Commit 97c9de66 authored by Dhinakaran Pandiyan's avatar Dhinakaran Pandiyan Committed by Jani Nikula

drm/i915/psr: Fix ALPM cap check for PSR2

While touching the code around this, I noticed that absence of ALPM
capability does not stop us from enabling PSR2. But, the spec
unambiguously states that ALPM is required for PSR2 and so does this
commit that introduced this code

drm/i915/psr: enable ALPM for psr2

    As per edp1.4 spec , alpm is required for psr2 operation as it's
    used for all psr2  main link power down management and alpm enable
    bit must be set for psr2 operation.

Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: default avatarVathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: default avatarTarun Vyas <tarun.vyas@intel.com>
Signed-off-by: default avatarDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511195145.3829-6-dhinakaran.pandiyan@intel.com
parent 264ff016
...@@ -250,6 +250,10 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp) ...@@ -250,6 +250,10 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
if (INTEL_GEN(dev_priv) >= 9 && if (INTEL_GEN(dev_priv) >= 9 &&
(intel_dp->psr_dpcd[0] == DP_PSR2_WITH_Y_COORD_IS_SUPPORTED)) { (intel_dp->psr_dpcd[0] == DP_PSR2_WITH_Y_COORD_IS_SUPPORTED)) {
bool y_req = intel_dp->psr_dpcd[1] &
DP_PSR2_SU_Y_COORDINATE_REQUIRED;
bool alpm = intel_dp_get_alpm_status(intel_dp);
/* /*
* All panels that supports PSR version 03h (PSR2 + * All panels that supports PSR version 03h (PSR2 +
* Y-coordinate) can handle Y-coordinates in VSC but we are * Y-coordinate) can handle Y-coordinates in VSC but we are
...@@ -261,16 +265,13 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp) ...@@ -261,16 +265,13 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
* Y-coordinate requirement panels we would need to enable * Y-coordinate requirement panels we would need to enable
* GTC first. * GTC first.
*/ */
dev_priv->psr.sink_psr2_support = dev_priv->psr.sink_psr2_support = y_req && alpm;
intel_dp->psr_dpcd[1] & DP_PSR2_SU_Y_COORDINATE_REQUIRED;
DRM_DEBUG_KMS("PSR2 %ssupported\n", DRM_DEBUG_KMS("PSR2 %ssupported\n",
dev_priv->psr.sink_psr2_support ? "" : "not "); dev_priv->psr.sink_psr2_support ? "" : "not ");
if (dev_priv->psr.sink_psr2_support) { if (dev_priv->psr.sink_psr2_support) {
dev_priv->psr.colorimetry_support = dev_priv->psr.colorimetry_support =
intel_dp_get_colorimetry_status(intel_dp); intel_dp_get_colorimetry_status(intel_dp);
dev_priv->psr.alpm =
intel_dp_get_alpm_status(intel_dp);
dev_priv->psr.sink_sync_latency = dev_priv->psr.sink_sync_latency =
intel_dp_get_sink_sync_latency(intel_dp); intel_dp_get_sink_sync_latency(intel_dp);
} }
...@@ -351,13 +352,12 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp) ...@@ -351,13 +352,12 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
u8 dpcd_val = DP_PSR_ENABLE; u8 dpcd_val = DP_PSR_ENABLE;
/* Enable ALPM at sink for psr2 */ /* Enable ALPM at sink for psr2 */
if (dev_priv->psr.psr2_enabled && dev_priv->psr.alpm) if (dev_priv->psr.psr2_enabled) {
drm_dp_dpcd_writeb(&intel_dp->aux, drm_dp_dpcd_writeb(&intel_dp->aux, DP_RECEIVER_ALPM_CONFIG,
DP_RECEIVER_ALPM_CONFIG,
DP_ALPM_ENABLE); DP_ALPM_ENABLE);
if (dev_priv->psr.psr2_enabled)
dpcd_val |= DP_PSR_ENABLE_PSR2; dpcd_val |= DP_PSR_ENABLE_PSR2;
}
if (dev_priv->psr.link_standby) if (dev_priv->psr.link_standby)
dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE; dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val); drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment