpu_flush_kern_tlb_all(void);
+extern void __cpu_flush_user_tlb_mm(struct mm_struct *);
+extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+extern void __cpu_flush_user_tlb_page(unsigned long, struct vm_area_struct *);
+extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
+extern void __cpu_flush_kern_tlb_page(unsigned long);
+
+#endif
+
+/*
+ * if PG_dcache_dirty is set for the page, we need to ensure that any
+ * cache entries for the kernels virtual memory range are written
+ * back to the page.
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
+
+/*
+ * ARM processors do not cache TLB tables in RAM.
+ */
+#define flush_tlb_pgtables(mm,start,end)	do { } while (0)
+
+/*
+ * Old ARM MEMC stuff.  This supports the reversed mapping handling that
+ * we have on the older 26-bit machines.  We don't have a MEMC chip, so...
+ */
+#define memc_update_all()		do { } while (0)
+#define memc_update_mm(mm)		do { } while (0)
+#define memc_update_addr(mm,pte,log)	do { } while (0)
+#define memc_clear(mm,physaddr)		do { } while (0)
+

include/asm-arm/thread_info.h

@@ -102,6 +102,8 @@ static inline unsigned long __thread_saved_fp(struct thread_info *thread)
 
 #endif
 
+#define PREEMPT_ACTIVE	0x04000000
+
 /*
  * thread information flags:
  *  TIF_SYSCALL_TRACE	- syscall trace active

include/asm-arm/tlbflush.h

+/*
+ *  linux/include/asm-arm/tlbflush.h
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_TLBFLUSH_H
+#define _ASMARM_TLBFLUSH_H
+
+#include <asm-arm/proc/tlbflush.h>
+
+#endif