Commit 9728fe3f authored by Peter Meerwald's avatar Peter Meerwald Committed by Jonathan Cameron

staging:iio:hmc5843: Tighten comments

Signed-off-by: default avatarPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 511c81e6
...@@ -51,15 +51,11 @@ enum hmc5843_ids { ...@@ -51,15 +51,11 @@ enum hmc5843_ids {
#define HMC5843_RANGE_GAIN_DEFAULT 0x01 #define HMC5843_RANGE_GAIN_DEFAULT 0x01
#define HMC5843_RANGE_GAIN_MAX 0x07 #define HMC5843_RANGE_GAIN_MAX 0x07
/* /* Device status */
* Device status
*/
#define HMC5843_DATA_READY 0x01 #define HMC5843_DATA_READY 0x01
#define HMC5843_DATA_OUTPUT_LOCK 0x02 #define HMC5843_DATA_OUTPUT_LOCK 0x02
/* /* Mode register configuration */
* Mode register configuration
*/
#define HMC5843_MODE_CONVERSION_CONTINUOUS 0x00 #define HMC5843_MODE_CONVERSION_CONTINUOUS 0x00
#define HMC5843_MODE_CONVERSION_SINGLE 0x01 #define HMC5843_MODE_CONVERSION_SINGLE 0x01
#define HMC5843_MODE_IDLE 0x02 #define HMC5843_MODE_IDLE 0x02
...@@ -75,18 +71,14 @@ enum hmc5843_ids { ...@@ -75,18 +71,14 @@ enum hmc5843_ids {
#define HMC5843_RATE_BITMASK 0x1C #define HMC5843_RATE_BITMASK 0x1C
#define HMC5843_RATE_NOT_USED 0x07 #define HMC5843_RATE_NOT_USED 0x07
/* /* Device measurement configuration */
* Device measurement configuration
*/
#define HMC5843_MEAS_CONF_NORMAL 0x00 #define HMC5843_MEAS_CONF_NORMAL 0x00
#define HMC5843_MEAS_CONF_POSITIVE_BIAS 0x01 #define HMC5843_MEAS_CONF_POSITIVE_BIAS 0x01
#define HMC5843_MEAS_CONF_NEGATIVE_BIAS 0x02 #define HMC5843_MEAS_CONF_NEGATIVE_BIAS 0x02
#define HMC5843_MEAS_CONF_NOT_USED 0x03 #define HMC5843_MEAS_CONF_NOT_USED 0x03
#define HMC5843_MEAS_CONF_MASK 0x03 #define HMC5843_MEAS_CONF_MASK 0x03
/* /* Scaling factors: 10000000/Gain */
* Scaling factors: 10000000/Gain
*/
static const int hmc5843_regval_to_nanoscale[] = { static const int hmc5843_regval_to_nanoscale[] = {
6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714 6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment