Commit 98374e69 authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson

arm64: dts: qcom: sm8350: Set up WRAP2 QUPs

Set up I2C&SPI hosts and UARTs connected to WRAP2 and their respective pins.
Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-11-konrad.dybcio@somainline.org
parent 89345355
...@@ -667,6 +667,164 @@ qupv3_id_2: geniqup@8c0000 { ...@@ -667,6 +667,164 @@ qupv3_id_2: geniqup@8c0000 {
#size-cells = <2>; #size-cells = <2>;
ranges; ranges;
status = "disabled"; status = "disabled";
i2c14: i2c@880000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c14_default>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi14: spi@880000 {
compatible = "qcom,geni-spi";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c15: i2c@884000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c15_default>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi15: spi@884000 {
compatible = "qcom,geni-spi";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c16: i2c@888000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c16_default>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi16: spi@888000 {
compatible = "qcom,geni-spi";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c17: i2c@88c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c17_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi17: spi@88c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
/* QUP no. 18 seems to be strictly SPI/UART-only */
spi18: spi@890000 {
compatible = "qcom,geni-spi";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart18: serial@890000 {
compatible = "qcom,geni-uart";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart18_default>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
status = "disabled";
};
i2c19: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c19_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi19: spi@894000 {
compatible = "qcom,geni-spi";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
}; };
qupv3_id_0: geniqup@9c0000 { qupv3_id_0: geniqup@9c0000 {
...@@ -1417,6 +1575,13 @@ qup_uart6_default: qup-uart6-default { ...@@ -1417,6 +1575,13 @@ qup_uart6_default: qup-uart6-default {
bias-disable; bias-disable;
}; };
qup_uart18_default: qup-uart18-default {
pins = "gpio58", "gpio59";
function = "qup18";
drive-strength = <2>;
bias-disable;
};
qup_i2c0_default: qup-i2c0-default { qup_i2c0_default: qup-i2c0-default {
pins = "gpio4", "gpio5"; pins = "gpio4", "gpio5";
function = "qup0"; function = "qup0";
...@@ -1507,6 +1672,41 @@ qup_i2c13_default: qup-i2c13-default { ...@@ -1507,6 +1672,41 @@ qup_i2c13_default: qup-i2c13-default {
drive-strength = <2>; drive-strength = <2>;
bias-pull-up; bias-pull-up;
}; };
qup_i2c14_default: qup-i2c14-default {
pins = "gpio56", "gpio57";
function = "qup14";
drive-strength = <2>;
bias-disable;
};
qup_i2c15_default: qup-i2c15-default {
pins = "gpio60", "gpio61";
function = "qup15";
drive-strength = <2>;
bias-disable;
};
qup_i2c16_default: qup-i2c16-default {
pins = "gpio64", "gpio65";
function = "qup16";
drive-strength = <2>;
bias-disable;
};
qup_i2c17_default: qup-i2c17-default {
pins = "gpio72", "gpio73";
function = "qup17";
drive-strength = <2>;
bias-disable;
};
qup_i2c19_default: qup-i2c19-default {
pins = "gpio76", "gpio77";
function = "qup19";
drive-strength = <2>;
bias-disable;
};
}; };
rng: rng@10d3000 { rng: rng@10d3000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment