Skip to content

L
linux
Commit 985cafcc authored by Manuel Gebele's avatar Manuel Gebele Committed by Greg Kroah-Hartman
Browse files
Options

Staging: Comedi: vmk80xx: Add k8061 support 

This patch adds support for the Velleman K8061 USB board
	http://www.velleman.be/ot/en/product/view/?id=364910Signed-off-by: default avatarManuel Gebele <forensixs@gmx.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent ba7834b3
Show whitespace changes
Inline Side-by-side
Showing with 1069 additions and 786 deletions
drivers/staging/comedi/drivers/vmk80xx.c
View file @ 985cafcc
/*
comedi/drivers/vmk80xx.c
Velleman USB Interface Board Kernel-Space Driver
Velleman USB Board Low-Level Driver
Copyright (C) 2009 Manuel Gebele <forensixs@gmx.de>, Germany
......@@ -24,11 +24,32 @@
*/
/*
Driver: vmk80xx
Description: Velleman USB Interface Board Kernel-Space Driver
Devices: K8055, K8061 (in development)
Description: Velleman USB Board Low-Level Driver
Devices: K8055/K8061 aka VM110/VM140
Author: Manuel Gebele <forensixs@gmx.de>
Updated: Tue, 21 Apr 2009 19:40:55 +0200
Updated: Sun, 10 May 2009 11:14:59 +0200
Status: works
Supports:
- analog input
- analog output
- digital input
- digital output
- counter
- pwm
*/
/*
Changelog:
0.8.81 -3- code completely rewritten (adjust driver logic)
0.8.81 -2- full support for K8061
0.8.81 -1- fix some mistaken among others the number of
supported boards and I/O handling
0.7.76 -4- renamed to vmk80xx
0.7.76 -3- detect K8061 (only theoretically supported)
0.7.76 -2- code completely rewritten (adjust driver logic)
0.7.76 -1- support for digital and counter subdevice
*/
#include <linux/kernel.h>
......@@ -39,1078 +60,1340 @@ Status: works
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/usb.h>
#include <asm/uaccess.h>
#include "../comedidev.h" /* comedi definitions */
/* ------------------------------------------------------------------------ */
#define VMK80XX_MODULE_DESC "Velleman USB Interface Board Kernel-Space Driver"
#define VMK80XX_MODULE_DEVICE "Velleman K8055/K8061 USB Interface Board"
#define VMK80XX_MODULE_AUTHOR "Copyright (C) 2009 Manuel Gebele, Germany"
#define VMK80XX_MODULE_LICENSE "GPL"
#define VMK80XX_MODULE_VERSION "0.7.76"
/* Module device ID's */
static struct usb_device_id vm_id_table[] = {
/* k8055 */
{ USB_DEVICE(0x10cf, 0x5500 + 0x00) }, /* @ddr. 0 */
{ USB_DEVICE(0x10cf, 0x5500 + 0x01) }, /* @ddr. 1 */
{ USB_DEVICE(0x10cf, 0x5500 + 0x02) }, /* @ddr. 2 */
{ USB_DEVICE(0x10cf, 0x5500 + 0x03) }, /* @ddr. 3 */
/* k8061 */
{ USB_DEVICE(0x10cf, 0x8061 + 0x00) }, /* @ddr. 0 */
{ USB_DEVICE(0x10cf, 0x8061 + 0x01) }, /* @ddr. 1 */
{ USB_DEVICE(0x10cf, 0x8061 + 0x02) }, /* @ddr. 2 */
{ USB_DEVICE(0x10cf, 0x8061 + 0x03) }, /* @ddr. 3 */
{ USB_DEVICE(0x10cf, 0x8061 + 0x04) }, /* @ddr. 4 */
{ USB_DEVICE(0x10cf, 0x8061 + 0x05) }, /* @ddr. 5 */
{ USB_DEVICE(0x10cf, 0x8061 + 0x06) }, /* @ddr. 6 */
{ USB_DEVICE(0x10cf, 0x8061 + 0x07) }, /* @ddr. 7 */
#include <linux/uaccess.h>
#include "../comedidev.h"
MODULE_AUTHOR("Manuel Gebele <forensixs@gmx.de>");
MODULE_DESCRIPTION("Velleman USB Board Low-Level Driver");
MODULE_SUPPORTED_DEVICE("K8055/K8061 aka VM110/VM140");
MODULE_VERSION("0.8.01");
MODULE_LICENSE("GPL");
enum {
DEVICE_VMK8055,
DEVICE_VMK8061
};
static struct usb_device_id vmk80xx_id_table[] = {
{ USB_DEVICE(0x10cf, 0x5500), .driver_info = DEVICE_VMK8055 },
{ USB_DEVICE(0x10cf, 0x5501), .driver_info = DEVICE_VMK8055 },
{ USB_DEVICE(0x10cf, 0x5502), .driver_info = DEVICE_VMK8055 },
{ USB_DEVICE(0x10cf, 0x5503), .driver_info = DEVICE_VMK8055 },
{ USB_DEVICE(0x10cf, 0x8061), .driver_info = DEVICE_VMK8061 },
{ USB_DEVICE(0x10cf, 0x8062), .driver_info = DEVICE_VMK8061 },
{ USB_DEVICE(0x10cf, 0x8063), .driver_info = DEVICE_VMK8061 },
{ USB_DEVICE(0x10cf, 0x8064), .driver_info = DEVICE_VMK8061 },
{ USB_DEVICE(0x10cf, 0x8065), .driver_info = DEVICE_VMK8061 },
{ USB_DEVICE(0x10cf, 0x8066), .driver_info = DEVICE_VMK8061 },
{ USB_DEVICE(0x10cf, 0x8067), .driver_info = DEVICE_VMK8061 },
{ USB_DEVICE(0x10cf, 0x8068), .driver_info = DEVICE_VMK8061 },
{ } /* terminating entry */
};
MODULE_DEVICE_TABLE(usb, vm_id_table);
MODULE_AUTHOR(VMK80XX_MODULE_AUTHOR);
MODULE_DESCRIPTION(VMK80XX_MODULE_DESC);
MODULE_SUPPORTED_DEVICE(VMK80XX_MODULE_DEVICE);
MODULE_VERSION(VMK80XX_MODULE_VERSION);
MODULE_LICENSE(VMK80XX_MODULE_LICENSE);
/* ------------------------------------------------------------------------ */
MODULE_DEVICE_TABLE(usb, vmk80xx_id_table);
#define VMK8055_DI_REG 0x00
#define VMK8055_DO_REG 0x01
#define VMK8055_AO1_REG 0x02
#define VMK8055_AO2_REG 0x03
#define VMK8055_AI1_REG 0x02
#define VMK8055_AI2_REG 0x03
#define VMK8055_CNT1_REG 0x04
#define VMK8055_CNT2_REG 0x06
#define VMK8061_CH_REG 0x01
#define VMK8061_DI_REG 0x01
#define VMK8061_DO_REG 0x01
#define VMK8061_PWM_REG1 0x01
#define VMK8061_PWM_REG2 0x02
#define VMK8061_CNT_REG 0x02
#define VMK8061_AO_REG 0x02
#define VMK8061_AI_REG1 0x02
#define VMK8061_AI_REG2 0x03
#define VMK8055_CMD_RST 0x00
#define VMK8055_CMD_DEB1_TIME 0x01
#define VMK8055_CMD_DEB2_TIME 0x02
#define VMK8055_CMD_RST_CNT1 0x03
#define VMK8055_CMD_RST_CNT2 0x04
#define VMK8055_CMD_WRT_AD 0x05
#define VMK8061_CMD_RD_AI 0x00
#define VMK8061_CMR_RD_ALL_AI 0x01 /* !non-active! */
#define VMK8061_CMD_SET_AO 0x02
#define VMK8061_CMD_SET_ALL_AO 0x03 /* !non-active! */
#define VMK8061_CMD_OUT_PWM 0x04
#define VMK8061_CMD_RD_DI 0x05
#define VMK8061_CMD_DO 0x06 /* !non-active! */
#define VMK8061_CMD_CLR_DO 0x07
#define VMK8061_CMD_SET_DO 0x08
#define VMK8061_CMD_RD_CNT 0x09 /* TODO: completely pointless? */
#define VMK8061_CMD_RST_CNT 0x0a /* TODO: completely pointless? */
#define VMK8061_CMD_RD_VERSION 0x0b /* internal usage */
#define VMK8061_CMD_RD_JMP_STAT 0x0c /* TODO: not implemented yet */
#define VMK8061_CMD_RD_PWR_STAT 0x0d /* internal usage */
#define VMK8061_CMD_RD_DO 0x0e
#define VMK8061_CMD_RD_AO 0x0f
#define VMK8061_CMD_RD_PWM 0x10
#define VMK80XX_MAX_BOARDS COMEDI_NUM_BOARD_MINORS
#define TRANS_OUT_BUSY 1
#define TRANS_IN_BUSY 2
#define TRANS_IN_RUNNING 3
#define IC3_VERSION (1 << 0)
#define IC6_VERSION (1 << 1)
#define URB_RCV_FLAG (1 << 0)
#define URB_SND_FLAG (1 << 1)
#define CONFIG_VMK80XX_DEBUG
#undef CONFIG_VMK80XX_DEBUG
//#undef CONFIG_COMEDI_DEBUG /* Uncommend this line to disable comedi debug */
#undef CONFIG_VMK80XX_DEBUG /* Commend this line to enable vmk80xx debug */
#ifdef CONFIG_VMK80XX_DEBUG
static int dbgvm = 1;
#else
static int dbgvm;
#endif
#ifdef CONFIG_COMEDI_DEBUG
static int cm_dbg = 1;
#else /* !CONFIG_COMEDI_DEBUG */
static int cm_dbg = 0;
#endif /* !CONFIG_COMEDI_DEBUG */
static int dbgcm = 1;
#else
static int dbgcm;
#endif
#define dbgvm(fmt, arg...) \
do { \
if (dbgvm) \
printk(KERN_DEBUG fmt, ##arg); \
} while (0)
#define dbgcm(fmt, arg...) \
do { \
if (dbgcm) \
printk(KERN_DEBUG fmt, ##arg); \
} while (0)
enum vmk80xx_model {
VMK8055_MODEL,
VMK8061_MODEL
};
struct firmware_version {
unsigned char ic3_vers[32]; /* USB-Controller */
unsigned char ic6_vers[32]; /* CPU */
};
static const struct comedi_lrange vmk8055_range = {
1, { UNI_RANGE(5) }
};
static const struct comedi_lrange vmk8061_range = {
2, { UNI_RANGE(5), UNI_RANGE(10) }
};
struct vmk80xx_board {
const char *name;
enum vmk80xx_model model;
const struct comedi_lrange *range;
__u8 ai_chans;
__le16 ai_bits;
__u8 ao_chans;
__le16 ao_bits;
__u8 di_chans;
__le16 di_bits;
__u8 do_chans;
__le16 do_bits;
__u8 cnt_chans;
__le16 cnt_bits;
__u8 pwm_chans;
__le16 pwm_bits;
};
enum {
VMK80XX_SUBD_AI,
VMK80XX_SUBD_AO,
VMK80XX_SUBD_DI,
VMK80XX_SUBD_DO,
VMK80XX_SUBD_CNT,
VMK80XX_SUBD_PWM,
};
#ifdef CONFIG_VMK80XX_DEBUG
static int vm_dbg = 1;
#else /* !CONFIG_VMK80XX_DEBUG */
static int vm_dbg = 0;
#endif /* !CONFIG_VMK80XX_DEBUG */
/* Define our own debug macros */
#define DBGCM(fmt, arg...) do { if (cm_dbg) printk(fmt, ##arg); } while (0)
#define DBGVM(fmt, arg...) do { if (vm_dbg) printk(fmt, ##arg); } while (0)
/* Velleman K8055 specific stuff */
#define VMK8055_DI 0 /* digital input offset */
#define VMK8055_DO 1 /* digital output offset */
#define VMK8055_AO1 2 /* analog output channel 1 offset */
#define VMK8055_AO2 3 /* analog output channel 2 offset */
#define VMK8055_CNT1 4 /* counter 1 offset */
#define VMK8055_CNT2 6 /* counter 2 offset */
#define VMK8055_CMD_RST 0x00 /* reset device registers */
#define VMK8055_CMD_DEB1 0x01 /* debounce time for pulse counter 1 */
#define VMK8055_CMD_DEB2 0x02 /* debounce time for pulse counter 2 */
#define VMK8055_CMD_RST_CNT1 0x03 /* reset pulse counter 1 */
#define VMK8055_CMD_RST_CNT2 0x04 /* reset pulse counter 2 */
#define VMK8055_CMD_AD 0x05 /* write to analog or digital channel */
#define VMK8055_EP_OUT 0x01 /* out endpoint address */
#define VMK8055_EP_IN 0x81 /* in endpoint address */
#define VMK8055_EP_SIZE 8 /* endpoint max packet size */
#define VMK8055_EP_INTERVAL 20 /* general conversion time per command */
#define VMK8055_MAX_BOARDS 16
/* Structure to hold all of our device specific stuff */
struct vmk80xx_usb {
struct usb_device *udev;
struct usb_interface *intf;
struct usb_endpoint_descriptor *ep_rx;
struct usb_endpoint_descriptor *ep_tx;
struct usb_anchor rx_anchor;
struct usb_anchor tx_anchor;
struct vmk80xx_board board;
struct firmware_version fw;
struct semaphore limit_sem;
wait_queue_head_t read_wait;
wait_queue_head_t write_wait;
size_t irq_out_endpoint_size;
__u8 irq_out_endpoint;
int irq_out_interval;
unsigned char *irq_out_buf;
struct urb *irq_out_urb;
int irq_out_busy;
size_t irq_in_endpoint_size;
__u8 irq_in_endpoint;
int irq_in_interval;
unsigned char *irq_in_buf;
struct urb *irq_in_urb;
int irq_in_busy;
int irq_in_running;
unsigned char *usb_rx_buf;
unsigned char *usb_tx_buf;
unsigned long flags;
int probed;
int attached;
int id;
int count;
};
static struct vmk80xx_usb vm_boards[VMK8055_MAX_BOARDS];
/* ---------------------------------------------------------------------------
* Abort active transfers and tidy up allocated resources.
--------------------------------------------------------------------------- */
static void vm_abort_transfers(struct vmk80xx_usb *vm)
{
DBGVM("comedi#: vmk80xx: %s\n", __func__);
if (vm->irq_in_running) {
vm->irq_in_running = 0;
if (vm->intf)
usb_kill_urb(vm->irq_in_urb);
}
static struct vmk80xx_usb vmb[VMK80XX_MAX_BOARDS];
if (vm->irq_out_busy && vm->intf)
usb_kill_urb(vm->irq_out_urb);
}
static DEFINE_MUTEX(glb_mutex);
static void vm_delete(struct vmk80xx_usb *vm)
static void vmk80xx_tx_callback(struct urb *urb)
{
DBGVM("comedi#: vmk80xx: %s\n", __func__);
struct vmk80xx_usb *dev = urb->context;
int stat = urb->status;
vm_abort_transfers(vm);
dbgvm("vmk80xx: %s\n", __func__);
/* Deallocate usb urbs and kernel buffers */
if (vm->irq_in_urb)
usb_free_urb(vm->irq_in_urb);
if (stat && !(stat == -ENOENT
|| stat == -ECONNRESET
|| stat == -ESHUTDOWN))
dbgcm("comedi#: vmk80xx: %s - nonzero urb status (%d)\n",
__func__, stat);
if (vm->irq_out_urb);
usb_free_urb(vm->irq_out_urb);
if (!test_bit(TRANS_OUT_BUSY, &dev->flags))
return;
if (vm->irq_in_buf)
kfree(vm->irq_in_buf);
clear_bit(TRANS_OUT_BUSY, &dev->flags);
if (vm->irq_out_buf)
kfree(vm->irq_out_buf);
wake_up_interruptible(&dev->write_wait);
}
/* ---------------------------------------------------------------------------
* Interrupt in and interrupt out callback for usb data transfer.
--------------------------------------------------------------------------- */
static void vm_irq_in_callback(struct urb *urb)
static void vmk80xx_rx_callback(struct urb *urb)
{
struct vmk80xx_usb *vm = (struct vmk80xx_usb *)urb->context;
int err;
struct vmk80xx_usb *dev = urb->context;
int stat = urb->status;
DBGVM("comedi#: vmk80xx: %s\n", __func__);
dbgvm("vmk80xx: %s\n", __func__);
switch (urb->status) {
case 0: /* success */
switch (stat) {
case 0:
break;
case -ENOENT:
case -ECONNRESET:
case -ESHUTDOWN:
break;
default:
DBGCM("comedi#: vmk80xx: %s - nonzero urb status (%d)\n",
__func__, urb->status);
goto resubmit; /* maybe we can recover */
dbgcm("comedi#: vmk80xx: %s - nonzero urb status (%d)\n",
__func__, stat);
goto resubmit;
}
goto exit;
resubmit:
if (vm->irq_in_running && vm->intf) {
err = usb_submit_urb(vm->irq_in_urb, GFP_ATOMIC);
if (!err) goto exit;
/* FALL THROUGH */
DBGCM("comedi#: vmk80xx: %s - submit urb failed (err# %d)\n",
__func__, err);
if (test_bit(TRANS_IN_RUNNING, &dev->flags) && dev->intf) {
usb_anchor_urb(urb, &dev->rx_anchor);
if (!usb_submit_urb(urb, GFP_KERNEL))
goto exit;
err("comedi#: vmk80xx: %s - submit urb failed\n", __func__);
usb_unanchor_urb(urb);
}
exit:
vm->irq_in_busy = 0;
clear_bit(TRANS_IN_BUSY, &dev->flags);
/* interrupt-in pipe is available again */
wake_up_interruptible(&vm->read_wait);
wake_up_interruptible(&dev->read_wait);
}
static void vm_irq_out_callback(struct urb *urb)
static int vmk80xx_check_data_link(struct vmk80xx_usb *dev)
{
struct vmk80xx_usb *vm;
unsigned int tx_pipe, rx_pipe;
unsigned char tx[1], rx[2];
dbgvm("vmk80xx: %s\n", __func__);
DBGVM("comedi#: vmk80xx: %s\n", __func__);
tx_pipe = usb_sndbulkpipe(dev->udev, 0x01);
rx_pipe = usb_rcvbulkpipe(dev->udev, 0x81);
/* sync/async unlink (hardware going away) faults aren't errors */
if (urb->status && !(urb->status == -ENOENT
|| urb->status == -ECONNRESET
|| urb->status == -ESHUTDOWN))
DBGCM("comedi#: vmk80xx: %s - nonzero urb status (%d)\n",
__func__, urb->status);
tx[0] = VMK8061_CMD_RD_PWR_STAT;
vm = (struct vmk80xx_usb *)urb->context;
vm->irq_out_busy = 0;
/* Check that IC6 (PIC16F871) is powered and
* running and the data link between IC3 and
* IC6 is working properly */
usb_bulk_msg(dev->udev, tx_pipe, tx, 1, NULL,
dev->ep_tx->bInterval);
usb_bulk_msg(dev->udev, rx_pipe, rx, 2, NULL,
HZ * 10);
/* interrupt-out pipe is available again */
wake_up_interruptible(&vm->write_wait);
return (int)rx[1];
}
/* ---------------------------------------------------------------------------
* Interface for digital/analog input/output and counter funcs (see below).
--------------------------------------------------------------------------- */
static int vm_read(struct vmk80xx_usb *vm)
static void vmk80xx_read_eeprom(struct vmk80xx_usb *dev, int flag)
{
struct usb_device *udev;
int retval = -ENODEV;
unsigned int tx_pipe, rx_pipe;
unsigned char tx[1], rx[64];
int cnt;
DBGVM("comedi#: vmk80xx: %s\n", __func__);
dbgvm("vmk80xx: %s\n", __func__);
/* Verify that the device wasn't un-plugged */
if (!vm->intf) {
DBGCM("comedi#: vmk80xx: %s - No dev or dev un-plugged\n",
__func__);
goto exit;
}
tx_pipe = usb_sndbulkpipe(dev->udev, 0x01);
rx_pipe = usb_rcvbulkpipe(dev->udev, 0x81);
if (vm->irq_in_busy) {
retval = wait_event_interruptible(vm->read_wait,
!vm->irq_in_busy);
if (retval < 0) { /* we were interrupted by a signal */
retval = -ERESTART;
goto exit;
}
tx[0] = VMK8061_CMD_RD_VERSION;
/* Read the firmware version info of IC3 and
* IC6 from the internal EEPROM of the IC */
usb_bulk_msg(dev->udev, tx_pipe, tx, 1, NULL,
dev->ep_tx->bInterval);
usb_bulk_msg(dev->udev, rx_pipe, rx, 64, &cnt,
HZ * 10);
rx[cnt] = '\0';
if (flag & IC3_VERSION)
strncpy(dev->fw.ic3_vers, rx + 1, 24);
else /* IC6_VERSION */
strncpy(dev->fw.ic6_vers, rx + 25, 24);
}
static int vmk80xx_reset_device(struct vmk80xx_usb *dev)
{
struct urb *urb;
unsigned int tx_pipe;
int ival;
size_t size;
dbgvm("vmk80xx: %s\n", __func__);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
tx_pipe = usb_sndintpipe(dev->udev, 0x01);
ival = dev->ep_tx->bInterval;
size = le16_to_cpu(dev->ep_tx->wMaxPacketSize);
dev->usb_tx_buf[0] = VMK8055_CMD_RST;
dev->usb_tx_buf[1] = 0x00;
dev->usb_tx_buf[2] = 0x00;
dev->usb_tx_buf[3] = 0x00;
dev->usb_tx_buf[4] = 0x00;
dev->usb_tx_buf[5] = 0x00;
dev->usb_tx_buf[6] = 0x00;
dev->usb_tx_buf[7] = 0x00;
usb_fill_int_urb(urb, dev->udev, tx_pipe, dev->usb_tx_buf,
size, vmk80xx_tx_callback, dev, ival);
usb_anchor_urb(urb, &dev->tx_anchor);
return usb_submit_urb(urb, GFP_KERNEL);
}
static void vmk80xx_build_int_urb(struct urb *urb, int flag)
{
struct vmk80xx_usb *dev = urb->context;
__u8 rx_addr, tx_addr;
unsigned int pipe;
unsigned char *buf;
size_t size;
void (*callback)(struct urb *);
int ival;
dbgvm("vmk80xx: %s\n", __func__);
if (flag & URB_RCV_FLAG) {
rx_addr = dev->ep_rx->bEndpointAddress;
pipe = usb_rcvintpipe(dev->udev, rx_addr);
buf = dev->usb_rx_buf;
size = le16_to_cpu(dev->ep_rx->wMaxPacketSize);
callback = vmk80xx_rx_callback;
ival = dev->ep_rx->bInterval;
} else { /* URB_SND_FLAG */
tx_addr = dev->ep_tx->bEndpointAddress;
pipe = usb_sndintpipe(dev->udev, tx_addr);
buf = dev->usb_tx_buf;
size = le16_to_cpu(dev->ep_tx->wMaxPacketSize);
callback = vmk80xx_tx_callback;
ival = dev->ep_tx->bInterval;
}
udev = interface_to_usbdev(vm->intf);
usb_fill_int_urb(urb, dev->udev, pipe, buf,
size, callback, dev, ival);
}
/* Fill the urb and send off */
usb_fill_int_urb(vm->irq_in_urb,
udev,
usb_rcvintpipe(udev, vm->irq_in_endpoint),
vm->irq_in_buf,
vm->irq_in_endpoint_size,
vm_irq_in_callback,
vm,
vm->irq_in_interval);
static void vmk80xx_do_bulk_msg(struct vmk80xx_usb *dev)
{
__u8 tx_addr, rx_addr;
unsigned int tx_pipe, rx_pipe;
size_t size;
vm->irq_in_running = 1;
vm->irq_in_busy = 1; /* disallow following read request's */
dbgvm("vmk80xx: %s\n", __func__);
retval = usb_submit_urb(vm->irq_in_urb, GFP_KERNEL);
if (!retval) goto exit; /* success */
/* FALL TROUGH */
vm->irq_in_running = 0;
DBGCM("comedi#: vmk80xx: %s - submit urb failed (err# %d)\n",
__func__, retval);
set_bit(TRANS_IN_BUSY, &dev->flags);
set_bit(TRANS_OUT_BUSY, &dev->flags);
exit:
return retval;
tx_addr = dev->ep_tx->bEndpointAddress;
rx_addr = dev->ep_rx->bEndpointAddress;
tx_pipe = usb_sndbulkpipe(dev->udev, tx_addr);
rx_pipe = usb_rcvbulkpipe(dev->udev, rx_addr);
/* The max packet size attributes of the K8061
* input/output endpoints are identical */
size = le16_to_cpu(dev->ep_tx->wMaxPacketSize);
usb_bulk_msg(dev->udev, tx_pipe, dev->usb_tx_buf,
size, NULL, dev->ep_tx->bInterval);
usb_bulk_msg(dev->udev, rx_pipe, dev->usb_rx_buf,
size, NULL, HZ * 10);
clear_bit(TRANS_OUT_BUSY, &dev->flags);
clear_bit(TRANS_IN_BUSY, &dev->flags);
}
static int vm_write(struct vmk80xx_usb *vm, unsigned char cmd)
static int vmk80xx_read_packet(struct vmk80xx_usb *dev)
{
struct usb_device *udev;
int retval = -ENODEV;
struct urb *urb;
int retval;
DBGVM("comedi#: vmk80xx: %s\n", __func__);
dbgvm("vmk80xx: %s\n", __func__);
/* Verify that the device wasn't un-plugged */
if (!vm->intf) {
DBGCM("comedi#: vmk80xx: %s - No dev or dev un-plugged\n",
__func__);
goto exit;
}
if (!dev->intf)
return -ENODEV;
if (vm->irq_out_busy) {
retval = wait_event_interruptible(vm->write_wait,
!vm->irq_out_busy);
if (retval < 0) { /* we were interrupted by a signal */
retval = -ERESTART;
goto exit;
}
/* Only useful for interrupt transfers */
if (test_bit(TRANS_IN_BUSY, &dev->flags))
if (wait_event_interruptible(dev->read_wait,
!test_bit(TRANS_IN_BUSY, &dev->flags)))
return -ERESTART;
if (dev->board.model == VMK8061_MODEL) {
vmk80xx_do_bulk_msg(dev);
return 0;
}
udev = interface_to_usbdev(vm->intf);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
/* Set the command which should send to the device */
vm->irq_out_buf[0] = cmd;
urb->context = dev;
vmk80xx_build_int_urb(urb, URB_RCV_FLAG);
/* Fill the urb and send off */
usb_fill_int_urb(vm->irq_out_urb,
udev,
usb_sndintpipe(udev, vm->irq_out_endpoint),
vm->irq_out_buf,
vm->irq_out_endpoint_size,
vm_irq_out_callback,
vm,
vm->irq_out_interval);
set_bit(TRANS_IN_RUNNING, &dev->flags);
set_bit(TRANS_IN_BUSY, &dev->flags);
vm->irq_out_busy = 1; /* disallow following write request's */
usb_anchor_urb(urb, &dev->rx_anchor);
wmb();
retval = usb_submit_urb(urb, GFP_KERNEL);
if (!retval)
goto exit;
retval = usb_submit_urb(vm->irq_out_urb, GFP_KERNEL);
if (!retval) goto exit; /* success */
/* FALL THROUGH */
vm->irq_out_busy = 0;
DBGCM("comedi#: vmk80xx: %s - submit urb failed (err# %d)\n",
__func__, retval);
clear_bit(TRANS_IN_RUNNING, &dev->flags);
usb_unanchor_urb(urb);
exit:
usb_free_urb(urb);
return retval;
}
/* ---------------------------------------------------------------------------
* COMEDI-Interface (callback functions for the userspacs apps).
--------------------------------------------------------------------------- */
static int vm_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
static int vmk80xx_write_packet(struct vmk80xx_usb *dev, int cmd)
{
struct vmk80xx_usb *vm;
int minor = dev->minor;
int ch, ch_offs, i;
int retval = -EFAULT;
struct urb *urb;
int retval;
DBGVM("comedi%d: vmk80xx: %s\n", minor, __func__);
dbgvm("vmk80xx: %s\n", __func__);
if (!(vm = (struct vmk80xx_usb *)dev->private))
return retval;
if (!dev->intf)
return -ENODEV;
down(&vm->limit_sem);
if (test_bit(TRANS_OUT_BUSY, &dev->flags))
if (wait_event_interruptible(dev->write_wait,
!test_bit(TRANS_OUT_BUSY, &dev->flags)))
return -ERESTART;
/* We have an attached board ? */
if (!vm->probed) {
retval = -ENODEV;
goto error;
}
if (dev->board.model == VMK8061_MODEL) {
dev->usb_tx_buf[0] = cmd;
vmk80xx_do_bulk_msg(dev);
/* interrupt-in pipe busy ? */
if (vm->irq_in_busy) {
retval = -EBUSY;
goto error;
return 0;
}
ch = CR_CHAN(insn->chanspec);
ch_offs = (!ch) ? VMK8055_AO1 : VMK8055_AO2;
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
for (i = 0; i < insn->n; i++) {
retval = vm_read(vm);
if (retval)
goto error;
urb->context = dev;
vmk80xx_build_int_urb(urb, URB_SND_FLAG);
/* NOTE:
* The input voltage of the selected 8-bit AD channel
* is converted to a value which lies between
* 0 and 255.
*/
data[i] = vm->irq_in_buf[ch_offs];
}
set_bit(TRANS_OUT_BUSY, &dev->flags);
up(&vm->limit_sem);
usb_anchor_urb(urb, &dev->tx_anchor);
/* Return the number of samples read */
return i;
error:
up(&vm->limit_sem);
dev->usb_tx_buf[0] = cmd;
retval = usb_submit_urb(urb, GFP_KERNEL);
if (!retval)
goto exit;
clear_bit(TRANS_OUT_BUSY, &dev->flags);
usb_unanchor_urb(urb);
exit:
usb_free_urb(urb);
return retval;
}
static int vm_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
#define DIR_IN 1
#define DIR_OUT 2
#define rudimentary_check(dir) \
do { \
if (!dev) \
return -EFAULT; \
if (!dev->probed) \
return -ENODEV; \
if (!dev->attached) \
return -ENODEV; \
if ((dir) & DIR_IN) { \
if (test_bit(TRANS_IN_BUSY, &dev->flags)) \
return -EBUSY; \
} else { /* DIR_OUT */ \
if (test_bit(TRANS_OUT_BUSY, &dev->flags)) \
return -EBUSY; \
} \
} while (0)
static int vmk80xx_ai_rinsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct vmk80xx_usb *vm;
int minor = dev->minor;
int ch, ch_offs, i;
int retval = -EFAULT;
struct vmk80xx_usb *dev = cdev->private;
int chan, reg[2];
int n;
DBGVM("comedi%d: vmk80xx: %s\n", minor, __func__);
dbgvm("vmk80xx: %s\n", __func__);
if (!(vm = (struct vmk80xx_usb *)dev->private))
return retval;
rudimentary_check(DIR_IN);
down(&vm->limit_sem);
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
/* We have an attached board ? */
if (!vm->probed) {
retval = -ENODEV;
goto error;
switch (dev->board.model) {
case VMK8055_MODEL:
if (!chan)
reg[0] = VMK8055_AI1_REG;
else
reg[0] = VMK8055_AI2_REG;
break;
case VMK8061_MODEL:
reg[0] = VMK8061_AI_REG1;
reg[1] = VMK8061_AI_REG2;
dev->usb_tx_buf[0] = VMK8061_CMD_RD_AI;
dev->usb_tx_buf[VMK8061_CH_REG] = chan;
break;
}
/* interrupt-out pipe busy ? */
if (vm->irq_out_busy) {
retval = -EBUSY;
goto error;
for (n = 0; n < insn->n; n++) {
if (vmk80xx_read_packet(dev))
break;
if (dev->board.model == VMK8055_MODEL) {
data[n] = dev->usb_rx_buf[reg[0]];
continue;
}
ch = CR_CHAN(insn->chanspec);
ch_offs = (!ch) ? VMK8055_AO1 : VMK8055_AO2;
/* VMK8061_MODEL */
data[n] = dev->usb_rx_buf[reg[0]] + 256 *
dev->usb_rx_buf[reg[1]];
}
for (i = 0; i < insn->n; i++) {
/* NOTE:
* The indicated 8-bit DA channel is altered according
* to the new data. This means that the data corresponds
* to a specific voltage. The value 0 corresponds to a
* minimum output voltage (+-0 Volt) and the value 255
* corresponds to a maximum output voltage (+5 Volt).
*/
vm->irq_out_buf[ch_offs] = data[i];
up(&dev->limit_sem);
retval = vm_write(vm, VMK8055_CMD_AD);
if (retval)
goto error;
return n;
}
static int vmk80xx_ao_winsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct vmk80xx_usb *dev = cdev->private;
int chan, cmd, reg;
int n;
dbgvm("vmk80xx: %s\n", __func__);
rudimentary_check(DIR_OUT);
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
switch (dev->board.model) {
case VMK8055_MODEL:
cmd = VMK8055_CMD_WRT_AD;
if (!chan)
reg = VMK8055_AO1_REG;
else
reg = VMK8055_AO2_REG;
break;
default: /* NOTE: avoid compiler warnings */
cmd = VMK8061_CMD_SET_AO;
reg = VMK8061_AO_REG;
dev->usb_tx_buf[VMK8061_CH_REG] = chan;
break;
}
up(&vm->limit_sem);
for (n = 0; n < insn->n; n++) {
dev->usb_tx_buf[reg] = data[n];
/* Return the number of samples write */
return i;
error:
up(&vm->limit_sem);
if (vmk80xx_write_packet(dev, cmd))
break;
}
return retval;
up(&dev->limit_sem);
return n;
}
static int vm_di_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
static int vmk80xx_ao_rinsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct vmk80xx_usb *vm;
int minor = dev->minor;
int ch, i, inp;
int retval = -EFAULT;
struct vmk80xx_usb *dev = cdev->private;
int chan, reg;
int n;
DBGVM("comedi%d: vmk80xx: %s\n", minor, __func__);
dbgvm("vmk80xx: %s\n", __func__);
if (!(vm = (struct vmk80xx_usb *)dev->private))
return retval;
rudimentary_check(DIR_IN);
down(&vm->limit_sem);
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
/* We have an attached board ? */
if (!vm->probed) {
retval = -ENODEV;
goto error;
}
reg = VMK8061_AO_REG - 1;
/* interrupt-in pipe busy ? */
if (vm->irq_in_busy) {
retval = -EBUSY;
goto error;
}
dev->usb_tx_buf[0] = VMK8061_CMD_RD_AO;
for (i = 0, ch = CR_CHAN(insn->chanspec); i < insn->n; i++) {
retval = vm_read(vm);
if (retval)
goto error;
for (n = 0; n < insn->n; n++) {
if (vmk80xx_read_packet(dev))
break;
/* NOTE:
* The status of the selected digital input channel is read.
*/
inp = (((vm->irq_in_buf[VMK8055_DI] >> 4) & 0x03) |
((vm->irq_in_buf[VMK8055_DI] << 2) & 0x04) |
((vm->irq_in_buf[VMK8055_DI] >> 3) & 0x18));
data[i] = ((inp & (1 << ch)) > 0);
data[n] = dev->usb_rx_buf[reg+chan];
}
up(&vm->limit_sem);
up(&dev->limit_sem);
return i;
error:
up(&vm->limit_sem);
return retval;
return n;
}
static int vm_do_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
static int vmk80xx_di_rinsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct vmk80xx_usb *vm;
int minor = dev->minor;
int ch, i, mask;
int retval = -EFAULT;
struct vmk80xx_usb *dev = cdev->private;
int chan;
unsigned char *rx_buf;
int reg, inp;
int n;
DBGVM("comedi%d: vmk80xx: %s\n", minor, __func__);
dbgvm("vmk80xx: %s\n", __func__);
if (!(vm = (struct vmk80xx_usb *)dev->private))
return retval;
rudimentary_check(DIR_IN);
down(&vm->limit_sem);
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
/* We have an attached board ? */
if (!vm->probed) {
retval = -ENODEV;
goto error;
}
rx_buf = dev->usb_rx_buf;
/* interrupt-out pipe busy ? */
if (vm->irq_out_busy) {
retval = -EBUSY;
goto error;
}
if (dev->board.model == VMK8061_MODEL) {
reg = VMK8061_DI_REG;
dev->usb_tx_buf[0] = VMK8061_CMD_RD_DI;
} else
reg = VMK8055_DI_REG;
for (i = 0, ch = CR_CHAN(insn->chanspec); i < insn->n; i++) {
/* NOTE:
* The selected digital output channel is set or cleared.
*/
mask = (data[i] == 1)
? vm->irq_out_buf[VMK8055_DO] | (1 << ch)
: vm->irq_out_buf[VMK8055_DO] ^ (1 << ch);
for (n = 0; n < insn->n; n++) {
if (vmk80xx_read_packet(dev))
break;
vm->irq_out_buf[VMK8055_DO] = mask;
if (dev->board.model == VMK8055_MODEL)
inp = (((rx_buf[reg] >> 4) & 0x03) |
((rx_buf[reg] << 2) & 0x04) |
((rx_buf[reg] >> 3) & 0x18));
else
inp = rx_buf[reg];
retval = vm_write(vm, VMK8055_CMD_AD);
if (retval)
goto error;
data[n] = ((inp & (1 << chan)) > 0);
}
up(&vm->limit_sem);
up(&dev->limit_sem);
return i;
error:
up(&vm->limit_sem);
return retval;
return n;
}
static int vm_cnt_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
static int vmk80xx_do_winsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct vmk80xx_usb *vm;
int minor = dev->minor;
int cnt, cnt_offs, i;
int retval = -EFAULT;
DBGVM("comedi%d: vmk80xx: %s\n", minor, __func__);
struct vmk80xx_usb *dev = cdev->private;
int chan;
unsigned char *tx_buf;
int reg, cmd;
int n;
if (!(vm = (struct vmk80xx_usb *)dev->private))
return retval;
dbgvm("vmk80xx: %s\n", __func__);
down(&vm->limit_sem);
rudimentary_check(DIR_OUT);
/* We have an attached board ? */
if (!vm->probed) {
retval = -ENODEV;
goto error;
}
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
/* interrupt-in pipe busy ? */
if (vm->irq_in_busy) {
retval = -EBUSY;
goto error;
}
tx_buf = dev->usb_tx_buf;
cnt = CR_CHAN(insn->chanspec);
cnt_offs = (!cnt) ? VMK8055_CNT1 : VMK8055_CNT2;
for (n = 0; n < insn->n; n++) {
if (dev->board.model == VMK8055_MODEL) {
reg = VMK8055_DO_REG;
cmd = VMK8055_CMD_WRT_AD;
if (data[n] == 1)
tx_buf[reg] |= (1 << chan);
else
tx_buf[reg] ^= (1 << chan);
for (i = 0; i < insn->n; i++) {
retval = vm_read(vm);
if (retval)
goto error;
goto write_packet;
}
/* NOTE:
* The status of the selected 16-bit pulse counter is
* read. The counter # 1 counts the pulses fed to the
* input Inp1 and the counter # 2 counts the pulses fed
* to the input Inp2.
*/
data[i] = vm->irq_in_buf[cnt_offs];
/* VMK8061_MODEL */
reg = VMK8061_DO_REG;
if (data[n] == 1) {
cmd = VMK8061_CMD_SET_DO;
tx_buf[reg] = 1 << chan;
} else {
cmd = VMK8061_CMD_CLR_DO;
tx_buf[reg] = 0xff - (1 << chan);
}
up(&vm->limit_sem);
write_packet:
if (vmk80xx_write_packet(dev, cmd))
break;
}
return i;
error:
up(&vm->limit_sem);
up(&dev->limit_sem);
return retval;
return n;
}
static int vm_cnt_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
static int vmk80xx_do_rinsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct vmk80xx_usb *vm;
int minor = dev->minor;
int cnt, cnt_offs, cmd, i;
int retval = -EFAULT;
struct vmk80xx_usb *dev = cdev->private;
int chan, reg, mask;
int n;
DBGVM("comedi%d: vmk80xx: %s\n", minor, __func__);
dbgvm("vmk80xx: %s\n", __func__);
if (!(vm = (struct vmk80xx_usb *)dev->private))
return retval;
rudimentary_check(DIR_IN);
down(&vm->limit_sem);
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
/* We have an attached board ? */
if (!vm->probed) {
retval = -ENODEV;
goto error;
}
reg = VMK8061_DO_REG;
mask = 1 << chan;
/* interrupt-out pipe busy ? */
if (vm->irq_out_busy) {
retval = -EBUSY;
goto error;
dev->usb_tx_buf[0] = VMK8061_CMD_RD_DO;
for (n = 0; n < insn->n; n++) {
if (vmk80xx_read_packet(dev))
break;
data[n] = (dev->usb_rx_buf[reg] & mask) >> chan;
}
cnt = CR_CHAN(insn->chanspec);
cnt_offs = (!cnt) ? VMK8055_CNT1 : VMK8055_CNT2;
cmd = (!cnt) ? VMK8055_CMD_RST_CNT1 : VMK8055_CMD_RST_CNT2;
up(&dev->limit_sem);
for (i = 0; i < insn->n; i++) {
/* NOTE:
* The selected 16-bit pulse counter is reset.
*/
vm->irq_out_buf[cnt_offs] = 0x00;
return n;
}
retval = vm_write(vm, cmd);
if (retval)
goto error;
static int vmk80xx_cnt_rinsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct vmk80xx_usb *dev = cdev->private;
int chan, reg[2];
int n;
dbgvm("vmk80xx: %s\n", __func__);
rudimentary_check(DIR_IN);
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
switch (dev->board.model) {
case VMK8055_MODEL:
if (!chan)
reg[0] = VMK8055_CNT1_REG;
else
reg[0] = VMK8055_CNT2_REG;
break;
case VMK8061_MODEL:
reg[0] = VMK8061_CNT_REG;
reg[1] = VMK8061_CNT_REG;
dev->usb_tx_buf[0] = VMK8061_CMD_RD_CNT;
break;
}
up(&vm->limit_sem);
for (n = 0; n < insn->n; n++) {
if (vmk80xx_read_packet(dev))
break;
if (dev->board.model == VMK8055_MODEL) {
data[n] = dev->usb_rx_buf[reg[0]];
continue;
}
return i;
error:
up(&vm->limit_sem);
/* VMK8061_MODEL */
data[n] = dev->usb_rx_buf[reg[0]*(chan+1)+1]
+ 256 * dev->usb_rx_buf[reg[1]*2+2];
}
return retval;
up(&dev->limit_sem);
return n;
}
static int vm_cnt_cinsn(struct comedi_device *dev, struct comedi_subdevice *s,
static int vmk80xx_cnt_cinsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct vmk80xx_usb *vm;
int minor = dev->minor;
int cnt, cmd, i;
unsigned int debtime, val;
int retval = -EFAULT;
struct vmk80xx_usb *dev = cdev->private;
unsigned int insn_cmd;
int chan, cmd, reg;
int n;
DBGVM("comedi%d: vmk80xx: %s\n", minor, __func__);
dbgvm("vmk80xx: %s\n", __func__);
if (!(vm = (struct vmk80xx_usb *)dev->private))
return retval;
rudimentary_check(DIR_OUT);
down(&vm->limit_sem);
down(&dev->limit_sem);
/* We have an attached board ? */
if (!vm->probed) {
retval = -ENODEV;
goto error;
}
insn_cmd = data[0];
if (insn_cmd != INSN_CONFIG_RESET && insn_cmd != GPCT_RESET)
return -EINVAL;
/* interrupt-out pipe busy ? */
if (vm->irq_out_busy) {
retval = -EBUSY;
goto error;
chan = CR_CHAN(insn->chanspec);
if (dev->board.model == VMK8055_MODEL) {
if (!chan) {
cmd = VMK8055_CMD_RST_CNT1;
reg = VMK8055_CNT1_REG;
} else {
cmd = VMK8055_CMD_RST_CNT2;
reg = VMK8055_CNT2_REG;
}
cnt = CR_CHAN(insn->chanspec);
cmd = (!cnt) ? VMK8055_CMD_DEB1 : VMK8055_CMD_DEB2;
/* NOTE:
* The counter inputs are debounced in the software to prevent
* false triggering when mechanical switches or relay inputs
* are used. The debounce time is equal for both falling and
* rising edges. The default debounce time is 2ms. This means
* the counter input must be stable for at least 2ms before it
* is recognised , giving the maximum count rate of about 200
* counts per second. If the debounce time is set to 0, then
* the maximum counting rate is about 2000 counts per second.
*/
for (i = 0; i < insn->n; i++) {
debtime = data[i];
dev->usb_tx_buf[reg] = 0x00;
} else
cmd = VMK8061_CMD_RST_CNT;
for (n = 0; n < insn->n; n++)
if (vmk80xx_write_packet(dev, cmd))
break;
up(&dev->limit_sem);
return n;
}
static int vmk80xx_cnt_winsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct vmk80xx_usb *dev = cdev->private;
unsigned long debtime, val;
int chan, cmd;
int n;
dbgvm("vmk80xx: %s\n", __func__);
rudimentary_check(DIR_OUT);
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
if (!chan)
cmd = VMK8055_CMD_DEB1_TIME;
else
cmd = VMK8055_CMD_DEB2_TIME;
for (n = 0; n < insn->n; n++) {
debtime = data[n];
if (debtime == 0)
debtime = 1;
/* --------------------------------------------------
* From libk8055.c
* ---------------
* Copyleft (C) 2005 by Sven Lindberg;
* Copyright (C) 2007 by Pjetur G. Hjaltason:
* By testing and measuring on the other hand I found
* the formula dbt=0.115*x^2.........
*
* I'm using here an adapted formula to avoid floating
* point operations inside the kernel. The time set
* with this formula is within +-4% +- 1.
* ------------------------------------------------ */
/* TODO: Prevent overflows */
if (debtime > 7450)
debtime = 7450;
val = int_sqrt(debtime * 1000 / 115);
if (((val + 1) * val) < debtime * 1000 / 115)
val += 1;
vm->irq_out_buf[cnt+6] = val;
dev->usb_tx_buf[6+chan] = val;
retval = vm_write(vm, cmd);
if (retval)
goto error;
if (vmk80xx_write_packet(dev, cmd))
break;
}
up(&vm->limit_sem);
return i;
error:
up(&vm->limit_sem);
up(&dev->limit_sem);
return retval;
return n;
}
/* Comedi subdevice offsets */
#define VMK8055_SUBD_AI_OFFSET 0
#define VMK8055_SUBD_AO_OFFSET 1
#define VMK8055_SUBD_DI_OFFSET 2
#define VMK8055_SUBD_DO_OFFSET 3
#define VMK8055_SUBD_CT_OFFSET 4
static int vmk80xx_pwm_rinsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct vmk80xx_usb *dev = cdev->private;
int reg[2];
int n;
static DEFINE_MUTEX(glb_mutex);
dbgvm("vmk80xx: %s\n", __func__);
rudimentary_check(DIR_IN);
down(&dev->limit_sem);
reg[0] = VMK8061_PWM_REG1;
reg[1] = VMK8061_PWM_REG2;
dev->usb_tx_buf[0] = VMK8061_CMD_RD_PWM;
for (n = 0; n < insn->n; n++) {
if (vmk80xx_read_packet(dev))
break;
/* ---------------------------------------------------------------------------
* Hook-up (or deallocate) the virtual device file '/dev/comedi[minor]' with
* the vmk80xx driver (comedi_config/rmmod).
--------------------------------------------------------------------------- */
static int vm_attach(struct comedi_device *dev, struct comedi_devconfig *it)
data[n] = dev->usb_rx_buf[reg[0]] + 4 *
dev->usb_rx_buf[reg[1]];
}
up(&dev->limit_sem);
return n;
}
static int vmk80xx_pwm_winsn(struct comedi_device *cdev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
struct comedi_subdevice *s;
int minor = dev->minor;
int idx, i;
struct vmk80xx_usb *dev = cdev->private;
unsigned char *tx_buf;
int reg[2], cmd;
int n;
DBGVM("comedi%d: vmk80xx: %s\n", minor, __func__);
dbgvm("vmk80xx: %s\n", __func__);
mutex_lock(&glb_mutex);
rudimentary_check(DIR_OUT);
down(&dev->limit_sem);
/* Prepare user info... */
printk("comedi%d: vmk80xx: ", minor);
tx_buf = dev->usb_tx_buf;
idx = -1;
reg[0] = VMK8061_PWM_REG1;
reg[1] = VMK8061_PWM_REG2;
/* Find the last valid device which has been detected
* by the probe function */;
for (i = 0; i < VMK8055_MAX_BOARDS; i++)
if (vm_boards[i].probed && !vm_boards[i].attached) {
idx = i;
cmd = VMK8061_CMD_OUT_PWM;
/*
* The followin piece of code was translated from the inline
* assembler code in the DLL source code.
*
* asm
* mov eax, k ; k is the value (data[n])
* and al, 03h ; al are the lower 8 bits of eax
* mov lo, al ; lo is the low part (tx_buf[reg[0]])
* mov eax, k
* shr eax, 2 ; right shift eax register by 2
* mov hi, al ; hi is the high part (tx_buf[reg[1]])
* end;
*/
for (n = 0; n < insn->n; n++) {
tx_buf[reg[0]] = (unsigned char)(data[n] & 0x03);
tx_buf[reg[1]] = (unsigned char)(data[n] >> 2) & 0xff;
if (vmk80xx_write_packet(dev, cmd))
break;
}
if (idx == -1) {
printk("no boards attached\n");
up(&dev->limit_sem);
return n;
}
static int
vmk80xx_attach(struct comedi_device *cdev, struct comedi_devconfig *it)
{
int i;
struct vmk80xx_usb *dev;
int n_subd;
struct comedi_subdevice *s;
int minor;
dbgvm("vmk80xx: %s\n", __func__);
mutex_lock(&glb_mutex);
for (i = 0; i < VMK80XX_MAX_BOARDS; i++)
if (vmb[i].probed && !vmb[i].attached)
break;
if (i == VMK80XX_MAX_BOARDS) {
mutex_unlock(&glb_mutex);
return -ENODEV;
}
down(&vm_boards[idx].limit_sem);
dev = &vmb[i];
/* OK, at that time we've an attached board and this is
* the first execution of the comedi_config command for
* this board */
printk("board #%d is attached to comedi\n", vm_boards[idx].id);
down(&dev->limit_sem);
dev->board_name = "vmk80xx";
dev->private = vm_boards + idx; /* will be allocated in vm_probe */
cdev->board_name = dev->board.name;
cdev->private = dev;
/* Subdevices section -> set properties */
if (alloc_subdevices(dev, 5) < 0) {
printk("comedi%d: vmk80xx: couldn't allocate subdevs\n",
minor);
up(&vm_boards[idx].limit_sem);
if (dev->board.model == VMK8055_MODEL)
n_subd = 5;
else
n_subd = 6;
if (alloc_subdevices(cdev, n_subd) < 0) {
up(&dev->limit_sem);
mutex_unlock(&glb_mutex);
return -ENOMEM;
}
s = dev->subdevices + VMK8055_SUBD_AI_OFFSET;
/* Analog input subdevice */
s = cdev->subdevices + VMK80XX_SUBD_AI;
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_GROUND;
s->n_chan = 2;
s->maxdata = 0xff; /* +5 Volt */
s->range_table = &range_unipolar5; /* +-0 Volt - +5 Volt */
s->insn_read = vm_ai_rinsn;
s->n_chan = dev->board.ai_chans;
s->maxdata = (1 << dev->board.ai_bits) - 1;
s->range_table = dev->board.range;
s->insn_read = vmk80xx_ai_rinsn;
s = dev->subdevices + VMK8055_SUBD_AO_OFFSET;
/* Analog output subdevice */
s = cdev->subdevices + VMK80XX_SUBD_AO;
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
s->n_chan = 2;
s->maxdata = 0xff;
s->range_table = &range_unipolar5;
s->insn_write = vm_ao_winsn;
s->n_chan = dev->board.ao_chans;
s->maxdata = (1 << dev->board.ao_bits) - 1;
s->range_table = dev->board.range;
s->insn_write = vmk80xx_ao_winsn;
if (dev->board.model == VMK8061_MODEL) {
s->subdev_flags |= SDF_READABLE;
s->insn_read = vmk80xx_ao_rinsn;
}
s = dev->subdevices + VMK8055_SUBD_DI_OFFSET;
/* Digital input subdevice */
s = cdev->subdevices + VMK80XX_SUBD_DI;
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE | SDF_GROUND;
s->n_chan = 5;
s->insn_read = vm_di_rinsn;
s->n_chan = dev->board.di_chans;
s->maxdata = (1 << dev->board.di_bits) - 1;
s->insn_read = vmk80xx_di_rinsn;
s = dev->subdevices + VMK8055_SUBD_DO_OFFSET;
/* Digital output subdevice */
s = cdev->subdevices + VMK80XX_SUBD_DO;
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
s->n_chan = 8;
s->maxdata = 1;
s->insn_write = vm_do_winsn;
s->n_chan = dev->board.do_chans;
s->maxdata = (1 << dev->board.do_bits) - 1;
s->insn_write = vmk80xx_do_winsn;
if (dev->board.model == VMK8061_MODEL) {
s->subdev_flags |= SDF_READABLE;
s->insn_read = vmk80xx_do_rinsn;
}
s = dev->subdevices + VMK8055_SUBD_CT_OFFSET;
/* Counter subdevice */
s = cdev->subdevices + VMK80XX_SUBD_CNT;
s->type = COMEDI_SUBD_COUNTER;
s->subdev_flags = SDF_READABLE;
s->n_chan = dev->board.cnt_chans;
s->insn_read = vmk80xx_cnt_rinsn;
s->insn_config = vmk80xx_cnt_cinsn;
if (dev->board.model == VMK8055_MODEL) {
s->subdev_flags |= SDF_WRITEABLE;
s->maxdata = (1 << dev->board.cnt_bits) - 1;
s->insn_write = vmk80xx_cnt_winsn;
}
/* PWM subdevice */
if (dev->board.model == VMK8061_MODEL) {
s = cdev->subdevices + VMK80XX_SUBD_PWM;
s->type = COMEDI_SUBD_PWM;
s->subdev_flags = SDF_READABLE | SDF_WRITEABLE;
s->n_chan = 2;
s->insn_read = vm_cnt_rinsn;
s->insn_write = vm_cnt_winsn; /* accept only a channel # as arg */
s->insn_config = vm_cnt_cinsn;
s->n_chan = dev->board.pwm_chans;
s->maxdata = (1 << dev->board.pwm_bits) - 1;
s->insn_read = vmk80xx_pwm_rinsn;
s->insn_write = vmk80xx_pwm_winsn;
}
dev->attached = 1;
/* Register the comedi board connection */
vm_boards[idx].attached = 1;
minor = cdev->minor;
up(&vm_boards[idx].limit_sem);
printk(KERN_INFO
"comedi%d: vmk80xx: board #%d [%s] attached to comedi\n",
minor, dev->count, dev->board.name);
up(&dev->limit_sem);
mutex_unlock(&glb_mutex);
return 0;
}
static int vm_detach(struct comedi_device *dev)
static int vmk80xx_detach(struct comedi_device *cdev)
{
struct vmk80xx_usb *vm;
int minor = dev->minor;
struct vmk80xx_usb *dev;
int minor;
DBGVM("comedi%d: vmk80xx: %s\n", minor, __func__);
dbgvm("vmk80xx: %s\n", __func__);
if (!dev) { /* FIXME: I don't know if i need that here */
printk("comedi%d: vmk80xx: %s - dev is NULL\n",
minor, __func__);
if (!cdev)
return -EFAULT;
}
if (!(vm = (struct vmk80xx_usb *)dev->private)) {
printk("comedi%d: vmk80xx: %s - dev->private is NULL\n",
minor, __func__);
dev = cdev->private;
if (!dev)
return -EFAULT;
}
/* NOTE: dev->private and dev->subdevices are deallocated
* automatically by the comedi core */
down(&dev->limit_sem);
down(&vm->limit_sem);
cdev->private = NULL;
dev->attached = 0;
dev->private = NULL;
vm->attached = 0;
minor = cdev->minor;
printk("comedi%d: vmk80xx: board #%d removed from comedi core\n",
minor, vm->id);
printk(KERN_INFO
"comedi%d: vmk80xx: board #%d [%s] detached from comedi\n",
minor, dev->count, dev->board.name);
up(&vm->limit_sem);
up(&dev->limit_sem);
return 0;
}
/* ---------------------------------------------------------------------------
* Hook-up or remove the Velleman board from the usb.
--------------------------------------------------------------------------- */
static int vm_probe(struct usb_interface *itf, const struct usb_device_id *id)
static int
vmk80xx_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev;
int idx, i;
u16 product_id;
int retval = -ENOMEM;
int i;
struct vmk80xx_usb *dev;
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *ep_desc;
size_t size;
DBGVM("comedi#: vmk80xx: %s\n", __func__);
dbgvm("vmk80xx: %s\n", __func__);
mutex_lock(&glb_mutex);
udev = interface_to_usbdev(itf);
idx = -1;
/* TODO: k8061 only theoretically supported yet */
product_id = le16_to_cpu(udev->descriptor.idProduct);
if (product_id == 0x8061) {
printk("comedi#: vmk80xx: Velleman K8061 detected "
"(no COMEDI support available yet)\n");
mutex_unlock(&glb_mutex);
return -ENODEV;
}
/* Look for a free place to put the board into the array */
for (i = 0; i < VMK8055_MAX_BOARDS; i++) {
if (!vm_boards[i].probed) {
idx = i;
i = VMK8055_MAX_BOARDS;
}
}
for (i = 0; i < VMK80XX_MAX_BOARDS; i++)
if (!vmb[i].probed)
break;
if (idx == -1) {
printk("comedi#: vmk80xx: only FOUR boards supported\n");
if (i == VMK80XX_MAX_BOARDS) {
mutex_unlock(&glb_mutex);
return -EMFILE;
}
/* Initialize device states (hard coded) */
vm_boards[idx].intf = itf;
dev = &vmb[i];
/* interrupt-in context */
vm_boards[idx].irq_in_endpoint = VMK8055_EP_IN;
vm_boards[idx].irq_in_interval = VMK8055_EP_INTERVAL;
vm_boards[idx].irq_in_endpoint_size = VMK8055_EP_SIZE;
vm_boards[idx].irq_in_buf = kmalloc(VMK8055_EP_SIZE, GFP_KERNEL);
if (!vm_boards[idx].irq_in_buf) {
err("comedi#: vmk80xx: couldn't alloc irq_in_buf\n");
goto error;
}
memset(dev, 0x00, sizeof(struct vmk80xx_usb));
dev->count = i;
/* interrupt-out context */
vm_boards[idx].irq_out_endpoint = VMK8055_EP_OUT;
vm_boards[idx].irq_out_interval = VMK8055_EP_INTERVAL;
vm_boards[idx].irq_out_endpoint_size = VMK8055_EP_SIZE;
vm_boards[idx].irq_out_buf = kmalloc(VMK8055_EP_SIZE, GFP_KERNEL);
if (!vm_boards[idx].irq_out_buf) {
err("comedi#: vmk80xx: couldn't alloc irq_out_buf\n");
iface_desc = intf->cur_altsetting;
if (iface_desc->desc.bNumEndpoints != 2)
goto error;
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
ep_desc = &iface_desc->endpoint[i].desc;
if (usb_endpoint_is_int_in(ep_desc)) {
dev->ep_rx = ep_desc;
continue;
}
/* Endpoints located ? */
if (!vm_boards[idx].irq_in_endpoint) {
err("comedi#: vmk80xx: int-in endpoint not found\n");
goto error;
if (usb_endpoint_is_int_out(ep_desc)) {
dev->ep_tx = ep_desc;
continue;
}
if (!vm_boards[idx].irq_out_endpoint) {
err("comedi#: vmk80xx: int-out endpoint not found\n");
goto error;
if (usb_endpoint_is_bulk_in(ep_desc)) {
dev->ep_rx = ep_desc;
continue;
}
/* Try to allocate in/out urbs */
vm_boards[idx].irq_in_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!vm_boards[idx].irq_in_urb) {
err("comedi#: vmk80xx: couldn't alloc irq_in_urb\n");
goto error;
if (usb_endpoint_is_bulk_out(ep_desc)) {
dev->ep_tx = ep_desc;
continue;
}
}
vm_boards[idx].irq_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!vm_boards[idx].irq_out_urb) {
err("comedi#: vmk80xx: couldn't alloc irq_out_urb\n");
if (!dev->ep_rx || !dev->ep_tx)
goto error;
}
/* Reset the device */
vm_boards[idx].irq_out_buf[0] = VMK8055_CMD_RST;
vm_boards[idx].irq_out_buf[1] = 0x00;
vm_boards[idx].irq_out_buf[2] = 0x00;
vm_boards[idx].irq_out_buf[3] = 0x00;
vm_boards[idx].irq_out_buf[4] = 0x00;
vm_boards[idx].irq_out_buf[5] = 0x00;
vm_boards[idx].irq_out_buf[6] = 0x00;
vm_boards[idx].irq_out_buf[7] = 0x00;
usb_fill_int_urb(vm_boards[idx].irq_out_urb,
udev,
usb_sndintpipe(udev,
vm_boards[idx].irq_out_endpoint),
vm_boards[idx].irq_out_buf,
vm_boards[idx].irq_out_endpoint_size,
vm_irq_out_callback,
&vm_boards[idx],
vm_boards[idx].irq_out_interval);
retval = usb_submit_urb(vm_boards[idx].irq_out_urb, GFP_KERNEL);
if (retval)
DBGCM("comedi#: vmk80xx: device reset failed (err #%d)\n",
retval);
else
DBGCM("comedi#: vmk80xx: device reset success\n");
size = le16_to_cpu(dev->ep_rx->wMaxPacketSize);
dev->usb_rx_buf = kmalloc(size, GFP_KERNEL);
if (!dev->usb_rx_buf) {
mutex_unlock(&glb_mutex);
return -ENOMEM;
}
size = le16_to_cpu(dev->ep_tx->wMaxPacketSize);
dev->usb_tx_buf = kmalloc(size, GFP_KERNEL);
if (!dev->usb_tx_buf) {
kfree(dev->usb_rx_buf);
mutex_unlock(&glb_mutex);
return -ENOMEM;
}
usb_set_intfdata(itf, &vm_boards[idx]);
dev->udev = interface_to_usbdev(intf);
dev->intf = intf;
sema_init(&dev->limit_sem, 8);
init_waitqueue_head(&dev->read_wait);
init_waitqueue_head(&dev->write_wait);
init_usb_anchor(&dev->rx_anchor);
init_usb_anchor(&dev->tx_anchor);
usb_set_intfdata(intf, dev);
switch (id->driver_info) {
case DEVICE_VMK8055:
dev->board.name = "K8055 (VM110)";
dev->board.model = VMK8055_MODEL;
dev->board.range = &vmk8055_range;
dev->board.ai_chans = 2;
dev->board.ai_bits = 8;
dev->board.ao_chans = 2;
dev->board.ao_bits = 8;
dev->board.di_chans = 5;
dev->board.di_bits = 1;
dev->board.do_chans = 8;
dev->board.do_bits = 1;
dev->board.cnt_chans = 2;
dev->board.cnt_bits = 16;
dev->board.pwm_chans = 0;
dev->board.pwm_bits = 0;
break;
case DEVICE_VMK8061:
dev->board.name = "K8061 (VM140)";
dev->board.model = VMK8061_MODEL;
dev->board.range = &vmk8061_range;
dev->board.ai_chans = 8;
dev->board.ai_bits = 10;
dev->board.ao_chans = 8;
dev->board.ao_bits = 8;
dev->board.di_chans = 8;
dev->board.di_bits = 1;
dev->board.do_chans = 8;
dev->board.do_bits = 1;
dev->board.cnt_chans = 2;
dev->board.cnt_bits = 0;
dev->board.pwm_chans = 1;
dev->board.pwm_bits = 10;
break;
}
/* Show some debugging messages if required */
DBGCM("comedi#: vmk80xx: [<-] ep addr 0x%02x size %d interval %d\n",
vm_boards[idx].irq_in_endpoint,
vm_boards[idx].irq_in_endpoint_size,
vm_boards[idx].irq_in_interval);
DBGCM("comedi#: vmk80xx: [->] ep addr 0x%02x size %d interval %d\n",
vm_boards[idx].irq_out_endpoint,
vm_boards[idx].irq_out_endpoint_size,
vm_boards[idx].irq_out_interval);
if (dev->board.model == VMK8061_MODEL) {
vmk80xx_read_eeprom(dev, IC3_VERSION);
printk(KERN_INFO "comedi#: vmk80xx: %s\n",
dev->fw.ic3_vers);
if (vmk80xx_check_data_link(dev)) {
vmk80xx_read_eeprom(dev, IC6_VERSION);
printk(KERN_INFO "comedi#: vmk80xx: %s\n",
dev->fw.ic6_vers);
} else
dbgcm("comedi#: vmk80xx: no conn. to CPU\n");
}
vm_boards[idx].id = idx;
if (dev->board.model == VMK8055_MODEL)
vmk80xx_reset_device(dev);
/* Let the user know that the device is now attached */
printk("comedi#: vmk80xx: K8055 board #%d now attached\n",
vm_boards[idx].id);
dev->probed = 1;
/* We have an attached velleman board */
vm_boards[idx].probed = 1;
printk(KERN_INFO "comedi#: vmk80xx: board #%d [%s] now attached\n",
dev->count, dev->board.name);
mutex_unlock(&glb_mutex);
return retval;
return 0;
error:
vm_delete(&vm_boards[idx]);
mutex_unlock(&glb_mutex);
return retval;
return -ENODEV;
}
static void vm_disconnect(struct usb_interface *intf)
static void vmk80xx_disconnect(struct usb_interface *intf)
{
struct vmk80xx_usb *vm;
struct vmk80xx_usb *dev = usb_get_intfdata(intf);
DBGVM("comedi#: vmk80xx: %s\n", __func__);
dbgvm("vmk80xx: %s\n", __func__);
vm = (struct vmk80xx_usb *)usb_get_intfdata(intf);
if (!vm) {
printk("comedi#: vmk80xx: %s - vm is NULL\n", __func__);
return; /* -EFAULT */
}
if (!dev)
return;
mutex_lock(&glb_mutex);
/* Twill be needed if the driver supports more than one board */
down(&vm->limit_sem);
down(&dev->limit_sem);
vm->probed = 0; /* we have -1 attached boards */
usb_set_intfdata(vm->intf, NULL);
dev->probed = 0;
usb_set_intfdata(dev->intf, NULL);
vm_delete(vm); /* tidy up */
usb_kill_anchored_urbs(&dev->rx_anchor);
usb_kill_anchored_urbs(&dev->tx_anchor);
/* Twill be needed if the driver supports more than one board */
up(&vm->limit_sem);
mutex_unlock(&glb_mutex);
kfree(dev->usb_rx_buf);
kfree(dev->usb_tx_buf);
printk(KERN_INFO "comedi#: vmk80xx: board #%d [%s] now detached\n",
dev->count, dev->board.name);
printk("comedi#: vmk80xx: Velleman board #%d now detached\n",
vm->id);
up(&dev->limit_sem);
mutex_unlock(&glb_mutex);
}
/* ---------------------------------------------------------------------------
* Register/Deregister this driver with/from the usb subsystem and the comedi.
--------------------------------------------------------------------------- */
static struct usb_driver vm_driver = {
/* TODO: Add support for suspend, resume, pre_reset,
* post_reset and flush */
static struct usb_driver vmk80xx_driver = {
.name = "vmk80xx",
.probe = vm_probe,
.disconnect = vm_disconnect,
.id_table = vm_id_table,
.probe = vmk80xx_probe,
.disconnect = vmk80xx_disconnect,
.id_table = vmk80xx_id_table
};
static struct comedi_driver driver_vm = {
static struct comedi_driver driver_vmk80xx = {
.module = THIS_MODULE,
.driver_name = "vmk80xx",
.attach = vm_attach,
.detach = vm_detach,
.attach = vmk80xx_attach,
.detach = vmk80xx_detach
};
static int __init vm_init(void)
static int __init vmk80xx_init(void)
{
int retval, idx;
printk("vmk80xx: version " VMK80XX_MODULE_VERSION " -"
" Manuel Gebele <forensixs@gmx.de>\n");
for (idx = 0; idx < VMK8055_MAX_BOARDS; idx++) {
memset(&vm_boards[idx], 0x00, sizeof(vm_boards[idx]));
init_MUTEX(&vm_boards[idx].limit_sem);
init_waitqueue_head(&vm_boards[idx].read_wait);
init_waitqueue_head(&vm_boards[idx].write_wait);
}
/* Register with the usb subsystem */
retval = usb_register(&vm_driver);
if (retval) {
err("vmk80xx: usb subsystem registration failed (err #%d)\n",
retval);
return retval;
}
/* Register with the comedi core */
retval = comedi_driver_register(&driver_vm);
if (retval) {
err("vmk80xx: comedi core registration failed (err #%d)\n",
retval);
usb_deregister(&vm_driver);
}
return retval;
printk(KERN_INFO "vmk80xx: version 0.8.01 "
"Manuel Gebele <forensixs@gmx.de>\n");
usb_register(&vmk80xx_driver);
return comedi_driver_register(&driver_vmk80xx);
}
static void __exit vm_exit(void)
static void __exit vmk80xx_exit(void)
{
comedi_driver_unregister(&driver_vm);
usb_deregister(&vm_driver);
comedi_driver_unregister(&driver_vmk80xx);
usb_deregister(&vmk80xx_driver);
}
module_init(vm_init);
module_exit(vm_exit);
module_init(vmk80xx_init);
module_exit(vmk80xx_exit);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7